[PATCH v4] Common clock: To list active consumers of clocks

[Vishal Badole]

This feature lists the clock consumer's name and respective connection
id. Using this feature user can easily check that which user has
acquired and enabled a particular clock.

Co-developed-by: Chinmoy Ghosh <chinmoyghosh2001@xxxxxxxxx>
Signed-off-by: Chinmoy Ghosh <chinmoyghosh2001@xxxxxxxxx>
Co-developed-by: Mintu Patel <mintupatel89@xxxxxxxxx>
Signed-off-by: Mintu Patel <mintupatel89@xxxxxxxxx>
Co-developed-by: Vimal Kumar <vimal.kumar32@xxxxxxxxx>
Signed-off-by: Vimal Kumar <vimal.kumar32@xxxxxxxxx>
Signed-off-by: Vishal Badole <badolevishal1116@xxxxxxxxx>
---
 drivers/clk/clk.c | 34 ++++++++++++++++++++++++----------
 1 file changed, 24 insertions(+), 10 deletions(-)

diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
index f00d4c1..db48f84 100644
--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -2953,28 +2953,41 @@ static void clk_summary_show_one(struct seq_file *s, struct clk_core *c,
 				 int level)
 {
 	int phase;
+	struct clk *clk_user;
+	int multi_node = 0;
 
-	seq_printf(s, "%*s%-*s %7d %8d %8d %11lu %10lu ",
+	seq_printf(s, "%*s%-*s %-7d %-8d %-8d %-11lu %-10lu ",
 		   level * 3 + 1, "",
-		   30 - level * 3, c->name,
+		   35 - level * 3, c->name,
 		   c->enable_count, c->prepare_count, c->protect_count,
 		   clk_core_get_rate_recalc(c),
 		   clk_core_get_accuracy_recalc(c));
 
 	phase = clk_core_get_phase(c);
 	if (phase >= 0)
-		seq_printf(s, "%5d", phase);
+		seq_printf(s, "%-5d", phase);
 	else
 		seq_puts(s, "-----");
 
-	seq_printf(s, " %6d", clk_core_get_scaled_duty_cycle(c, 100000));
+	seq_printf(s, " %-6d", clk_core_get_scaled_duty_cycle(c, 100000));
 
 	if (c->ops->is_enabled)
-		seq_printf(s, " %9c\n", clk_core_is_enabled(c) ? 'Y' : 'N');
+		seq_printf(s, " %5c ", clk_core_is_enabled(c) ? 'Y' : 'N');
 	else if (!c->ops->enable)
-		seq_printf(s, " %9c\n", 'Y');
+		seq_printf(s, " %5c ", 'Y');
 	else
-		seq_printf(s, " %9c\n", '?');
+		seq_printf(s, " %5c ", '?');
+
+	hlist_for_each_entry(clk_user, &c->clks, clks_node) {
+		seq_printf(s, "%*s%-*s  %-25s\n",
+			   level * 3 + 2 + 105 * multi_node, "",
+			   30,
+			   clk_user->dev_id ? clk_user->dev_id : "deviceless",
+			   clk_user->con_id ? clk_user->con_id : "no_connection_id");
+
+		multi_node = 1;
+	}
+
 }
 
 static void clk_summary_show_subtree(struct seq_file *s, struct clk_core *c,
@@ -2995,9 +3008,10 @@ static int clk_summary_show(struct seq_file *s, void *data)
 	struct clk_core *c;
 	struct hlist_head **lists = (struct hlist_head **)s->private;
 
-	seq_puts(s, "                                 enable  prepare  protect                                duty  hardware\n");
-	seq_puts(s, "   clock                          count    count    count        rate   accuracy phase  cycle    enable\n");
-	seq_puts(s, "-------------------------------------------------------------------------------------------------------\n");
+	seq_puts(s, "                                 enable  prepare  protect                                duty  hardware                            connection\n");
+	seq_puts(s, "   clock                          count    count    count        rate   accuracy phase  cycle    enable   consumer                         id\n");
+	seq_puts(s, "---------------------------------------------------------------------------------------------------------------------------------------------\n");
+
 
 	clk_prepare_lock();
 
-- 
2.7.4