Re: [PATCH v2 1/2] gpio: Add gpio latch driver

[Sascha Hauer]

On Fri, Sep 02, 2022 at 09:42:21AM +0300, Andy Shevchenko wrote:
> On Wed, Aug 31, 2022 at 9:02 AM Sascha Hauer <s.hauer@xxxxxxxxxxxxxx> wrote:
> >
> > This driver implements a GPIO multiplexer based on latches connected to
> > other GPIOs. A set of data GPIOs is connected to the data input of
> > multiple latches. The clock input of each latch is driven by another
> > set of GPIOs. With two 8-bit latches 10 GPIOs can be multiplexed into
> > 16 GPIOs. GPOs might be a better term as in fact the multiplexed pins
> > are output only.
> 
> So, this is for only one type of latches, now I'm wondering why
> gpio-74xx-mmio can't cover this case (with probably small
> modifications to the code)?

gpio-74xx-mmio is about latches connected to a parallel bus. You can
access the GPIOs by doing readl/writel operations. The latches are
driven by the bus logic and likely an additional address decoder.

What I have here instead is a latch fully driven by GPIOs.

Yes, with enough force you could implement it in the gpio-74xx-mmio
driver, but that wouldn't be mmio at all and likely completely different
code pathes.

Sascha

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |