[tip: x86/microcode] x86/microcode/AMD: Attempt applying on every logical thread

From: tip-bot2 for Borislav Petkov
Date: Mon Aug 15 2022 - 18:28:21 EST


The following commit has been merged into the x86/microcode branch of tip:

Commit-ID: 71da8a554f25713964a919311c324e5a32f08239
Gitweb: https://git.kernel.org/tip/71da8a554f25713964a919311c324e5a32f08239
Author: Borislav Petkov <bp@xxxxxxx>
AuthorDate: Sun, 14 Aug 2022 12:37:49 +02:00
Committer: Borislav Petkov <bp@xxxxxxx>
CommitterDate: Mon, 15 Aug 2022 21:25:31 +02:00

x86/microcode/AMD: Attempt applying on every logical thread

Currently, the patch application logic checks whether patch application
is needed on each CPU. Therefore, on SMT designs where the microcode
engine is shared between the two threads, the application happens only
on one of them.

However, there are microcode patches which do per-thread modification,
see Link tag below.

Therefore, drop the revision check and try applying on each thread. This
is what the BIOS does too so this method is very much tested.

Reported-by: Ștefan Talpalaru <stefantalpalaru@xxxxxxxxx>
Tested-by: Ștefan Talpalaru <stefantalpalaru@xxxxxxxxx>
Signed-off-by: Borislav Petkov <bp@xxxxxxx>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216211
---
arch/x86/kernel/cpu/microcode/amd.c | 39 ++++++----------------------
1 file changed, 9 insertions(+), 30 deletions(-)

diff --git a/arch/x86/kernel/cpu/microcode/amd.c b/arch/x86/kernel/cpu/microcode/amd.c
index 8b2fcdf..a575dbb 100644
--- a/arch/x86/kernel/cpu/microcode/amd.c
+++ b/arch/x86/kernel/cpu/microcode/amd.c
@@ -420,8 +420,8 @@ apply_microcode_early_amd(u32 cpuid_1_eax, void *ucode, size_t size, bool save_p
struct cont_desc desc = { 0 };
u8 (*patch)[PATCH_MAX_SIZE];
struct microcode_amd *mc;
- u32 rev, dummy, *new_rev;
bool ret = false;
+ u32 *new_rev;

#ifdef CONFIG_X86_32
new_rev = (u32 *)__pa_nodebug(&ucode_new_rev);
@@ -439,10 +439,6 @@ apply_microcode_early_amd(u32 cpuid_1_eax, void *ucode, size_t size, bool save_p
if (!mc)
return ret;

- native_rdmsr(MSR_AMD64_PATCH_LEVEL, rev, dummy);
- if (rev >= mc->hdr.patch_id)
- return ret;
-
if (!__apply_microcode_amd(mc)) {
*new_rev = mc->hdr.patch_id;
ret = true;
@@ -516,7 +512,7 @@ void load_ucode_amd_ap(unsigned int cpuid_1_eax)
{
struct microcode_amd *mc;
struct cpio_data cp;
- u32 *new_rev, rev, dummy;
+ u32 *new_rev;

if (IS_ENABLED(CONFIG_X86_32)) {
mc = (struct microcode_amd *)__pa_nodebug(amd_ucode_patch);
@@ -526,10 +522,8 @@ void load_ucode_amd_ap(unsigned int cpuid_1_eax)
new_rev = &ucode_new_rev;
}

- native_rdmsr(MSR_AMD64_PATCH_LEVEL, rev, dummy);
-
/* Check whether we have saved a new patch already: */
- if (*new_rev && rev < mc->hdr.patch_id) {
+ if (*new_rev) {
if (!__apply_microcode_amd(mc)) {
*new_rev = mc->hdr.patch_id;
return;
@@ -571,23 +565,17 @@ int __init save_microcode_in_initrd_amd(unsigned int cpuid_1_eax)

void reload_ucode_amd(void)
{
- struct microcode_amd *mc;
- u32 rev, dummy __always_unused;
-
- mc = (struct microcode_amd *)amd_ucode_patch;
+ struct microcode_amd *mc = (struct microcode_amd *)amd_ucode_patch;

- rdmsr(MSR_AMD64_PATCH_LEVEL, rev, dummy);
-
- if (rev < mc->hdr.patch_id) {
- if (!__apply_microcode_amd(mc)) {
- ucode_new_rev = mc->hdr.patch_id;
- pr_info("reload patch_level=0x%08x\n", ucode_new_rev);
- }
+ if (!__apply_microcode_amd(mc)) {
+ ucode_new_rev = mc->hdr.patch_id;
+ pr_info("reload patch_level=0x%08x\n", ucode_new_rev);
}
}
static u16 __find_equiv_id(unsigned int cpu)
{
struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
+
return find_equiv_id(&equiv_table, uci->cpu_sig.sig);
}

@@ -678,7 +666,7 @@ static enum ucode_state apply_microcode_amd(int cpu)
struct ucode_cpu_info *uci;
struct ucode_patch *p;
enum ucode_state ret;
- u32 rev, dummy __always_unused;
+ u32 rev;

BUG_ON(raw_smp_processor_id() != cpu);

@@ -691,14 +679,6 @@ static enum ucode_state apply_microcode_amd(int cpu)
mc_amd = p->data;
uci->mc = p->data;

- rdmsr(MSR_AMD64_PATCH_LEVEL, rev, dummy);
-
- /* need to apply patch? */
- if (rev >= mc_amd->hdr.patch_id) {
- ret = UCODE_OK;
- goto out;
- }
-
if (__apply_microcode_amd(mc_amd)) {
pr_err("CPU%d: update failed for patch_level=0x%08x\n",
cpu, mc_amd->hdr.patch_id);
@@ -710,7 +690,6 @@ static enum ucode_state apply_microcode_amd(int cpu)

pr_info("CPU%d: new patch_level=0x%08x\n", cpu, rev);

-out:
uci->cpu_sig.rev = rev;
c->microcode = rev;