[PATCH v2] watchdog: w83627hf_wdt: add bootstatus support

From: Henning Schild
Date: Wed Aug 24 2022 - 11:25:26 EST


The status bit in the status and control register can tell us whether
the last reboot was caused by the watchdog. Make sure to take that into
the bootstatus before clearing it.

Reviewed-by: Guenter Roeck <linux@xxxxxxxxxxxx>
Signed-off-by: Henning Schild <henning.schild@xxxxxxxxxxx>
---
drivers/watchdog/w83627hf_wdt.c | 12 ++++++++++--
1 file changed, 10 insertions(+), 2 deletions(-)

diff --git a/drivers/watchdog/w83627hf_wdt.c b/drivers/watchdog/w83627hf_wdt.c
index 56a4a4030ca9..bc33b63c5a5d 100644
--- a/drivers/watchdog/w83627hf_wdt.c
+++ b/drivers/watchdog/w83627hf_wdt.c
@@ -113,6 +113,10 @@ MODULE_PARM_DESC(early_disable, "Disable watchdog at boot time (default=0)");
#define W836X7HF_WDT_CSR 0xf7
#define NCT6102D_WDT_CSR 0xf2

+#define WDT_CSR_STATUS 0x10
+#define WDT_CSR_KBD 0x40
+#define WDT_CSR_MOUSE 0x80
+
static void superio_outb(int reg, int val)
{
outb(reg, WDT_EFER);
@@ -244,8 +248,12 @@ static int w83627hf_init(struct watchdog_device *wdog, enum chips chip)
t = superio_inb(cr_wdt_control) & ~0x0C;
superio_outb(cr_wdt_control, t);

- /* reset trigger, disable keyboard & mouse turning off watchdog */
- t = superio_inb(cr_wdt_csr) & ~0xD0;
+ t = superio_inb(cr_wdt_csr);
+ if (t & WDT_CSR_STATUS)
+ wdog->bootstatus |= WDIOF_CARDRESET;
+
+ /* reset status, disable keyboard & mouse turning off watchdog */
+ t &= ~(WDT_CSR_STATUS | WDT_CSR_KBD | WDT_CSR_MOUSE);
superio_outb(cr_wdt_csr, t);

superio_exit();
--
2.35.1