Re: [PATCH net-next v3 2/2] ARM: dts: aspeed: elbert: Enable mac3 controller

[Andrew Lunn]

On Tue, Sep 06, 2022 at 10:44:53PM -0700, rentao.bupt@xxxxxxxxx wrote:
> From: Tao Ren <rentao.bupt@xxxxxxxxx>
> 
> Enable mac3 controller in Elbert dts: Elbert MAC3 is connected to the
> BCM53134P onboard switch's IMP_RGMII port directly (fixed link, no PHY
> between BMC MAC and BCM53134P).
> 
> Note: BMC's mdio0 controller is connected to BCM53134P's MDIO interface,
> and the MDIO channel will be enabled later, when BCM53134 is added to
> "bcm53xx" DSA driver.
> 
> Signed-off-by: Tao Ren <rentao.bupt@xxxxxxxxx>

Reviewed-by: Andrew Lunn <andrew@xxxxxxx>

    Andrew