[PATCH V3] HID: HID-rmi - ignore to rmi_hid_read_block after system resumes.

[margeyang]

From: Marge Yang <marge.yang@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>

The interrupt GPIO will be pulled down once
after RMI driver reads this command(Report ID:0x0A).
It will cause "Dark resume test fail" for chromebook device.
Hence, TP driver will ignore rmi_hid_read_block function once
after system resumes.

Signed-off-by: Marge Yang<marge.yang@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>
---
 drivers/hid/hid-rmi.c | 14 ++++++++++++--
 include/linux/rmi.h   |  2 ++
 2 files changed, 14 insertions(+), 2 deletions(-)

diff --git a/drivers/hid/hid-rmi.c b/drivers/hid/hid-rmi.c
index 311eee599ce9..fdaf2c4ce181 100644
--- a/drivers/hid/hid-rmi.c
+++ b/drivers/hid/hid-rmi.c
@@ -203,7 +203,13 @@ static int rmi_hid_read_block(struct rmi_transport_dev *xport, u16 addr,
 		if (ret < 0)
 			goto exit;
 	}
-
+	if (xport->ignoreonce == 1) {
+		dev_err(&hdev->dev,
+			"ignoreonce (%d)\n",
+			xport->ignoreonce);
+		xport->ignoreonce = 0;
+		goto exit;
+	}
 	for (retries = 5; retries > 0; retries--) {
 		data->writeReport[0] = RMI_READ_ADDR_REPORT_ID;
 		data->writeReport[1] = 0; /* old 1 byte read count */
@@ -468,8 +474,12 @@ static int rmi_post_resume(struct hid_device *hdev)
 	ret = hid_hw_open(hdev);
 	if (ret)
 		return ret;
-
+	// Avoid to read rmi_hid_read_block once after system resumes.
+	// The interrupt will be pulled down
+	// after RMI Read command(Report ID:0x0A).
+	data->xport.ignoreonce = 1;
 	ret = rmi_reset_attn_mode(hdev);
+	data->xport.ignoreonce = 0;
 	if (ret)
 		goto out;
 
diff --git a/include/linux/rmi.h b/include/linux/rmi.h
index ab7eea01ab42..24f63ad00970 100644
--- a/include/linux/rmi.h
+++ b/include/linux/rmi.h
@@ -270,6 +270,8 @@ struct rmi_transport_dev {
 	struct rmi_device_platform_data pdata;
 
 	struct input_dev *input;
+
+	int ignoreonce;
 };
 
 /**
-- 
2.22.0.windows.1