Re: [PATCH 0/3] Enable initial support for StarFive VisionFive V1 SBC

From: Cristian Ciocaltea
Date: Fri Sep 02 2022 - 06:13:47 EST



On 9/2/22 09:27, Conor.Dooley@xxxxxxxxxxxxx wrote:
On 01/09/2022 23:42, Cristian Ciocaltea wrote:
[You don't often get email from cristian.ciocaltea@xxxxxxxxxxxxx. Learn why this is important at https://aka.ms/LearnAboutSenderIdentification ]

EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe

The StarFive VisionFive V1 SBC [1] is similar with the already supported
BeagleV Starlight Beta board, both being based on the StarFive JH7100 SoC.

In addition to documenting the necessary compatibles, this patch series
moves most of the content from jh7100-beaglev-starlight.dts to a new file
jh7100-common.dtsi, to be shared between the two boards.

No other changes are required in order to successfully boot the board.

Gave it a go this morning, dts stuff itself looks good to me. No new
warnings, although that's to be expected, & boots fine.

I know that most jn7100 stuff is not really wanted upstream, but I'd
say that the minimal vision5 dts is an exception to that, so with the
one comment on patch 1 resolved:

Reviewed-by: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>

Thanks for the quick review, I have submitted v2:

https://lore.kernel.org/all/20220902100806.2378543-1-cristian.ciocaltea@xxxxxxxxxxxxx/

Regards,
Cristian

Thanks,
Conor.


[1] https://github.com/starfive-tech/VisionFive

Cristian Ciocaltea (3):
dt-bindings: riscv: starfive: Add StarFive VisionFive V1 board
riscv: dts: starfive: Add common DT for JH7100 based boards
riscv: dts: starfive: Add StarFive VisionFive V1 device tree

.../devicetree/bindings/riscv/starfive.yaml | 3 +
arch/riscv/boot/dts/starfive/Makefile | 2 +-
.../dts/starfive/jh7100-beaglev-starlight.dts | 153 +----------------
.../boot/dts/starfive/jh7100-common.dtsi | 161 ++++++++++++++++++
.../jh7100-starfive-visionfive-v1.dts | 20 +++
5 files changed, 186 insertions(+), 153 deletions(-)
create mode 100644 arch/riscv/boot/dts/starfive/jh7100-common.dtsi
create mode 100644 arch/riscv/boot/dts/starfive/jh7100-starfive-visionfive-v1.dts

--
2.37.2


_______________________________________________
linux-riscv mailing list
linux-riscv@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/linux-riscv