[PATCH v7 3/5] drivers: thermal: tsens: allow configuring min and max trips

From: Robert Marko
Date: Thu Aug 18 2022 - 18:03:02 EST


IPQ8074 and IPQ6018 dont support negative trip temperatures and support
up to 204 degrees C as the max trip temperature.

So, instead of always setting the -40 as min and 120 degrees C as max
allow it to be configured as part of the features.

Signed-off-by: Robert Marko <robimarko@xxxxxxxxx>
Reviewed-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
---
drivers/thermal/qcom/tsens-8960.c | 2 ++
drivers/thermal/qcom/tsens-v0_1.c | 2 ++
drivers/thermal/qcom/tsens-v1.c | 2 ++
drivers/thermal/qcom/tsens-v2.c | 2 ++
drivers/thermal/qcom/tsens.c | 4 ++--
drivers/thermal/qcom/tsens.h | 4 ++++
6 files changed, 14 insertions(+), 2 deletions(-)

diff --git a/drivers/thermal/qcom/tsens-8960.c b/drivers/thermal/qcom/tsens-8960.c
index ee584e5b07e5..4585904fb380 100644
--- a/drivers/thermal/qcom/tsens-8960.c
+++ b/drivers/thermal/qcom/tsens-8960.c
@@ -273,6 +273,8 @@ static struct tsens_features tsens_8960_feat = {
.adc = 1,
.srot_split = 0,
.max_sensors = 11,
+ .trip_min_temp = -40000,
+ .trip_max_temp = 120000,
};

struct tsens_plat_data data_8960 = {
diff --git a/drivers/thermal/qcom/tsens-v0_1.c b/drivers/thermal/qcom/tsens-v0_1.c
index 6effb822bf3c..2c203ff374e6 100644
--- a/drivers/thermal/qcom/tsens-v0_1.c
+++ b/drivers/thermal/qcom/tsens-v0_1.c
@@ -543,6 +543,8 @@ static struct tsens_features tsens_v0_1_feat = {
.adc = 1,
.srot_split = 1,
.max_sensors = 11,
+ .trip_min_temp = -40000,
+ .trip_max_temp = 120000,
};

static const struct reg_field tsens_v0_1_regfields[MAX_REGFIELDS] = {
diff --git a/drivers/thermal/qcom/tsens-v1.c b/drivers/thermal/qcom/tsens-v1.c
index a4f561a6e582..1d7f8a80bd13 100644
--- a/drivers/thermal/qcom/tsens-v1.c
+++ b/drivers/thermal/qcom/tsens-v1.c
@@ -306,6 +306,8 @@ static struct tsens_features tsens_v1_feat = {
.adc = 1,
.srot_split = 1,
.max_sensors = 11,
+ .trip_min_temp = -40000,
+ .trip_max_temp = 120000,
};

static const struct reg_field tsens_v1_regfields[MAX_REGFIELDS] = {
diff --git a/drivers/thermal/qcom/tsens-v2.c b/drivers/thermal/qcom/tsens-v2.c
index 129cdb247381..9babc69bfd22 100644
--- a/drivers/thermal/qcom/tsens-v2.c
+++ b/drivers/thermal/qcom/tsens-v2.c
@@ -35,6 +35,8 @@ static struct tsens_features tsens_v2_feat = {
.adc = 0,
.srot_split = 1,
.max_sensors = 16,
+ .trip_min_temp = -40000,
+ .trip_max_temp = 120000,
};

static const struct reg_field tsens_v2_regfields[MAX_REGFIELDS] = {
diff --git a/drivers/thermal/qcom/tsens.c b/drivers/thermal/qcom/tsens.c
index 816769af8813..6dc8feb5c142 100644
--- a/drivers/thermal/qcom/tsens.c
+++ b/drivers/thermal/qcom/tsens.c
@@ -573,8 +573,8 @@ static int tsens_set_trips(struct thermal_zone_device *tz, int low, int high)
dev_dbg(dev, "[%u] %s: proposed thresholds: (%d:%d)\n",
hw_id, __func__, low, high);

- cl_high = clamp_val(high, -40000, 120000);
- cl_low = clamp_val(low, -40000, 120000);
+ cl_high = clamp_val(high, priv->feat->trip_min_temp, priv->feat->trip_max_temp);
+ cl_low = clamp_val(low, priv->feat->trip_min_temp, priv->feat->trip_max_temp);

high_val = tsens_mC_to_hw(s, cl_high);
low_val = tsens_mC_to_hw(s, cl_low);
diff --git a/drivers/thermal/qcom/tsens.h b/drivers/thermal/qcom/tsens.h
index 1678c5e9e60b..8dc21ca0f2a3 100644
--- a/drivers/thermal/qcom/tsens.h
+++ b/drivers/thermal/qcom/tsens.h
@@ -499,6 +499,8 @@ enum regfield_ids {
* with SROT only being available to secure boot firmware?
* @has_watchdog: does this IP support watchdog functionality?
* @max_sensors: maximum sensors supported by this version of the IP
+ * @trip_min_temp: minimum trip temperature supported by this version of the IP
+ * @trip_max_temp: maximum trip temperature supported by this version of the IP
*/
struct tsens_features {
unsigned int ver_major;
@@ -508,6 +510,8 @@ struct tsens_features {
unsigned int srot_split:1;
unsigned int has_watchdog:1;
unsigned int max_sensors;
+ int trip_min_temp;
+ int trip_max_temp;
};

/**
--
2.37.2