[PATCH v2 20/26] thermal/drivers/broadcom: Use generic thermal_zone_get_trip() function

From: Daniel Lezcano
Date: Tue Aug 09 2022 - 18:07:40 EST


The thermal framework gives the possibility to register the trip
points with the thermal zone. When that is done, no get_trip_* ops are
needed and they can be removed.

Convert ops content logic into generic trip points and register them with the
thermal zone.

Signed-off-by: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
---
drivers/thermal/broadcom/bcm2835_thermal.c | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/drivers/thermal/broadcom/bcm2835_thermal.c b/drivers/thermal/broadcom/bcm2835_thermal.c
index 2c67841a1115..5485e59d03a9 100644
--- a/drivers/thermal/broadcom/bcm2835_thermal.c
+++ b/drivers/thermal/broadcom/bcm2835_thermal.c
@@ -18,6 +18,7 @@
#include <linux/platform_device.h>
#include <linux/thermal.h>

+#include "../thermal_core.h"
#include "../thermal_hwmon.h"

#define BCM2835_TS_TSENSCTL 0x00
@@ -224,7 +225,8 @@ static int bcm2835_thermal_probe(struct platform_device *pdev)
*/
val = readl(data->regs + BCM2835_TS_TSENSCTL);
if (!(val & BCM2835_TS_TSENSCTL_RSTB)) {
- int trip_temp, offset, slope;
+ struct thermal_trip trip;
+ int offset, slope;

slope = thermal_zone_get_slope(tz);
offset = thermal_zone_get_offset(tz);
@@ -232,7 +234,7 @@ static int bcm2835_thermal_probe(struct platform_device *pdev)
* For now we deal only with critical, otherwise
* would need to iterate
*/
- err = tz->ops->get_trip_temp(tz, 0, &trip_temp);
+ err = thermal_zone_get_trip(tz, 0, &trip);
if (err < 0) {
dev_err(&pdev->dev,
"Not able to read trip_temp: %d\n",
@@ -249,7 +251,7 @@ static int bcm2835_thermal_probe(struct platform_device *pdev)
val |= (0xFE << BCM2835_TS_TSENSCTL_RSTDELAY_SHIFT);

/* trip_adc value from info */
- val |= bcm2835_thermal_temp2adc(trip_temp,
+ val |= bcm2835_thermal_temp2adc(trip.temperature,
offset,
slope)
<< BCM2835_TS_TSENSCTL_THOLD_SHIFT;
--
2.34.1