Re: [PATCH net 1/2] dt: ar803x: Document disable-hibernation property

[Andrew Lunn]

On Sat, Aug 13, 2022 at 12:50:08AM +1000, wei.fang@xxxxxxx wrote:
> From: Wei Fang <wei.fang@xxxxxxx>
> 
> The hibernation mode of Atheros AR803x PHYs is default enabled.
> When the cable is unplugged, the PHY will enter hibernation
> mode and the PHY clock does down. For some MACs, it needs the
> clock to support it's logic. For instance, stmmac needs the PHY
> inputs clock is present for software reset completion. Therefore,
> It is reasonable to add a DT property to disable hibernation mode.
> 
> Signed-off-by: Wei Fang <wei.fang@xxxxxxx>
> ---
>  Documentation/devicetree/bindings/net/qca,ar803x.yaml | 6 ++++++
>  1 file changed, 6 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/net/qca,ar803x.yaml b/Documentation/devicetree/bindings/net/qca,ar803x.yaml
> index b3d4013b7ca6..d08431d79b83 100644
> --- a/Documentation/devicetree/bindings/net/qca,ar803x.yaml
> +++ b/Documentation/devicetree/bindings/net/qca,ar803x.yaml
> @@ -40,6 +40,12 @@ properties:
>        Only supported on the AR8031.
>      type: boolean
>  
> +  qca,disable-hibernation:
> +    description: |
> +    If set, the PHY will not enter hibernation mode when the cable is
> +    unplugged.
> +    type: boolean

The description itself needs indenting 2 space.

I would suggest you do what the bot suggests and install the dtschema
tools.

	Andrew