[PATCH 08/16] phy: qcom-qmp-ufs: drop unused defines

[Johan Hovold]

Drop defines and enums that are unused since the QMP driver split.

Signed-off-by: Johan Hovold <johan+linaro@xxxxxxxxxx>
---
 drivers/phy/qualcomm/phy-qcom-qmp-ufs.c | 34 +------------------------
 1 file changed, 1 insertion(+), 33 deletions(-)

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
index 7bd3c992b841..62e9007137c9 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
@@ -28,39 +28,15 @@
 #define SW_RESET				BIT(0)
 /* QPHY_POWER_DOWN_CONTROL */
 #define SW_PWRDN				BIT(0)
-#define REFCLK_DRV_DSBL				BIT(1)
 /* QPHY_START_CONTROL bits */
 #define SERDES_START				BIT(0)
 #define PCS_START				BIT(1)
-#define PLL_READY_GATE_EN			BIT(3)
 /* QPHY_PCS_STATUS bit */
 #define PHYSTATUS				BIT(6)
-#define PHYSTATUS_4_20				BIT(7)
-/* QPHY_PCS_READY_STATUS & QPHY_COM_PCS_READY_STATUS bit */
+/* QPHY_PCS_READY_STATUS bit */
 #define PCS_READY				BIT(0)
 
-/* QPHY_V3_DP_COM_RESET_OVRD_CTRL register bits */
-/* DP PHY soft reset */
-#define SW_DPPHY_RESET				BIT(0)
-/* mux to select DP PHY reset control, 0:HW control, 1: software reset */
-#define SW_DPPHY_RESET_MUX			BIT(1)
-/* USB3 PHY soft reset */
-#define SW_USB3PHY_RESET			BIT(2)
-/* mux to select USB3 PHY reset control, 0:HW control, 1: software reset */
-#define SW_USB3PHY_RESET_MUX			BIT(3)
-
-/* QPHY_V3_DP_COM_PHY_MODE_CTRL register bits */
-#define USB3_MODE				BIT(0) /* enables USB3 mode */
-#define DP_MODE					BIT(1) /* enables DP mode */
-
-/* QPHY_V3_PCS_MISC_CLAMP_ENABLE register bits */
-#define CLAMP_EN				BIT(0) /* enables i/o clamp_n */
-
 #define PHY_INIT_COMPLETE_TIMEOUT		10000
-#define POWER_DOWN_DELAY_US_MIN			10
-#define POWER_DOWN_DELAY_US_MAX			11
-
-#define MAX_PROP_NAME				32
 
 /* Define the assumed distance between lanes for underspecified device trees. */
 #define QMP_PHY_LEGACY_LANE_STRIDE		0x400
@@ -104,19 +80,11 @@ struct qmp_phy_init_tbl {
 
 /* set of registers with offsets different per-PHY */
 enum qphy_reg_layout {
-	/* Common block control registers */
-	QPHY_COM_SW_RESET,
-	QPHY_COM_POWER_DOWN_CONTROL,
-	QPHY_COM_START_CONTROL,
-	QPHY_COM_PCS_READY_STATUS,
 	/* PCS registers */
 	QPHY_SW_RESET,
 	QPHY_START_CTRL,
 	QPHY_PCS_READY_STATUS,
-	QPHY_PCS_STATUS,
 	QPHY_PCS_POWER_DOWN_CONTROL,
-	/* PCS_MISC registers */
-	QPHY_PCS_MISC_TYPEC_CTRL,
 	/* Keep last to ensure regs_layout arrays are properly initialized */
 	QPHY_LAYOUT_SIZE
 };
-- 
2.35.1