Re: [PATCH v8 018/103] KVM: TDX: Stub in tdx.h with structs, accessors, and VMCS helpers

[Yuan Yao]

On Thu, Aug 25, 2022 at 09:48:17PM -0700, Isaku Yamahata wrote:
> On Tue, Aug 23, 2022 at 03:40:40PM +0000,
> Sean Christopherson <seanjc@xxxxxxxxxx> wrote:
>
> > On Tue, Aug 23, 2022, Binbin Wu wrote:
> > >
> > > On 2022/8/8 6:01, isaku.yamahata@xxxxxxxxx wrote:
> > > > +static __always_inline void tdvps_vmcs_check(u32 field, u8 bits)
> > > > +{
> > > > +	BUILD_BUG_ON_MSG(__builtin_constant_p(field) && (field) & 0x1,
> > > > +			 "Read/Write to TD VMCS *_HIGH fields not supported");
> > > > +
> > > > +	BUILD_BUG_ON(bits != 16 && bits != 32 && bits != 64);
> > > > +
> > > > +	BUILD_BUG_ON_MSG(bits != 64 && __builtin_constant_p(field) &&
> > > > +			 (((field) & 0x6000) == 0x2000 ||
> > > > +			  ((field) & 0x6000) == 0x6000),
> > > > +			 "Invalid TD VMCS access for 64-bit field");
> > >
> > > if bits is 64 here, "bits != 64" is false, how could this check for "Invalid
> > > TD VMCS access for 64-bit field"?
> >
> > Bits 14:13 of the encoding, which is extracted by "(field) & 0x6000", encodes the
> > width of the VMCS field.  Bit 0 of the encoding, "(field) & 0x1" above, is a modifier
> > that is only relevant when operating in 32-bit mode, and is disallowed because TDX is
> > 64-bit only.
> >
> > This yields four possibilities for TDX:
> >
> >   (field) & 0x6000) == 0x0000 : 16-bit field
> >   (field) & 0x6000) == 0x2000 : 64-bit field
> >   (field) & 0x6000) == 0x4000 : 32-bit field
> >   (field) & 0x6000) == 0x6000 : 64-bit field (technically "natural width", but
> >                                               effectively 64-bit because TDX is
> > 					      64-bit only)
> >
> > The assertion is that if the encoding indicates a 64-bit field (0x2000 or 0x6000),
> > then the number of bits KVM is accessing must be '64'.  The below assertions do
> > the same thing for 32-bit and 16-bit fields.
>
> Thanks for explanation. I've updated it as follows to use symbolic value.
>
> #define VMCS_ENC_ACCESS_TYPE_MASK	0x1UL
> #define VMCS_ENC_ACCESS_TYPE_FULL	0x0UL
> #define VMCS_ENC_ACCESS_TYPE_HIGH	0x1UL
> #define VMCS_ENC_ACCESS_TYPE(field)	((field) & VMCS_ENC_ACCESS_TYPE_MASK)
>
> 	/* TDX is 64bit only.  HIGH field isn't supported. */
> 	BUILD_BUG_ON_MSG(__builtin_constant_p(field) &&
> 			 VMCS_ENC_ACCESS_TYPE(field) == VMCS_ENC_ACCESS_TYPE_HIGH,
> 			 "Read/Write to TD VMCS *_HIGH fields not supported");
>
> 	BUILD_BUG_ON(bits != 16 && bits != 32 && bits != 64);
>
> #define VMCS_ENC_WIDTH_MASK	GENMASK_UL(14, 13)
> #define VMCS_ENC_WIDTH_16BIT	(0UL << 13)
> #define VMCS_ENC_WIDTH_64BIT	(1UL << 13)
> #define VMCS_ENC_WIDTH_32BIT	(2UL << 13)
> #define VMCS_ENC_WIDTH_NATURAL	(3UL << 13)
> #define VMCS_ENC_WIDTH(field)	((field) & VMCS_ENC_WIDTH_MASK)
>
> 	/* TDX is 64bit only.  i.e. natural width = 64bit. */
> 	BUILD_BUG_ON_MSG(bits != 64 && __builtin_constant_p(field) &&
> 			 (VMCS_ENC_WIDTH(field) == VMCS_ENC_WIDTH_64BIT ||
> 			  VMCS_ENC_WIDTH(field) == VMCS_ENC_WIDTH_NATURAL),
> 			 "Invalid TD VMCS access for 64-bit field");
> 	BUILD_BUG_ON_MSG(bits != 32 && __builtin_constant_p(field) &&
> 			 VMCS_ENC_WIDTH(field) == VMCS_ENC_WIDTH_32BIT,
> 			 "Invalid TD VMCS access for 32-bit field");
> 	BUILD_BUG_ON_MSG(bits != 16 && __builtin_constant_p(field) &&
> 			 VMCS_ENC_WIDTH(field) == VMCS_ENC_WIDTH_16BIT,
> 			 "Invalid TD VMCS access for 16-bit field");
>

These are standard VMCS definition, I suggest to put them into
arch/x86/kvm/vmx/vmcs.h but not only in tdx.h, actually you can find
an already defined "enum vmcs_field_width" there.


> --
> Isaku Yamahata <isaku.yamahata@xxxxxxxxx>