Re: [PATCH v2 4/4] arm64: dts: allwinner: beelink-gs1: Enable GPU OPP

[Samuel Holland]

On 8/21/22 12:30 PM, Clément Péron wrote:
> Enable GPU OPP table for Beelink GS1
> 
> Signed-off-by: Clément Péron <peron.clem@xxxxxxxxx>
> ---
>  arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts | 2 ++
>  1 file changed, 2 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts
> index 6249e9e02928..20fc0584d1c6 100644
> --- a/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts
> +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts
> @@ -5,6 +5,7 @@
>  
>  #include "sun50i-h6.dtsi"
>  #include "sun50i-h6-cpu-opp.dtsi"
> +#include "sun50i-h6-gpu-opp.dtsi"
>  
>  #include <dt-bindings/gpio/gpio.h>
>  
> @@ -261,6 +262,7 @@ reg_dcdca: dcdca {
>  			};
>  
>  			reg_dcdcc: dcdcc {
> +				regulator-always-on;

Why is this necessary? This file already has:

&gpu {
	mali-supply = <&reg_dcdcc>;
	status = "okay";
};

So there is a consumer for this regulator.

Regards,
Samuel

>  				regulator-enable-ramp-delay = <32000>;
>  				regulator-min-microvolt = <810000>;
>  				regulator-max-microvolt = <1080000>;
>