[PATCH v9,2/7] dt-bindings: thermal: Add dt-binding document for LVTS thermal controllers

From: bchihi
Date: Wed Aug 17 2022 - 04:09:04 EST


From: Alexandre Bailon <abailon@xxxxxxxxxxxx>

Add dt-binding document for mt8192 and mt8195 LVTS thermal controllers.

Signed-off-by: Alexandre Bailon <abailon@xxxxxxxxxxxx>
Co-developed-by: Balsam CHIHI <bchihi@xxxxxxxxxxxx>
Signed-off-by: Balsam CHIHI <bchihi@xxxxxxxxxxxx>
---
.../thermal/mediatek,lvts-thermal.yaml | 152 ++++++++++++++++++
1 file changed, 152 insertions(+)
create mode 100644 Documentation/devicetree/bindings/thermal/mediatek,lvts-thermal.yaml

diff --git a/Documentation/devicetree/bindings/thermal/mediatek,lvts-thermal.yaml b/Documentation/devicetree/bindings/thermal/mediatek,lvts-thermal.yaml
new file mode 100644
index 000000000000..31d9e220513a
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/mediatek,lvts-thermal.yaml
@@ -0,0 +1,152 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/thermal/mediatek,lvts-thermal.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek SoC LVTS thermal controller
+
+maintainers:
+ - Yu-Chia Chang <ethan.chang@xxxxxxxxxxxx>
+ - Ben Tseng <ben.tseng@xxxxxxxxxxxx>
+
+description: |
+ LVTS (Low Voltage Thermal Sensor).
+ The architecture will be first used on mt8192 and mt8195.
+
+properties:
+ compatible:
+ enum:
+ - mediatek,mt8192-lvts-ap
+ - mediatek,mt8192-lvts-mcu
+ - mediatek,mt8195-lvts-ap
+ - mediatek,mt8195-lvts-mcu
+
+ "#thermal-sensor-cells":
+ const: 1
+
+ reg:
+ maxItems: 1
+ description: LVTS instance registers.
+
+ interrupts:
+ maxItems: 1
+ description: LVTS instance interrupts.
+
+ clocks:
+ maxItems: 1
+ description: LVTS instance clock.
+
+ resets:
+ maxItems: 1
+ description: |
+ LVTS instance SW reset for HW AP/MCU domain to clean temporary data
+ on HW initialization/resume.
+
+ nvmem-cells:
+ minItems: 1
+ maxItems: 2
+ description: Calibration efuse data for LVTS
+
+ nvmem-cell-names:
+ minItems: 1
+ maxItems: 2
+ description: Calibration efuse cell names for LVTS
+
+allOf:
+ - $ref: thermal-sensor.yaml#
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - mediatek,mt8192-lvts-ap
+ - mediatek,mt8192-lvts-mcu
+ then:
+ properties:
+ nvmem-cells:
+ items:
+ - description: Calibration efuse data for LVTS
+
+ nvmem-cell-names:
+ items:
+ - const: lvts_calib_data1
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - mediatek,mt8195-lvts-ap
+ - mediatek,mt8195-lvts-mcu
+ then:
+ properties:
+ nvmem-cells:
+ items:
+ - description: Calibration efuse data 1 for LVTS
+ - description: Calibration efuse data 2 for LVTS
+
+ nvmem-cell-names:
+ items:
+ - const: lvts_calib_data1
+ - const: lvts_calib_data2
+
+required:
+ - compatible
+ - '#thermal-sensor-cells'
+ - reg
+ - interrupts
+ - clocks
+ - resets
+ - nvmem-cells
+ - nvmem-cell-names
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/clock/mt8192-clk.h>
+ #include <dt-bindings/reset/mt8192-resets.h>
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ lvts_ap: thermal-sensor@1100b000 {
+ compatible = "mediatek,mt8192-lvts-ap";
+ #thermal-sensor-cells = <1>;
+ reg = <0 0x1100b000 0 0x1000>;
+ interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&infracfg CLK_INFRA_THERM>;
+ resets = <&infracfg MT8192_INFRA_RST0_THERM_CTRL_SWRST>;
+ nvmem-cells = <&lvts_e_data1>;
+ nvmem-cell-names = "lvts_calib_data1";
+ };
+
+ lvts_mcu: thermal-sensor@11278000 {
+ compatible = "mediatek,mt8192-lvts-mcu";
+ #thermal-sensor-cells = <1>;
+ reg = <0 0x11278000 0 0x1000>;
+ interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&infracfg CLK_INFRA_THERM>;
+ resets = <&infracfg MT8192_INFRA_RST4_THERM_CTRL_MCU_SWRST>;
+ nvmem-cells = <&lvts_e_data1>;
+ nvmem-cell-names = "lvts_calib_data1";
+ };
+ };
+
+ thermal_zones: thermal-zones {
+ cpu0-thermal {
+ polling-delay = <0>;
+ polling-delay-passive = <0>;
+ thermal-sensors = <&lvts_mcu 0>;
+ };
+
+ vpu1-thermal {
+ polling-delay = <0>;
+ polling-delay-passive = <0>;
+ thermal-sensors = <&lvts_ap 0>;
+ };
+ };
--
2.34.1