Re: [PATCH v3 17/19] hwmon: (mr75203) parse temperature coefficients from device-tree

[Andy Shevchenko]

On Tue, Aug 30, 2022 at 07:22:10PM +0000, Eliav Farber wrote:
> Use thermal coefficients from the device tree if they exist.
> Otherwise, use default values according to the series (5 or 6).
> All coefficients can be used or only part of them.
> 
> The coefficients shall be used for fine tuning the default values since
> coefficients can vary between product and product.

...

> +	ret = of_property_read_u32(np, "moortec,ts-coeff-h", &coeff_h);

of_ ?! Ditto for the rest.

> +	if (!ret)
> +		ts_coeff->h = coeff_h;

...

> +	ret = of_property_read_s32(np, "moortec,ts-coeff-j", &coeff_j);
> +	if (!ret)
> +		ts_coeff->j = coeff_j;

You may avoid conditional:

	_property_read_s32(..., "moortec,ts-coeff-j", &ts_coeff->j);


...

> +	ret = of_property_read_u32(np, "moortec,ts-coeff-cal5", &coeff_cal5);
> +	if (!ret) {

> +		if (coeff_cal5 == 0) {
> +			dev_err(dev, "moortec,ts-coeff-cal5 can't be 0\n");
> +			return -EINVAL;
> +		}

Code shouldn't be a YAML validator. Drop this and make sure you have correct
DT schema.

> +		ts_coeff->cal5 = coeff_cal5;
> +	}

Also see above.

-- 
With Best Regards,
Andy Shevchenko