Re: [PATCH net-next 1/2] dt-bindings: net: tja11xx: add nxp,refclk_in property

From: Krzysztof Kozlowski
Date: Fri Aug 19 2022 - 05:14:23 EST


On 19/08/2022 10:47, wei.fang@xxxxxxx wrote:
> From: Wei Fang <wei.fang@xxxxxxx>
>
> TJA110x REF_CLK can be configured as interface reference clock
> intput or output when the RMII mode enabled. This patch add the
> property to make the REF_CLK can be configurable.
>
> Signed-off-by: Wei Fang <wei.fang@xxxxxxx>
> ---
> .../devicetree/bindings/net/nxp,tja11xx.yaml | 17 +++++++++++++++++
> 1 file changed, 17 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/net/nxp,tja11xx.yaml b/Documentation/devicetree/bindings/net/nxp,tja11xx.yaml
> index d51da24f3505..c51ee52033e8 100644
> --- a/Documentation/devicetree/bindings/net/nxp,tja11xx.yaml
> +++ b/Documentation/devicetree/bindings/net/nxp,tja11xx.yaml
> @@ -31,6 +31,22 @@ patternProperties:
> description:
> The ID number for the child PHY. Should be +1 of parent PHY.
>
> + nxp,rmii_refclk_in:

No underscores in properties.

> + type: boolean
> + description: |
> + The REF_CLK is provided for both transmitted and receivced data

typo: received

> + in RMII mode. This clock signal is provided by the PHY and is
> + typically derived from an external 25MHz crystal. Alternatively,
> + a 50MHz clock signal generated by an external oscillator can be
> + connected to pin REF_CLK. A third option is to connect a 25MHz
> + clock to pin CLK_IN_OUT. So, the REF_CLK should be configured
> + as input or output according to the actual circuit connection.
> + If present, indicates that the REF_CLK will be configured as
> + interface reference clock input when RMII mode enabled.
> + If not present, the REF_CLK will be configured as interface
> + reference clock output when RMII mode enabled.
> + Only supported on TJA1100 and TJA1101.

Then disallow it on other variants.

Shouldn't this be just "clocks" property?


Best regards,
Krzysztof