Re: [PATCH v2 2/3] iommu/mediatek: Add enable IOMMU SMC command for INFRA master

[AngeloGioacchino Del Regno]

Il 31/08/22 14:55, Chengci.Xu ha scritto:
> The register which can enable IOMMU for INFRA master should be setted
> in secure world for security concerns. Therefore, we add a SMC command
> for INFRA master to enable/disable INFRA IOMMU in ATF. This function is
> prepared for MT8188.
>
> Signed-off-by: Chengci.Xu <chengci.xu@xxxxxxxxxxxx>
> ---
>   drivers/iommu/mtk_iommu.c  | 34 ++++++++++++++++++++++++++--------
>   include/soc/mediatek/smi.h |  1 +
>   2 files changed, 27 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
> index 7e363b1f24df..6fe780783ec8 100644
> --- a/drivers/iommu/mtk_iommu.c
> +++ b/drivers/iommu/mtk_iommu.c
> @@ -3,6 +3,7 @@
>    * Copyright (c) 2015-2016 MediaTek Inc.
>    * Author: Yong Wu <yong.wu@xxxxxxxxxxxx>
>    */
> +#include <linux/arm-smccc.h>
>   #include <linux/bitfield.h>
>   #include <linux/bug.h>
>   #include <linux/clk.h>
> @@ -28,6 +29,7 @@
>   #include <linux/slab.h>
>   #include <linux/spinlock.h>
>   #include <linux/soc/mediatek/infracfg.h>
> +#include <linux/soc/mediatek/mtk_sip_svc.h>
>   #include <asm/barrier.h>
>   #include <soc/mediatek/smi.h>
>   
> @@ -138,6 +140,7 @@
>   #define PM_CLK_AO			BIT(15)
>   #define IFA_IOMMU_PCIE_SUPPORT		BIT(16)
>   #define PGTABLE_PA_35_EN		BIT(17)
> +#define CFG_IFA_MASTER_IN_ATF		BIT(18)
>   
>   #define MTK_IOMMU_HAS_FLAG_MASK(pdata, _x, mask)	\
>   				((((pdata)->flags) & (mask)) == (_x))
> @@ -554,14 +557,29 @@ static int mtk_iommu_config(struct mtk_iommu_data *data, struct device *dev,
>   			else
>   				larb_mmu->mmu &= ~MTK_SMI_MMU_EN(portid);
>   		} else if (MTK_IOMMU_IS_TYPE(data->plat_data, MTK_IOMMU_TYPE_INFRA)) {
> -			peri_mmuen_msk = BIT(portid);
> -			/* PCI dev has only one output id, enable the next writing bit for PCIe */
> -			if (dev_is_pci(dev))
> -				peri_mmuen_msk |= BIT(portid + 1);
> -
> -			peri_mmuen = enable ? peri_mmuen_msk : 0;
> -			ret = regmap_update_bits(data->pericfg, PERICFG_IOMMU_1,
> -						 peri_mmuen_msk, peri_mmuen);
> +			if (MTK_IOMMU_HAS_FLAG(data->plat_data, CFG_IFA_MASTER_IN_ATF)) {
> +				struct arm_smccc_res res;
> +
> +				portid = MTK_M4U_TO_PORT(fwspec->ids[i]);

This assignment is redundant, as portid is initialized to the same value
just a few lines before. Please drop it.

Everything else looks good.

Regards,
Angelo

> +				arm_smccc_smc(MTK_SIP_KERNEL_IOMMU_CONTROL,
> +					      IOMMU_ATF_CMD_CONFIG_INFRA_IOMMU,
> +					      portid, enable, 0, 0, 0, 0, &res);
> +				ret = (int)res.a0;