[PATCH 5.15 038/148] usb: dwc3: core: leave default DMA if the controller does not support 64-bit DMA

From: Greg Kroah-Hartman
Date: Mon Sep 26 2022 - 07:12:28 EST


From: William Wu <william.wu@xxxxxxxxxxxxxx>

commit 91062e663b261815573ce00967b1895a99e668df upstream.

On some DWC3 controllers (e.g. Rockchip SoCs), the DWC3 core
doesn't support 64-bit DMA address width. In this case, this
driver should use the default 32-bit mask. Otherwise, the DWC3
controller will break if it runs on above 4GB physical memory
environment.

This patch reads the DWC_USB3_AWIDTH bits of GHWPARAMS0 which
used for the DMA address width, and only configure 64-bit DMA
mask if the DWC_USB3_AWIDTH is 64.

Fixes: 45d39448b4d0 ("usb: dwc3: support 64 bit DMA in platform driver")
Cc: stable <stable@xxxxxxxxxx>
Reviewed-by: Sven Peter <sven@xxxxxxxxxxxxx>
Signed-off-by: William Wu <william.wu@xxxxxxxxxxxxxx>
Link: https://lore.kernel.org/r/20220901083446.3799754-1-william.wu@xxxxxxxxxxxxxx
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/usb/dwc3/core.c | 13 +++++++------
1 file changed, 7 insertions(+), 6 deletions(-)

--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -1570,12 +1570,6 @@ static int dwc3_probe(struct platform_de

dwc3_get_properties(dwc);

- if (!dwc->sysdev_is_parent) {
- ret = dma_set_mask_and_coherent(dwc->sysdev, DMA_BIT_MASK(64));
- if (ret)
- return ret;
- }
-
dwc->reset = devm_reset_control_array_get_optional_shared(dev);
if (IS_ERR(dwc->reset))
return PTR_ERR(dwc->reset);
@@ -1612,6 +1606,13 @@ static int dwc3_probe(struct platform_de
platform_set_drvdata(pdev, dwc);
dwc3_cache_hwparams(dwc);

+ if (!dwc->sysdev_is_parent &&
+ DWC3_GHWPARAMS0_AWIDTH(dwc->hwparams.hwparams0) == 64) {
+ ret = dma_set_mask_and_coherent(dwc->sysdev, DMA_BIT_MASK(64));
+ if (ret)
+ goto disable_clks;
+ }
+
spin_lock_init(&dwc->lock);
mutex_init(&dwc->mutex);