[PATCH 2/2] drivers: iio: accel adxl312 and adxl314 support

From: George Mois
Date: Tue Aug 16 2022 - 07:04:40 EST


ADXL312 and ADXL314 are small, thin, low power, 3-axis accelerometers
with high resolution (13-bit) measurement up to +/-12 g and +/- 200 g
respectively.

Implement support for ADXL312 and ADXL314 by extending the ADXL313
driver.

Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/ADXL312.pdf
Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/ADXL314.pdf

Signed-off-by: George Mois <george.mois@xxxxxxxxxx>
---
drivers/iio/accel/adxl313.h | 15 ++-
drivers/iio/accel/adxl313_core.c | 164 +++++++++++++++++++++++--------
drivers/iio/accel/adxl313_spi.c | 40 +++++++-
3 files changed, 173 insertions(+), 46 deletions(-)

diff --git a/drivers/iio/accel/adxl313.h b/drivers/iio/accel/adxl313.h
index 4415f2fc07e1..7428b1f7768f 100644
--- a/drivers/iio/accel/adxl313.h
+++ b/drivers/iio/accel/adxl313.h
@@ -26,6 +26,7 @@
#define ADXL313_REG_FIFO_STATUS 0x39

#define ADXL313_DEVID0 0xAD
+#define ADXL313_DEVID0_ADXL312_314 0xE5
#define ADXL313_DEVID1 0x1D
#define ADXL313_PARTID 0xCB
#define ADXL313_SOFT_RESET 0x52
@@ -37,18 +38,28 @@
#define ADXL313_MEASUREMENT_MODE BIT(3)

#define ADXL313_RANGE_MSK GENMASK(1, 0)
-#define ADXL313_RANGE_4G 3
+#define ADXL313_RANGE_MAX 3

#define ADXL313_FULL_RES BIT(3)
#define ADXL313_SPI_3WIRE BIT(6)
#define ADXL313_I2C_DISABLE BIT(6)

+extern const struct regmap_access_table adxl312_readable_regs_table;
extern const struct regmap_access_table adxl313_readable_regs_table;
+extern const struct regmap_access_table adxl314_readable_regs_table;

+extern const struct regmap_access_table adxl312_writable_regs_table;
extern const struct regmap_access_table adxl313_writable_regs_table;
+extern const struct regmap_access_table adxl314_writable_regs_table;
+
+enum adxl313_device_type {
+ ADXL312,
+ ADXL313,
+ ADXL314,
+};

int adxl313_core_probe(struct device *dev,
struct regmap *regmap,
- const char *name,
+ const struct spi_device_id *id,
int (*setup)(struct device *, struct regmap *));
#endif /* _ADXL313_H_ */
diff --git a/drivers/iio/accel/adxl313_core.c b/drivers/iio/accel/adxl313_core.c
index afeef779e1d0..eea7d235950e 100644
--- a/drivers/iio/accel/adxl313_core.c
+++ b/drivers/iio/accel/adxl313_core.c
@@ -11,9 +11,17 @@
#include <linux/iio/iio.h>
#include <linux/module.h>
#include <linux/regmap.h>
+#include <linux/spi/spi.h>

#include "adxl313.h"

+static const struct regmap_range adxl312_readable_reg_range[] = {
+ regmap_reg_range(ADXL313_REG_DEVID0, ADXL313_REG_DEVID0),
+ regmap_reg_range(ADXL313_REG_OFS_AXIS(0), ADXL313_REG_OFS_AXIS(2)),
+ regmap_reg_range(ADXL313_REG_THRESH_ACT, ADXL313_REG_ACT_INACT_CTL),
+ regmap_reg_range(ADXL313_REG_BW_RATE, ADXL313_REG_FIFO_STATUS),
+};
+
static const struct regmap_range adxl313_readable_reg_range[] = {
regmap_reg_range(ADXL313_REG_DEVID0, ADXL313_REG_XID),
regmap_reg_range(ADXL313_REG_SOFT_RESET, ADXL313_REG_SOFT_RESET),
@@ -22,12 +30,32 @@ static const struct regmap_range adxl313_readable_reg_range[] = {
regmap_reg_range(ADXL313_REG_BW_RATE, ADXL313_REG_FIFO_STATUS),
};

+const struct regmap_access_table adxl312_readable_regs_table = {
+ .yes_ranges = adxl312_readable_reg_range,
+ .n_yes_ranges = ARRAY_SIZE(adxl312_readable_reg_range),
+};
+EXPORT_SYMBOL_NS_GPL(adxl312_readable_regs_table, IIO_ADXL312);
+
const struct regmap_access_table adxl313_readable_regs_table = {
.yes_ranges = adxl313_readable_reg_range,
.n_yes_ranges = ARRAY_SIZE(adxl313_readable_reg_range),
};
EXPORT_SYMBOL_NS_GPL(adxl313_readable_regs_table, IIO_ADXL313);

+const struct regmap_access_table adxl314_readable_regs_table = {
+ .yes_ranges = adxl312_readable_reg_range,
+ .n_yes_ranges = ARRAY_SIZE(adxl312_readable_reg_range),
+};
+EXPORT_SYMBOL_NS_GPL(adxl314_readable_regs_table, IIO_ADXL314);
+
+static const struct regmap_range adxl312_writable_reg_range[] = {
+ regmap_reg_range(ADXL313_REG_OFS_AXIS(0), ADXL313_REG_OFS_AXIS(2)),
+ regmap_reg_range(ADXL313_REG_THRESH_ACT, ADXL313_REG_ACT_INACT_CTL),
+ regmap_reg_range(ADXL313_REG_BW_RATE, ADXL313_REG_INT_MAP),
+ regmap_reg_range(ADXL313_REG_DATA_FORMAT, ADXL313_REG_DATA_FORMAT),
+ regmap_reg_range(ADXL313_REG_FIFO_CTL, ADXL313_REG_FIFO_CTL),
+};
+
static const struct regmap_range adxl313_writable_reg_range[] = {
regmap_reg_range(ADXL313_REG_SOFT_RESET, ADXL313_REG_SOFT_RESET),
regmap_reg_range(ADXL313_REG_OFS_AXIS(0), ADXL313_REG_OFS_AXIS(2)),
@@ -37,16 +65,30 @@ static const struct regmap_range adxl313_writable_reg_range[] = {
regmap_reg_range(ADXL313_REG_FIFO_CTL, ADXL313_REG_FIFO_CTL),
};

+const struct regmap_access_table adxl312_writable_regs_table = {
+ .yes_ranges = adxl312_writable_reg_range,
+ .n_yes_ranges = ARRAY_SIZE(adxl312_writable_reg_range),
+};
+EXPORT_SYMBOL_NS_GPL(adxl312_writable_regs_table, IIO_ADXL312);
+
const struct regmap_access_table adxl313_writable_regs_table = {
.yes_ranges = adxl313_writable_reg_range,
.n_yes_ranges = ARRAY_SIZE(adxl313_writable_reg_range),
};
EXPORT_SYMBOL_NS_GPL(adxl313_writable_regs_table, IIO_ADXL313);

+const struct regmap_access_table adxl314_writable_regs_table = {
+ .yes_ranges = adxl312_writable_reg_range,
+ .n_yes_ranges = ARRAY_SIZE(adxl312_writable_reg_range),
+};
+EXPORT_SYMBOL_NS_GPL(adxl314_writable_regs_table, IIO_ADXL314);
+
struct adxl313_data {
struct regmap *regmap;
+ const struct spi_device_id *id;
+ int scale_factor;
struct mutex lock; /* lock to protect transf_buf */
- __le16 transf_buf __aligned(IIO_DMA_MINALIGN);
+ __le16 transf_buf ____cacheline_aligned;
};

static const int adxl313_odr_freqs[][2] = {
@@ -156,12 +198,10 @@ static int adxl313_read_raw(struct iio_dev *indio_dev,
*val = sign_extend32(ret, chan->scan_type.realbits - 1);
return IIO_VAL_INT;
case IIO_CHAN_INFO_SCALE:
- /*
- * Scale for any g range is given in datasheet as
- * 1024 LSB/g = 0.0009765625 * 9.80665 = 0.009576806640625 m/s^2
- */
*val = 0;
- *val2 = 9576806;
+
+ *val2 = data->scale_factor;
+
return IIO_VAL_INT_PLUS_NANO;
case IIO_CHAN_INFO_CALIBBIAS:
ret = regmap_read(data->regmap,
@@ -170,7 +210,7 @@ static int adxl313_read_raw(struct iio_dev *indio_dev,
return ret;

/*
- * 8-bit resolution at +/- 0.5g, that is 4x accel data scale
+ * 8-bit resolution at minimum range, that is 4x accel data scale
* factor at full resolution
*/
*val = sign_extend32(regval, 7) * 4;
@@ -198,7 +238,7 @@ static int adxl313_write_raw(struct iio_dev *indio_dev,
switch (mask) {
case IIO_CHAN_INFO_CALIBBIAS:
/*
- * 8-bit resolution at +/- 0.5g, that is 4x accel data scale
+ * 8-bit resolution at minimum range, that is 4x accel data scale
* factor at full resolution
*/
if (clamp_val(val, -128 * 4, 127 * 4) != val)
@@ -223,14 +263,17 @@ static const struct iio_info adxl313_info = {
static int adxl313_setup(struct device *dev, struct adxl313_data *data,
int (*setup)(struct device *, struct regmap *))
{
+ enum adxl313_device_type dev_type = data->id->driver_data;
unsigned int regval;
int ret;

- /* Ensures the device is in a consistent state after start up */
- ret = regmap_write(data->regmap, ADXL313_REG_SOFT_RESET,
- ADXL313_SOFT_RESET);
- if (ret)
- return ret;
+ /* If ADXL313, ensures the device is in a consistent state after start up */
+ if (dev_type == ADXL313) {
+ ret = regmap_write(data->regmap, ADXL313_REG_SOFT_RESET,
+ ADXL313_SOFT_RESET);
+ if (ret)
+ return ret;
+ }

if (setup) {
ret = setup(dev, data->regmap);
@@ -242,41 +285,54 @@ static int adxl313_setup(struct device *dev, struct adxl313_data *data,
if (ret)
return ret;

- if (regval != ADXL313_DEVID0) {
+ if (dev_type == ADXL313 && regval != ADXL313_DEVID0) {
dev_err(dev, "Invalid manufacturer ID: 0x%02x\n", regval);
return -ENODEV;
}

- ret = regmap_read(data->regmap, ADXL313_REG_DEVID1, &regval);
- if (ret)
- return ret;
+ /* If ADXL313, check DEVID1 and PARTID */
+ if (regval == ADXL313_DEVID0) {
+ ret = regmap_read(data->regmap, ADXL313_REG_DEVID1, &regval);
+ if (ret)
+ return ret;

- if (regval != ADXL313_DEVID1) {
- dev_err(dev, "Invalid mems ID: 0x%02x\n", regval);
- return -ENODEV;
- }
+ if (regval != ADXL313_DEVID1) {
+ dev_err(dev, "Invalid mems ID: 0x%02x\n", regval);
+ return -ENODEV;
+ }

- ret = regmap_read(data->regmap, ADXL313_REG_PARTID, &regval);
- if (ret)
- return ret;
+ ret = regmap_read(data->regmap, ADXL313_REG_PARTID, &regval);
+ if (ret)
+ return ret;

- if (regval != ADXL313_PARTID) {
- dev_err(dev, "Invalid device ID: 0x%02x\n", regval);
+ if (regval != ADXL313_PARTID) {
+ dev_err(dev, "Invalid device ID: 0x%02x\n", regval);
+ return -ENODEV;
+ }
+ }
+
+ /* If ADXL312 or ADXL314 device, check DEVID0 */
+ if (dev_type != ADXL313 && regval != ADXL313_DEVID0_ADXL312_314) {
+ dev_err(dev, "Invalid manufacturer ID: %#02x\n", regval);
return -ENODEV;
}

- /* Sets the range to +/- 4g */
- ret = regmap_update_bits(data->regmap, ADXL313_REG_DATA_FORMAT,
- ADXL313_RANGE_MSK,
- FIELD_PREP(ADXL313_RANGE_MSK, ADXL313_RANGE_4G));
- if (ret)
- return ret;
+ dev_info(dev, "%s detected.\n", data->id->name);

- /* Enables full resolution */
- ret = regmap_update_bits(data->regmap, ADXL313_REG_DATA_FORMAT,
- ADXL313_FULL_RES, ADXL313_FULL_RES);
- if (ret)
- return ret;
+ /* Sets the range to maximum, full resolution, for ADXL312 and ADXL313 */
+ if (dev_type == ADXL312 || dev_type == ADXL313) {
+ ret = regmap_update_bits(data->regmap, ADXL313_REG_DATA_FORMAT,
+ ADXL313_RANGE_MSK,
+ FIELD_PREP(ADXL313_RANGE_MSK, 0x02));
+ if (ret)
+ return ret;
+
+ /* Enables full resolution */
+ ret = regmap_update_bits(data->regmap, ADXL313_REG_DATA_FORMAT,
+ ADXL313_FULL_RES, 0);
+ if (ret)
+ return ret;
+ }

/* Enables measurement mode */
return regmap_update_bits(data->regmap, ADXL313_REG_POWER_CTL,
@@ -296,7 +352,7 @@ static int adxl313_setup(struct device *dev, struct adxl313_data *data,
*/
int adxl313_core_probe(struct device *dev,
struct regmap *regmap,
- const char *name,
+ const struct spi_device_id *id,
int (*setup)(struct device *, struct regmap *))
{
struct adxl313_data *data;
@@ -309,9 +365,35 @@ int adxl313_core_probe(struct device *dev,

data = iio_priv(indio_dev);
data->regmap = regmap;
+ data->id = id;
+
+ if (id->driver_data == ADXL312)
+ /*
+ * ADXL312
+ * Scale for any g range (full range) is given in datasheet as
+ * 345 LSB/g = 0.0028985507 * 9.80665 = 0.028425072222155 m/s^2
+ */
+ data->scale_factor = 28425072;
+
+ if (id->driver_data == ADXL313)
+ /*
+ * * ADXL313
+ * Scale for any g range is given in datasheet as
+ * 1024 LSB/g = 0.0009765625 * 9.80665 = 0.009576806640625 m/s^2
+ */
+ data->scale_factor = 9576806;
+
+ if (id->driver_data == ADXL314)
+ /*
+ * ADXL314
+ * At +/-200g with 13-bit resolution, scale factor is given in datasheet as
+ * 48.83 mg/LSB = 0.0488300 * 9.80665 = 0.4788587195 m/s^2.
+ */
+ data->scale_factor = 478858719;
+
mutex_init(&data->lock);

- indio_dev->name = name;
+ indio_dev->name = id->name;
indio_dev->info = &adxl313_info;
indio_dev->modes = INDIO_DIRECT_MODE;
indio_dev->channels = adxl313_channels;
@@ -319,13 +401,13 @@ int adxl313_core_probe(struct device *dev,

ret = adxl313_setup(dev, data, setup);
if (ret) {
- dev_err(dev, "ADXL313 setup failed\n");
+ dev_err(dev, "Device %s setup failed\n", id->name);
return ret;
}

return devm_iio_device_register(dev, indio_dev);
}
-EXPORT_SYMBOL_NS_GPL(adxl313_core_probe, IIO_ADXL313);
+EXPORT_SYMBOL_GPL(adxl313_core_probe);

MODULE_AUTHOR("Lucas Stankus <lucas.p.stankus@xxxxxxxxx>");
MODULE_DESCRIPTION("ADXL313 3-Axis Digital Accelerometer core driver");
diff --git a/drivers/iio/accel/adxl313_spi.c b/drivers/iio/accel/adxl313_spi.c
index a3c6d553462d..19cd096373b0 100644
--- a/drivers/iio/accel/adxl313_spi.c
+++ b/drivers/iio/accel/adxl313_spi.c
@@ -14,6 +14,16 @@

#include "adxl313.h"

+static const struct regmap_config adxl312_spi_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .rd_table = &adxl312_readable_regs_table,
+ .wr_table = &adxl312_writable_regs_table,
+ .max_register = 0x39,
+ /* Setting bits 7 and 6 enables multiple-byte read */
+ .read_flag_mask = BIT(7) | BIT(6),
+};
+
static const struct regmap_config adxl313_spi_regmap_config = {
.reg_bits = 8,
.val_bits = 8,
@@ -24,6 +34,22 @@ static const struct regmap_config adxl313_spi_regmap_config = {
.read_flag_mask = BIT(7) | BIT(6),
};

+static const struct regmap_config adxl314_spi_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .rd_table = &adxl314_readable_regs_table,
+ .wr_table = &adxl314_writable_regs_table,
+ .max_register = 0x39,
+ /* Setting bits 7 and 6 enables multiple-byte read */
+ .read_flag_mask = BIT(7) | BIT(6),
+};
+
+static const struct regmap_config adxl31x_spi_regmap_config[] = {
+ adxl312_spi_regmap_config,
+ adxl313_spi_regmap_config,
+ adxl314_spi_regmap_config
+};
+
static int adxl313_spi_setup(struct device *dev, struct regmap *regmap)
{
struct spi_device *spi = container_of(dev, struct spi_device, dev);
@@ -51,26 +77,32 @@ static int adxl313_spi_probe(struct spi_device *spi)
if (ret)
return ret;

- regmap = devm_regmap_init_spi(spi, &adxl313_spi_regmap_config);
+ regmap = devm_regmap_init_spi(spi,
+ &adxl31x_spi_regmap_config[id->driver_data]);
+
if (IS_ERR(regmap)) {
dev_err(&spi->dev, "Error initializing spi regmap: %ld\n",
PTR_ERR(regmap));
return PTR_ERR(regmap);
}

- return adxl313_core_probe(&spi->dev, regmap, id->name,
+ return adxl313_core_probe(&spi->dev, regmap, id,
&adxl313_spi_setup);
}

static const struct spi_device_id adxl313_spi_id[] = {
- { "adxl313" },
+ { "adxl312", ADXL312 },
+ { "adxl313", ADXL313 },
+ { "adxl314", ADXL314 },
{ }
};

MODULE_DEVICE_TABLE(spi, adxl313_spi_id);

static const struct of_device_id adxl313_of_match[] = {
+ { .compatible = "adi,adxl312" },
{ .compatible = "adi,adxl313" },
+ { .compatible = "adi,adxl314" },
{ }
};

@@ -90,4 +122,6 @@ module_spi_driver(adxl313_spi_driver);
MODULE_AUTHOR("Lucas Stankus <lucas.p.stankus@xxxxxxxxx>");
MODULE_DESCRIPTION("ADXL313 3-Axis Digital Accelerometer SPI driver");
MODULE_LICENSE("GPL v2");
+MODULE_IMPORT_NS(IIO_ADXL312);
MODULE_IMPORT_NS(IIO_ADXL313);
+MODULE_IMPORT_NS(IIO_ADXL314);
--
2.30.2