[PATCH v2] arm64: dts: verdin-imx8mm: add otg2 pd to usbphy

From: Philippe Schenker
Date: Thu Aug 11 2022 - 10:08:17 EST


From: Philippe Schenker <philippe.schenker@xxxxxxxxxxx>

The Verdin iMX8M Mini System on Module does not have USB-ID signal
connected on Verdin USB_2 (usbotg2). On Verdin Development board this is
no problem, as we have connected a USB-Hub that is always connected.

However, if Verdin USB_2 is desired to be used as a single USB-Host port
the chipidea driver does not detect if a USB device is plugged into this
port, due to runtime pm shutting down the PHY.

Add the power-domain &pgc_otg2 to &usbphynop2 in order to detect
plugging events and enumerate the usb device.

Fixes: 6a57f224f734 ("arm64: dts: freescale: add initial support for verdin imx8m mini")
Signed-off-by: Philippe Schenker <philippe.schenker@xxxxxxxxxxx>

---

Changes in v2:
- Changed word VBUS to USB-ID, as from mailinglist discussions I
obviously mixed that up before.

arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi | 1 +
1 file changed, 1 insertion(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi
index d1b4582f44c4..34808aa36c2b 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi
@@ -745,6 +745,7 @@ &usbphynop1 {
};

&usbphynop2 {
+ power-domains = <&pgc_otg2>;
vcc-supply = <&reg_vdd_3v3>;
};

--
2.37.1