[PATCH v4 1/3] dt-binding: mfd: Add Richtek RT5120 PMIC support

From: cy_huang
Date: Tue Aug 09 2022 - 22:56:10 EST


From: ChiYuan Huang <cy_huang@xxxxxxxxxxx>

Add Richtek RT5120 PMIC devicetree document.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
Signed-off-by: ChiYuan Huang <cy_huang@xxxxxxxxxxx>
---
Since v2:
- Add 'unevaluatedProperties: false' for regulator buck1~4/ldo/exten.
- Fix indention and remove status for powerkey.
- Refine powerkey description for more HW details.

---
.../devicetree/bindings/mfd/richtek,rt5120.yaml | 178 +++++++++++++++++++++
1 file changed, 178 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mfd/richtek,rt5120.yaml

diff --git a/Documentation/devicetree/bindings/mfd/richtek,rt5120.yaml b/Documentation/devicetree/bindings/mfd/richtek,rt5120.yaml
new file mode 100644
index 00000000..f73b8b2
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/richtek,rt5120.yaml
@@ -0,0 +1,178 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/richtek,rt5120.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Richtek RT5120 PMIC
+
+maintainers:
+ - ChiYuan Huang <cy_huang@xxxxxxxxxxx>
+
+description: |
+ The RT5120 provides four high-efficiency buck converters and one LDO voltage
+ regulator. The device is targeted at providingthe processor voltage, memory,
+ I/O, and peripheral rails in home entertainment devices. The I2C interface is
+ used for dynamic voltage scaling of the processor voltage, power rails on/off
+ sequence control, operation mode selection.
+
+properties:
+ compatible:
+ enum:
+ - richtek,rt5120
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ interrupt-controller: true
+
+ "#interrupt-cells":
+ const: 1
+
+ wakeup-source: true
+
+ richtek,enable-undervolt-hiccup:
+ type: boolean
+ description: |
+ If used, under voltage protection trigger hiccup behavior, else latchup as
+ default
+
+ richtek,enable-overvolt-hiccup:
+ type: boolean
+ description:
+ Like as 'enable-uv-hiccup', it configures over voltage protection to
+ hiccup, else latchup as default
+
+ vin1-supply:
+ description: phandle for buck1 input power source
+
+ vin2-supply:
+ description: phandle for buck2 input power source
+
+ vin3-supply:
+ description: phandle for buck3 input power source
+
+ vin4-supply:
+ description: phandle for buck4 input power source
+
+ vinldo-supply:
+ description: phandle for ldo input power source
+
+ regulators:
+ type: object
+
+ patternProperties:
+ "^buck[1-4]$":
+ type: object
+ $ref: /schemas/regulator/regulator.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ regulator-allowed-modes:
+ description: |
+ Used to specify the allowed buck converter operating mode
+ mode mapping:
+ 0: auto mode
+ 1: force pwm mode
+ items:
+ enum: [0, 1]
+
+ "^(ldo|exten)$":
+ type: object
+ $ref: /schemas/regulator/regulator.yaml#
+ unevaluatedProperties: false
+
+ additionalProperties: false
+
+ powerkey:
+ type: object
+ description:
+ PON key that connected to RT5120 PMIC.
+
+ properties:
+ compatible:
+ enum:
+ - richtek,rt5120-pwrkey
+
+ required:
+ - compatible
+
+ additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - '#interrupt-cells'
+ - interrupt-controller
+ - regulators
+ - powerkey
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pmic@62 {
+ compatible = "richtek,rt5120";
+ reg = <0x62>;
+ interrupts-extended = <&gpio_intc 32 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ wakeup-source;
+
+ regulators {
+ buck1 {
+ regulator-name = "rt5120-buck1";
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <1393750>;
+ regulator-allowed-modes = <0 1>;
+ regulator-boot-on;
+ };
+ buck2 {
+ regulator-name = "rt5120-buck2";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-allowed-modes = <0 1>;
+ regulator-always-on;
+ };
+ buck3 {
+ regulator-name = "rt5120-buck3";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-allowed-modes = <0 1>;
+ regulator-always-on;
+ };
+ buck4 {
+ regulator-name = "rt5120-buck4";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-allowed-modes = <0 1>;
+ regulator-always-on;
+ };
+ ldo {
+ regulator-name = "rt5120-ldo";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+ exten {
+ regulator-name = "rt5120-exten";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ };
+ };
+ powerkey {
+ compatible = "richtek,rt5120-pwrkey";
+ };
+ };
+ };
--
2.7.4