[PATCH 5.19 0256/1157] arm64: dts: qcom: sm6125: Move sdc2 pinctrl from seine-pdx201 to sm6125

From: Greg Kroah-Hartman
Date: Mon Aug 15 2022 - 18:58:56 EST


From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>

[ Upstream commit 6990640a93ba4e76dd62ca3ea1082a7354db09d7 ]

Both the sdc2-on and sdc2-off pinctrl nodes are used by the
sdhci@4784000 node in sm6125.dtsi. Surprisingly sdc2-off is defined in
sm6125, yet its sdc2-on counterpart is only defined in board-specific DT
for the Sony Seine PDX201 board/device resulting in an "undefined label
&sdc2_state_on" error if sm6125.dtsi were included elsewhere.
This sm6125 base dtsi should not rely on externally defined labels; the
properties referencing it should then also be written externally.
Since the sdc2-on pin configuration is board-independent just like
sdc2-off, move it from seine-pdx201.dts into sm6125.dtsi.

The SDCard-detect pin (gpio98) is however board-specific, and remains as
an overwrite in seine-pdx201.dts for both the on and off state.

As a drive-by cleanup, reorder bias- and drive-strength properties.

Fixes: cff4bbaf2a2d ("arm64: dts: qcom: Add support for SM6125")
Fixes: 82e1783890b7 ("arm64: dts: qcom: sm6125: Add support for Sony Xperia 10II")
Signed-off-by: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
Link: https://lore.kernel.org/r/20220508100336.127176-1-marijn.suijten@xxxxxxxxxxxxxx
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
.../qcom/sm6125-sony-xperia-seine-pdx201.dts | 34 +++++--------------
arch/arm64/boot/dts/qcom/sm6125.dtsi | 24 +++++++++++--
2 files changed, 30 insertions(+), 28 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts b/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts
index 871ccbba445b..4916e6c8b625 100644
--- a/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts
+++ b/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts
@@ -91,8 +91,16 @@ &hsusb_phy1 {
&sdc2_state_off {
sd-cd {
pins = "gpio98";
+ drive-strength = <2>;
bias-disable;
+ };
+};
+
+&sdc2_state_on {
+ sd-cd {
+ pins = "gpio98";
drive-strength = <2>;
+ bias-pull-up;
};
};

@@ -102,32 +110,6 @@ &sdhc_1 {

&tlmm {
gpio-reserved-ranges = <22 2>, <28 6>;
-
- sdc2_state_on: sdc2-on {
- clk {
- pins = "sdc2_clk";
- bias-disable;
- drive-strength = <16>;
- };
-
- cmd {
- pins = "sdc2_cmd";
- bias-pull-up;
- drive-strength = <10>;
- };
-
- data {
- pins = "sdc2_data";
- bias-pull-up;
- drive-strength = <10>;
- };
-
- sd-cd {
- pins = "gpio98";
- bias-pull-up;
- drive-strength = <2>;
- };
- };
};

&usb3 {
diff --git a/arch/arm64/boot/dts/qcom/sm6125.dtsi b/arch/arm64/boot/dts/qcom/sm6125.dtsi
index 135e6e0da27a..a0d8580739c5 100644
--- a/arch/arm64/boot/dts/qcom/sm6125.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6125.dtsi
@@ -389,20 +389,40 @@ tlmm: pinctrl@500000 {
sdc2_state_off: sdc2-off {
clk {
pins = "sdc2_clk";
- bias-disable;
drive-strength = <2>;
+ bias-disable;
};

cmd {
pins = "sdc2_cmd";
+ drive-strength = <2>;
bias-pull-up;
+ };
+
+ data {
+ pins = "sdc2_data";
drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ sdc2_state_on: sdc2-on {
+ clk {
+ pins = "sdc2_clk";
+ drive-strength = <16>;
+ bias-disable;
+ };
+
+ cmd {
+ pins = "sdc2_cmd";
+ drive-strength = <10>;
+ bias-pull-up;
};

data {
pins = "sdc2_data";
+ drive-strength = <10>;
bias-pull-up;
- drive-strength = <2>;
};
};
};
--
2.35.1