[PATCH 14/16] hwmon: (mr75203) parse thermal coefficients from device-tree

From: Eliav Farber
Date: Tue Aug 16 2022 - 05:50:55 EST


Use thermal coefficients from the device tree if they exist.
Otherwise, use default values.

The equation used in the driver is:
T = G + H * (n / cal5 - 0.5) + J * F

With this change we can support also Mode 1 Conversion, which
uses A instead of G, and B instead of H.

We can also support the series 6 equation that has different
coefficients and has a slightly different format:
T = G + H * (n / cal5 - 0.5)
by setting J to 0.

Signed-off-by: Eliav Farber <farbere@xxxxxxxxxx>
---
drivers/hwmon/mr75203.c | 44 +++++++++++++++++++++++++++++++++++++----
1 file changed, 40 insertions(+), 4 deletions(-)

diff --git a/drivers/hwmon/mr75203.c b/drivers/hwmon/mr75203.c
index 59e2dc8fa333..79831a0d5dca 100644
--- a/drivers/hwmon/mr75203.c
+++ b/drivers/hwmon/mr75203.c
@@ -129,6 +129,10 @@ struct pvt_device {
u32 p_num;
u32 v_num;
u32 ip_freq;
+ u32 ts_coeff_h;
+ u32 ts_coeff_g;
+ s32 ts_coeff_j;
+ u32 ts_coeff_cal5;
u8 vm_ch_max;
u8 vm_ch_total;
};
@@ -177,10 +181,10 @@ static int pvt_read_temp(struct device *dev, u32 attr, int channel, long *val)
* Convert the register value to degrees centigrade temperature:
* T = G + H * (n / cal5 - 0.5) + J * F
*/
- *val = PVT_G_CONST;
- *val += PVT_H_CONST * nbs / PVT_CAL5_CONST;
- *val -= PVT_H_CONST / 2;
- *val += PVT_J_CONST * pvt->ip_freq / HZ_PER_MHZ;
+ *val = pvt->ts_coeff_g;
+ *val += pvt->ts_coeff_h * nbs / pvt->ts_coeff_cal5;
+ *val -= pvt->ts_coeff_h / 2;
+ *val += pvt->ts_coeff_j * pvt->ip_freq / HZ_PER_MHZ;

return 0;
default:
@@ -617,6 +621,38 @@ static int mr75203_probe(struct platform_device *pdev)
memset32(temp_config, HWMON_T_INPUT, ts_num);
pvt_temp.config = temp_config;
pvt_info[index++] = &pvt_temp;
+
+ /*
+ * Incase ts-coeff-h/g/j/cal5 property is not defined, use
+ * default value.
+ */
+ ret = of_property_read_u32(np, "ts-coeff-h", &pvt->ts_coeff_h);
+ if (ret)
+ pvt->ts_coeff_h = PVT_H_CONST;
+
+ ret = of_property_read_u32(np, "ts-coeff-g", &pvt->ts_coeff_g);
+ if (ret)
+ pvt->ts_coeff_g = PVT_G_CONST;
+
+ ret = of_property_read_s32(np, "ts-coeff-j", &pvt->ts_coeff_j);
+ if (ret)
+ pvt->ts_coeff_j = PVT_J_CONST;
+
+ ret = of_property_read_u32(np, "ts-coeff-cal5",
+ &pvt->ts_coeff_cal5);
+ if (ret) {
+ pvt->ts_coeff_cal5 = PVT_CAL5_CONST;
+ } else {
+ if (pvt->ts_coeff_cal5 == 0) {
+ dev_err(dev, "invalid ts-coeff-cal5 (%u)\n",
+ pvt->ts_coeff_cal5);
+ return -EINVAL;
+ }
+ }
+
+ dev_dbg(dev, "ts-coeff: h = %u, g = %u, j = %d, cal5 = %u\n",
+ pvt->ts_coeff_h, pvt->ts_coeff_g, pvt->ts_coeff_j,
+ pvt->ts_coeff_cal5);
}

if (pd_num) {
--
2.37.1