Re: [PATCH net-next 2/5] net: hns3: support ndo_select_queue()

From: huangguangbin (A)
Date: Tue Sep 06 2022 - 20:57:29 EST




On 2022/9/6 21:15, Paolo Abeni wrote:
On Mon, 2022-09-05 at 16:15 +0800, Guangbin Huang wrote:
To support tx packets to select queue according to its dscp field after
setting dscp and tc map relationship, this patch implements
ndo_select_queue() to set skb->priority according to the user's setting
dscp and priority map relationship.

Signed-off-by: Guangbin Huang <huangguangbin2@xxxxxxxxxx>
---
.../net/ethernet/hisilicon/hns3/hns3_enet.c | 46 +++++++++++++++++++
1 file changed, 46 insertions(+)

diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
index 481a300819ad..82f83e3f8162 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
@@ -2963,6 +2963,51 @@ static int hns3_nic_set_vf_mac(struct net_device *netdev, int vf_id, u8 *mac)
return h->ae_algo->ops->set_vf_mac(h, vf_id, mac);
}
+#define HNS3_INVALID_DSCP 0xff
+#define HNS3_DSCP_SHIFT 2
+
+static u8 hns3_get_skb_dscp(struct sk_buff *skb)
+{
+ __be16 protocol = skb->protocol;
+ u8 dscp = HNS3_INVALID_DSCP;
+
+ if (protocol == htons(ETH_P_8021Q))
+ protocol = vlan_get_protocol(skb);
+
+ if (protocol == htons(ETH_P_IP))
+ dscp = ipv4_get_dsfield(ip_hdr(skb)) >> HNS3_DSCP_SHIFT;
+ else if (protocol == htons(ETH_P_IPV6))
+ dscp = ipv6_get_dsfield(ipv6_hdr(skb)) >> HNS3_DSCP_SHIFT;
+
+ return dscp;
+}
+
+static u16 hns3_nic_select_queue(struct net_device *netdev,
+ struct sk_buff *skb,
+ struct net_device *sb_dev)
+{
+ struct hnae3_handle *h = hns3_get_handle(netdev);
+ u8 dscp, priority;
+ int ret;
+
+ if (h->kinfo.tc_map_mode != HNAE3_TC_MAP_MODE_DSCP ||
+ !h->ae_algo->ops->get_dscp_prio)
+ goto out;
+
+ dscp = hns3_get_skb_dscp(skb);
+ if (unlikely(dscp == HNS3_INVALID_DSCP))
+ goto out;
+
+ ret = h->ae_algo->ops->get_dscp_prio(h, dscp, NULL, &priority);

This introduces an additional, unneeded indirect call in the fast path,
you could consider replacing the above with a direct call to
hclge_get_dscp_prio() - again taking care of the CONFIG_HNS3_DCB
dependency.

Cheers,

Paolo

.

Ok.