Re: [PATCH v4 2/3] iio: adc: tsc2046: add vref support

[Andy Shevchenko]

On Fri, Sep 2, 2022 at 4:19 PM Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx> wrote:
>
> If VREF pin is attached, we should use external VREF source instead of
> the internal. Otherwise we will get wrong measurements on some of channel

the channel

> types.

Below are minor changes, not sure if you need a new version for that.

...

> +       priv->vref_reg = devm_regulator_get_optional(dev, "vref");

> +       if (IS_ERR(priv->vref_reg) && PTR_ERR(priv->vref_reg) != -ENODEV)
> +               return PTR_ERR(priv->vref_reg);
> +
> +       if (IS_ERR_OR_NULL(priv->vref_reg)) {
> +               priv->vref_reg = NULL;
> +               /* Use internal reference */
> +               priv->vref_mv = TI_TSC2046_INT_VREF;
> +               return 0;
> +       }

This can be refactored now

       if (IS_ERR(priv->vref_reg)) {
           /* If regulator exists but can't be get, return an error */
           if (PTR_ERR(priv->vref_reg) != -ENODEV)
               return PTR_ERR(priv->vref_reg);
           priv->vref_reg = NULL;
       }
       if (!priv->vref_reg) {
               /* Use internal reference */
               priv->vref_mv = TI_TSC2046_INT_VREF;
               return 0;
       }

...

> +       ret = devm_add_action_or_reset(dev, tsc2046_adc_regulator_disable,
> +                                      priv);

I believe it's fine to be on one line.

> +       if (ret)
> +               return ret;

...

> +       priv->vref_mv = ret / 1000;

MILLI?


-- 
With Best Regards,
Andy Shevchenko