[PATCH v6 02/14] perf test: Add CoreSight shell lib shared code for future tests

From: carsten . haitzler
Date: Fri Aug 12 2022 - 07:42:49 EST


From: "Carsten Haitzler (Rasterman)" <raster@xxxxxxxxxxxxx>

This adds a library of shell "code" to be shared and used by future
tests that target quality testing for Arm CoreSight support in perf
and the Linux kernel.

Signed-off-by: Carsten Haitzler <carsten.haitzler@xxxxxxx>
---
tools/perf/tests/shell/lib/coresight.sh | 132 ++++++++++++++++++++++++
1 file changed, 132 insertions(+)
create mode 100644 tools/perf/tests/shell/lib/coresight.sh

diff --git a/tools/perf/tests/shell/lib/coresight.sh b/tools/perf/tests/shell/lib/coresight.sh
new file mode 100644
index 000000000000..45a1477256b6
--- /dev/null
+++ b/tools/perf/tests/shell/lib/coresight.sh
@@ -0,0 +1,132 @@
+# SPDX-License-Identifier: GPL-2.0
+# Carsten Haitzler <carsten.haitzler@xxxxxxx>, 2021
+
+# This is sourced from a driver script so no need for #!/bin... etc. at the
+# top - the assumption below is that it runs as part of sourcing after the
+# test sets up some basic env vars to say what it is.
+
+# This currently works with ETMv4 / ETF not any other packet types at thi
+# point. This will need changes if that changes.
+
+# perf record options for the perf tests to use
+PERFRECMEM="-m ,16M"
+PERFRECOPT="$PERFRECMEM -e cs_etm//u"
+
+TOOLS=$(dirname $0)
+DIR="$TOOLS/$TEST"
+BIN="$DIR/$TEST"
+# If the test tool/binary does not exist and is executable then skip the test
+if ! test -x "$BIN"; then exit 2; fi
+DATD="."
+# If the data dir env is set then make the data dir use that instead of ./
+if test -n "$PERF_TEST_CORESIGHT_DATADIR"; then
+ DATD="$PERF_TEST_CORESIGHT_DATADIR";
+fi
+# If the stat dir env is set then make the data dir use that instead of ./
+STATD="."
+if test -n "$PERF_TEST_CORESIGHT_STATDIR"; then
+ STATD="$PERF_TEST_CORESIGHT_STATDIR";
+fi
+
+# Called if the test fails - error code 1
+err() {
+ echo "$1"
+ exit 1
+}
+
+# Check that some statistics from our perf
+check_val_min() {
+ STATF="$4"
+ if test "$2" -lt "$3"; then
+ echo ", FAILED" >> "$STATF"
+ err "Sanity check number of $1 is too low ($2 < $3)"
+ fi
+}
+
+perf_dump_aux_verify() {
+ # Some basic checking that the AUX chunk contains some sensible data
+ # to see that we are recording something and at least a minimum
+ # amount of it. We should almost always see Fn packets in just about
+ # anything but certainly we will see some trace info and async
+ # packets
+ DUMP="$DATD/perf-tmp-aux-dump.txt"
+ perf report --stdio --dump -i "$1" | \
+ grep -o -e I_ATOM_F -e I_ASYNC -e I_TRACE_INFO > "$DUMP"
+ # Simply count how many of these packets we find to see that we are
+ # producing a reasonable amount of data - exact checks are not sane
+ # as this is a lossy process where we may lose some blocks and the
+ # compiler may produce different code depending on the compiler and
+ # optimization options, so this is rough just to see if we're
+ # either missing almost all the data or all of it
+ ATOM_FX_NUM=`grep I_ATOM_F "$DUMP" | wc -l`
+ ASYNC_NUM=`grep I_ASYNC "$DUMP" | wc -l`
+ TRACE_INFO_NUM=`grep I_TRACE_INFO "$DUMP" | wc -l`
+ rm -f "$DUMP"
+
+ # Arguments provide minimums for a pass
+ CHECK_FX_MIN="$2"
+ CHECK_ASYNC_MIN="$3"
+ CHECK_TRACE_INFO_MIN="$4"
+
+ # Write out statistics, so over time you can track results to see if
+ # there is a pattern - for example we have less "noisy" results that
+ # produce more consistent amounts of data each run, to see if over
+ # time any techinques to minimize data loss are having an effect or
+ # not
+ STATF="$STATD/stats-$TEST-$DATV.csv"
+ if ! test -f "$STATF"; then
+ echo "ATOM Fx Count, Minimum, ASYNC Count, Minimum, TRACE INFO Count, Minimum" > "$STATF"
+ fi
+ echo -n "$ATOM_FX_NUM, $CHECK_FX_MIN, $ASYNC_NUM, $CHECK_ASYNC_MIN, $TRACE_INFO_NUM, $CHECK_TRACE_INFO_MIN" >> "$STATF"
+
+ # Actually check to see if we passed or failed.
+ check_val_min "ATOM_FX" "$ATOM_FX_NUM" "$CHECK_FX_MIN" "$STATF"
+ check_val_min "ASYNC" "$ASYNC_NUM" "$CHECK_ASYNC_MIN" "$STATF"
+ check_val_min "TRACE_INFO" "$TRACE_INFO_NUM" "$CHECK_TRACE_INFO_MIN" "$STATF"
+ echo ", Ok" >> "$STATF"
+}
+
+perf_dump_aux_tid_verify() {
+ # Specifically crafted test will produce a list of Tread ID's to
+ # stdout that need to be checked to see that they have had trace
+ # info collected in AUX blocks in the perf data. This will go
+ # through all the TID's that are listed as CID=0xabcdef and see
+ # that all the Thread IDs the test tool reports are in the perf
+ # data AUX chunks
+
+ # The TID test tools will print a TID per stdout line that are being
+ # tested
+ TIDS=`cat "$2"`
+ # Scan the perf report to find the TIDs that are actually CID in hex
+ # and build a list of the ones found
+ FOUND_TIDS=`perf report --stdio --dump -i "$1" | \
+ grep -o "CID=0x[0-9a-z]\+" | sed 's/CID=//g' | \
+ uniq | sort | uniq`
+ # No CID=xxx found - maybe your kernel is reporting these as
+ # VMID=xxx so look there
+ if test -z "$FOUND_TIDS"; then
+ FOUND_TIDS=`perf report --stdio --dump -i "$1" | \
+ grep -o "VMID=0x[0-9a-z]\+" | sed 's/VMID=//g' | \
+ uniq | sort | uniq`
+ fi
+
+ # Iterate over the list of TIDs that the test says it has and find
+ # them in the TIDs found in the perf report
+ MISSING=""
+ for TID2 in $TIDS; do
+ FOUND=""
+ for TIDHEX in $FOUND_TIDS; do
+ TID=`printf "%i" $TIDHEX`
+ if test "$TID" -eq "$TID2"; then
+ FOUND="y"
+ break
+ fi
+ done
+ if test -z "$FOUND"; then
+ MISSING="$MISSING $TID"
+ fi
+ done
+ if test -n "$MISSING"; then
+ err "Thread IDs $MISSING not found in perf AUX data"
+ fi
+}
--
2.32.0