Re: [PATCH 2/4] bindings: fpga: Add binding doc for the zynqmp afi config driver

[Krzysztof Kozlowski]

On 24/08/2022 06:55, Nava kishore Manne wrote:
> Xilinx Zynq US+ MPSoC platform connect the PS to the programmable
> logic(PL) through the AXI port. This AXI port helps to establish

Use subject prefixes matching the subsystem (git log --oneline -- ...).

> the data path between the PS and PL. In-order to establish the proper
> communication data path between PS and PL the AXI port data path should
> be configured with the proper Bus-width values.
> 
> This patch adds the binding document for the zynqmp afi config driver
> to handle the AXI port bus-width configurations and PS-PL resets.

Do not use "This commit/patch".
https://elixir.bootlin.com/linux/v5.17.1/source/Documentation/process/submitting-patches.rst#L95

> 
> Signed-off-by: Nava kishore Manne <nava.kishore.manne@xxxxxxx>
> ---
>  .../bindings/fpga/xlnx,zynqmp-afi-fpga.yaml   | 100 ++++++++++++++++++
>  1 file changed, 100 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/fpga/xlnx,zynqmp-afi-fpga.yaml
> 
> diff --git a/Documentation/devicetree/bindings/fpga/xlnx,zynqmp-afi-fpga.yaml b/Documentation/devicetree/bindings/fpga/xlnx,zynqmp-afi-fpga.yaml
> new file mode 100644
> index 000000000000..faae4951e991
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/fpga/xlnx,zynqmp-afi-fpga.yaml
> @@ -0,0 +1,100 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/fpga/xlnx,zynqmp-afi-fpga.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Xilinx ZynqMP AFI interface Manager.
> +
> +maintainers:
> +  - Nava kishore Manne <nava.kishore.manne@xxxxxxx>
> +
> +description: The Zynq UltraScale+ MPSoC Processing System core provides access
> +  from PL masters to PS internal peripherals, and memory through AXI FIFO
> +  interface(AFI)
> +
> +properties:
> +  compatible:
> +    items:

No items, you have only one item.

> +      - enum:
> +          - xlnx,zynqmp-afi-fpga
> +
> +  resets:
> +    description:
> +      A list of phandles for resets listed in reset-names.

You need maxItems:4

> +
> +  reset-names:
> +    items:
> +      - const: pl0-rst
> +      - const: pl1-rst
> +      - const: pl2-rst
> +      - const: pl3-rst
> +
> +patternProperties:
> +  "^xlnx,afifm[0-6]-rd-bus-width$":
> +    description: bus width used to configure the afifm-rd interface.
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    enum: [ 32, 64, 128 ]
> +
> +  "^xlnx,afifm[0-6]-wr-bus-width$":
> +    description: bus width used to configure the afifm-wr interface.
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    enum: [ 32, 64, 128 ]
> +
> +  "^xlnx,afifs-ss[0-2]-bus-width$":
> +    description: bus width used to configure the afifs interface.
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    enum: [ 32, 64, 128 ]
> +
> +required:
> +  - compatible
> +  - xlnx,afifm0-rd-bus-width
> +  - xlnx,afifm1-rd-bus-width
> +  - xlnx,afifm2-rd-bus-width
> +  - xlnx,afifm3-rd-bus-width
> +  - xlnx,afifm4-rd-bus-width
> +  - xlnx,afifm5-rd-bus-width
> +  - xlnx,afifm6-rd-bus-width
> +  - xlnx,afifm0-wr-bus-width
> +  - xlnx,afifm1-wr-bus-width
> +  - xlnx,afifm2-wr-bus-width
> +  - xlnx,afifm3-wr-bus-width
> +  - xlnx,afifm4-wr-bus-width
> +  - xlnx,afifm5-wr-bus-width
> +  - xlnx,afifm6-wr-bus-width
> +  - xlnx,afifs-ss0-bus-width
> +  - xlnx,afifs-ss1-bus-width
> +  - xlnx,afifs-ss2-bus-width
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/reset/xlnx-zynqmp-resets.h>
> +    zynqmp-afi {

Node names should be generic.
https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation



Best regards,
Krzysztof