Re: [PATCH] mmc: sdhci-xenon: Fix 2G limitation on AC5 SoC

From: Adrian Hunter
Date: Mon Aug 08 2022 - 08:59:00 EST

Next message: Chengming Zhou: "[PATCH v4 7/9] sched/fair: allow changing cgroup of new forked task"
Previous message: Chengming Zhou: "[PATCH v4 6/9] sched/fair: fix another detach on unattached task corner case"
In reply to: Vadym Kochan: "Re: [PATCH] mmc: sdhci-xenon: Fix 2G limitation on AC5 SoC"
Next in thread: Robin Murphy: "Re: [PATCH] mmc: sdhci-xenon: Fix 2G limitation on AC5 SoC"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On 8/08/22 15:26, Vadym Kochan wrote:
> On Mon, Aug 08, 2022 at 02:40:07PM +0300, Adrian Hunter wrote:
>> On 8/08/22 12:52, Vadym Kochan wrote:
>>> Hi Adrian,
>>>
>>> On Mon, Aug 08, 2022 at 12:19:10PM +0300, Adrian Hunter wrote:
>>>> On 1/08/22 12:30, Vadym Kochan wrote:
>>>>> Hi Florian,
>>>>>
>>>>> On Wed, Jul 27, 2022 at 07:45:32PM +0300, Vadym Kochan wrote:
>>>>>> Hi Florian,
>>>>>>
>>>>>> On Tue, Jul 26, 2022 at 10:37:46AM -0700, Florian Fainelli wrote:
>>>>>>> On 7/26/22 10:07, Vadym Kochan wrote:
>>>>>>>> From: Elad Nachman <enachman@xxxxxxxxxxx>
>>>>>>>>
>>>>>>>> There is a limitation on AC5 SoC that mmc controller
>>>>>>>> can't have DMA access over 2G memory.
>>>>>>>>
>>>>>>>> Signed-off-by: Elad Nachman <enachman@xxxxxxxxxxx>
>>>>>>>> Signed-off-by: Vadym Kochan <vadym.kochan@xxxxxxxxxxx>
>>>>>>>> ---
>>>>>>>> drivers/mmc/host/sdhci-xenon.c | 13 +++++++++++++
>>>>>>>> 1 file changed, 13 insertions(+)
>>>>>>>>
>>>>>>>> diff --git a/drivers/mmc/host/sdhci-xenon.c b/drivers/mmc/host/sdhci-xenon.c
>>>>>>>> index 08e838400b52..666d06b58564 100644
>>>>>>>> --- a/drivers/mmc/host/sdhci-xenon.c
>>>>>>>> +++ b/drivers/mmc/host/sdhci-xenon.c
>>>>>>>> @@ -18,6 +18,7 @@
>>>>>>>> #include <linux/of.h>
>>>>>>>> #include <linux/pm.h>
>>>>>>>> #include <linux/pm_runtime.h>
>>>>>>>> +#include <linux/mm.h>
>>>>>>>>
>>>>>>>> #include "sdhci-pltfm.h"
>>>>>>>> #include "sdhci-xenon.h"
>>>>>>>> @@ -422,6 +423,8 @@ static int xenon_probe_params(struct platform_device *pdev)
>>>>>>>> struct xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
>>>>>>>> u32 sdhc_id, nr_sdhc;
>>>>>>>> u32 tuning_count;
>>>>>>>> + struct device_node *np = pdev->dev.of_node;
>>>>>>>> + struct sysinfo si;
>>>>>>>>
>>>>>>>> /* Disable HS200 on Armada AP806 */
>>>>>>>> if (priv->hw_version == XENON_AP806)
>>>>>>>> @@ -450,6 +453,15 @@ static int xenon_probe_params(struct platform_device *pdev)
>>>>>>>> }
>>>>>>>> priv->tuning_count = tuning_count;
>>>>>>>>
>>>>>>>> + si_meminfo(&si);
>>>>>>>> +
>>>>>>>> + if (of_device_is_compatible(np, "marvell,ac5-sdhci") &&
>>>>>>>> + ((si.totalram * si.mem_unit) > 0x80000000 /*2G*/)) {
>>>>>>>
>>>>>>> Why not limit the DMA mask of the device and ensure, that bounce buffers get used so you can still do DMA?
>>>>>>>
>>>>>>> Also, you ought to be able to describe that limitation using Device Tree (assuming this is an option) and declaring a dedicated bus node for the SDHCI controller and providing a suitable dma-ranges property, see: arch/arm/boot/dts/bcm2711.dtsi and the 'soc' node for such examples.
>>>>>>>
>>>>>>>
>>>>>>
>>>>>
>>>>> I could use DMA only in 2 ways:
>>>>>
>>>>> #1 Use sdhci bounce buffer with SDMA mode
>>>>>
>>>>> But there was the issue that SDMA requires that SDHCI v4 mode should
>>>>> be enabled, and when I enable it via sdhci_enable_v4_mode(host)
>>>>> then I got error that EXT_CSD can't be recognized.
>>>>>
>>>>> But if I comment this line in sdhci.c:
>>>>>
>>>>> int sdhci_setup_host(struct sdhci_host *host)
>>>>> {
>>>>> ...
>>>>>
>>>>> /* SDMA does not support 64-bit DMA if v4 mode not set */
>>>>> if ((host->flags & SDHCI_USE_64_BIT_DMA) && !host->v4_mode) {
>>>>> pr_info("XXX SDMA does not support 64-bit DMA if v4 mode not set\n");
>>>>> host->flags &= ~SDHCI_USE_SDMA;
>>>>> }
>>>>>
>>>>> ...
>>>>> }
>>>>>
>>>>> then everything is OK.
>>>>>
>>>>> #2 Use restricted-dma-pool in device-tree
>>>>>
>>>>> But I am not sure if it is good solution compared to #1.
>>>>>
>>>>> Setting only DMA mask did not help because after some time I got
>>>>> "DMA overflow address" error stack-traces.
>>>>
>>>> AFAICT using a DMA mask is the correct way to solve this. If that
>>>> reveals another issue then that must be resolved also. Can you show
>>>> the stack traces and what kernel they are from?
>>>>
>>>
>>> The Linux version is next-20220808
>>>
>>> Here is a stacktrace:
>>>
>>> [ 40.537028] ------------[ cut here ]------------
>>> [ 40.541698] xenon-sdhci 805c0000.sdhci: DMA addr
>>> 0x00000002ff700000+40960 overflow (mask 27fffffff, bus limit 0).
>>> [ 40.551968] WARNING: CPU: 0 PID: 7 at kernel/dma/direct.h:103
>>> dma_direct_map_sg+0x28c/0x2b0
>>
>> Do you have CONFIG_SWIOTLB=y?
>>
>
> Yes. Additionally I pass "swiotlb=force", because as I understand it is
> not enabled by default at least on arm64.
>
>> Is DMA mask correct? 2G mask would be 7fffffff not 27fffffff right?
>>
>
> The RAM starts at 0x2_00000000 so thats why I use this mask.
>
> Event if to use forced swiotlb via command-line then swiotlb complains
> about the mask (from what I checked is that because swiotlb will be
> allocated at the top of the DMA memory, which is actually the end of
> RAM. Ofcourse if to manually hard-code arm64_dma_phys_limit in
> arch/arm64/mm/init.c then everything works ok and I see that swiotlb
> does the job if to check via debugfs):

It sounds like maybe SWIOTLB does not support your memory model?
Adding SWIOTLB people.

>
> [ 1.129987] ------------[ cut here ]------------
> [ 1.134595] xenon-sdhci 805c0000.sdhci: swiotlb addr 0x00000002f7000000+512 overflow (mask 27fffffff, bus limit 0).
> [ 1.142086] usb 1-1: new high-speed USB device number 2 using orion-ehci
> [ 1.145025] WARNING: CPU: 0 PID: 24 at kernel/dma/swiotlb.c:880 swiotlb_map+0x1b4/0x1f0
> [ 1.159679] Modules linked in:
> [ 1.162733] CPU: 0 PID: 24 Comm: kworker/0:1 Not tainted
> 5.19.0-next-20220808 #46
> [ 1.170202] Hardware name: Marvell A0-AC5X Board (DT)
> [ 1.175243] Workqueue: events_freezable mmc_rescan
> [ 1.180033] pstate: 604000c9 (nZCv daIF +PAN -UAO -TCO -DIT -SSBS
> BTYPE=--)
> [ 1.186982] pc : swiotlb_map+0x1b4/0x1f0
> [ 1.190898] lr : swiotlb_map+0x1b4/0x1f0
> [ 1.194813] sp : ffff80000a8eb840
> [ 1.198119] x29: ffff80000a8eb840 x28: ffff80000a8ebb38 x27:
> 0000000000000000
> [ 1.205245] x26: 0000000000000000 x25: ffff0000004de810 x24:
> 0000000000000000
> [ 1.212369] x23: 0000000000000002 x22: 0000000000000002 x21:
> 0000000000000000
> [ 1.219494] x20: 0000000000000200 x19: ffff0000004de810 x18:
> ffffffffffffffff
> [ 1.226619] x17: 203231352b303030 x16: 3030303766323030 x15:
> 3030303030783020
> [ 1.233744] x14: 7264646120626c74 x13: 2e29302074696d69 x12:
> 6c20737562202c66
> [ 1.240869] x11: 6666666666663732 x10: 206b73616d282077 x9 :
> 6f697773203a6963
> [ 1.247994] x8 : 6864732e30303030 x7 : 205d353935343331 x6 :
> ffff80000a665000
> [ 1.255118] x5 : 0000000000000000 x4 : 0000000000000000 x3 :
> 00000000ffffffff
> [ 1.262243] x2 : 0000000000000000 x1 : 0000000000000000 x0 :
> ffff0000005a0000
> [ 1.269369] Call trace:
> [ 1.271810] swiotlb_map+0x1b4/0x1f0
> [ 1.275380] dma_direct_map_sg+0x94/0x2b0
> [ 1.279382] __dma_map_sg_attrs+0x28/0xa0
> [ 1.283388] dma_map_sg_attrs+0x10/0x30
> [ 1.287219] sdhci_pre_dma_transfer+0xcc/0x150
> [ 1.291658] sdhci_send_command+0x644/0xea0
> [ 1.295834] sdhci_send_command_retry+0x40/0x140
> [ 1.300443] sdhci_request+0x70/0xd0
> [ 1.304012] __mmc_start_request+0x68/0x140
> [ 1.308188] mmc_start_request+0x78/0xa0
> [ 1.312103] mmc_wait_for_req+0x70/0x100
> [ 1.316020] mmc_send_adtc_data+0xd8/0x130
> [ 1.320109] mmc_get_ext_csd+0x70/0xe0
> [ 1.323850] mmc_init_card+0x7e8/0x1ad0
> [ 1.327680] mmc_attach_mmc+0xdc/0x180
> [ 1.331422] mmc_rescan+0x280/0x2f0
> [ 1.334905] process_one_work+0x1d0/0x320
> [ 1.338912] worker_thread+0x14c/0x450
> [ 1.342655] kthread+0x10c/0x110
> [ 1.345879] ret_from_fork+0x10/0x20
> [ 1.349450] ---[ end trace 0000000000000000 ]---
> [ 1.354091] ------------[ cut here ]------------
>
>
>>> [ 40.560321] Modules linked in: uio_pdrv_genirq
>>> [ 40.564766] CPU: 0 PID: 7 Comm: kworker/0:0H Not tainted
>>> 5.19.0-next-20220808 #20
>>> [ 40.572236] Hardware name: Marvell A0-AC5X Board (DT)
>>> [ 40.577278] Workqueue: kblockd blk_mq_run_work_fn
>>> [ 40.581980] pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS
>>> BTYPE=--)
>>> [ 40.588929] pc : dma_direct_map_sg+0x28c/0x2b0
>>> [ 40.593366] lr : dma_direct_map_sg+0x28c/0x2b0
>>> [ 40.597801] sp : ffff80000a6eba20
>>> [ 40.601107] x29: ffff80000a6eba20 x28: ffff000006d66080 x27:
>>> 0000000000000004
>>> [ 40.608233] x26: 0000000000000000 x25: ffff0000004de810 x24:
>>> 0000000000000000
>>> [ 40.615358] x23: 0000000000000002 x22: fffffc0000000000 x21:
>>> ffff800009153360
>>> [ 40.622484] x20: 0000000000000005 x19: 00000002ff700000 x18:
>>> ffffffffffffffff
>>> [ 40.629609] x17: 766f203036393034 x16: 2b30303030303766 x15:
>>> 6632303030303030
>>> [ 40.636735] x14: 3078302072646461 x13: ffff80000a433d58 x12:
>>> 00000000000002dc
>>> [ 40.643860] x11: 00000000000000f4 x10: ffff80000a48bd58 x9 :
>>> ffff80000a48bd58
>>> [ 40.650985] x8 : ffff80000a433d58 x7 : ffff80000a48bd58 x6 :
>>> 0000000000000000
>>> [ 40.658110] x5 : 000000000000bff4 x4 : 0000000000000000 x3 :
>>> 0000000000000000
>>> [ 40.665234] x2 : 0000000000000000 x1 : 0000000000000000 x0 :
>>> ffff0000004add00
>>> [ 40.672360] Call trace:
>>> [ 40.674800] dma_direct_map_sg+0x28c/0x2b0
>>> [ 40.678890] __dma_map_sg_attrs+0x28/0xa0
>>> [ 40.682895] dma_map_sg_attrs+0x10/0x30
>>> [ 40.686725] sdhci_pre_dma_transfer+0xcc/0x150
>>> [ 40.691165] sdhci_pre_req+0x3c/0x50
>>> [ 40.694734] mmc_blk_mq_issue_rq+0x25c/0x9d0
>>> [ 40.698997] mmc_mq_queue_rq+0x118/0x2b0
>>> [ 40.702912] blk_mq_dispatch_rq_list+0x19c/0x800
>>> [ 40.707521] blk_mq_do_dispatch_sched+0x2bc/0x350
>>> [ 40.712218] __blk_mq_sched_dispatch_requests+0x10c/0x160
>>> [ 40.717608] blk_mq_sched_dispatch_requests+0x40/0x80
>>> [ 40.722651] __blk_mq_run_hw_queue+0x80/0xc0
>>> [ 40.726911] blk_mq_run_work_fn+0x24/0x30
>>> [ 40.730913] process_one_work+0x1d0/0x320
>>> [ 40.734919] worker_thread+0x14c/0x450
>>> [ 40.738662] kthread+0x10c/0x110
>>> [ 40.741885] ret_from_fork+0x10/0x20
>>> [ 40.745457] ---[ end trace 0000000000000000 ]---
>>> [ 40.750160] ------------[ cut here ]------------
>>> [ 40.754770] WARNING: CPU: 0 PID: 7 at drivers/mmc/host/sdhci.c:1152
>>> sdhci_send_command+0x7fc/0xea0
>>> [ 40.763719] Modules linked in: uio_pdrv_genirq
>>> [ 40.768149] CPU: 0 PID: 7 Comm: kworker/0:0H Tainted: G W
>>> 5.19.0-next-20220808 #20
>>> [ 40.777090] Hardware name: Marvell A0-AC5X Board (DT)
>>> [ 40.782129] Workqueue: kblockd blk_mq_run_work_fn
>>> [ 40.786827] pstate: a04000c9 (NzCv daIF +PAN -UAO -TCO -DIT -SSBS
>>> BTYPE=--)
>>> [ 40.793775] pc : sdhci_send_command+0x7fc/0xea0
>>> [ 40.798297] lr : sdhci_send_command+0x644/0xea0
>>> [ 40.802821] sp : ffff80000a6eb980
>>> [ 40.806127] x29: ffff80000a6eb980 x28: ffff80000a6ebcf8 x27:
>>> 0000000000000002
>>> [ 40.813253] x26: 0000000000000000 x25: 0000000000000000 x24:
>>> ffff0000004237c0
>>> [ 40.820378] x23: 000000000000000b x22: ffff000006d825b8 x21:
>>> ffff000006d82628
>>> [ 40.827502] x20: ffff000006d825b8 x19: ffff000000423580 x18:
>>> ffffffffffffffff
>>> [ 40.834627] x17: 766f203036393034 x16: 2b30303030303766 x15:
>>> 6632303030303030
>>> [ 40.841751] x14: 3078302072646461 x13: ffff80000a433d58 x12:
>>> 00000000000002dc
>>> [ 40.848876] x11: 00000000000000f4 x10: ffff80000a48bd58 x9 :
>>> ffff80000a48bd58
>>> [ 40.856001] x8 : ffff80000a433d58 x7 : 0000000000000000 x6 :
>>> ffff0000004deaf8
>>> [ 40.863125] x5 : 0000000000000000 x4 : 0000000000000020 x3 :
>>> 0000000000000000
>>> [ 40.870250] x2 : 0000000000020401 x1 : 0000000000000001 x0 :
>>> 00000000ffffffe4
>>> [ 40.877374] Call trace:
>>> [ 40.879813] sdhci_send_command+0x7fc/0xea0
>>> [ 40.883989] sdhci_send_command_retry+0x40/0x140
>>> [ 40.888597] sdhci_request+0x70/0xd0
>>> [ 40.892167] __mmc_start_request+0x68/0x140
>>> [ 40.896345] mmc_start_request+0x78/0xa0
>>> [ 40.900260] mmc_blk_mq_issue_rq+0x284/0x9d0
>>> [ 40.904521] mmc_mq_queue_rq+0x118/0x2b0
>>> [ 40.908436] blk_mq_dispatch_rq_list+0x19c/0x800
>>> [ 40.913045] blk_mq_do_dispatch_sched+0x2bc/0x350
>>> [ 40.917741] __blk_mq_sched_dispatch_requests+0x10c/0x160
>>> [ 40.923131] blk_mq_sched_dispatch_requests+0x40/0x80
>>> [ 40.928173] __blk_mq_run_hw_queue+0x80/0xc0
>>> [ 40.932435] blk_mq_run_work_fn+0x24/0x30
>>> [ 40.936437] process_one_work+0x1d0/0x320
>>> [ 40.940442] worker_thread+0x14c/0x450
>>> [ 40.944184] kthread+0x10c/0x110
>>> [ 40.947407] ret_from_fork+0x10/0x20
>>> [ 40.950977] ---[ end trace 0000000000000000 ]---
>>> [ 40.960738] ------------[ cut here ]------------
>>> [ 40.965361] WARNING: CPU: 1 PID: 49 at drivers/mmc/host/sdhci.c:1152
>>> sdhci_send_command+0x7fc/0xea0
>>> [ 40.974403] Modules linked in: uio_pdrv_genirq
>>> [ 40.978843] CPU: 1 PID: 49 Comm: kworker/1:1H Tainted: G W
>>> 5.19.0-next-20220808 #20
>>> [ 40.987873] Hardware name: Marvell A0-AC5X Board (DT)
>>> [ 40.992913] Workqueue: kblockd blk_mq_run_work_fn
>>> [ 40.997613] pstate: a04000c9 (NzCv daIF +PAN -UAO -TCO -DIT -SSBS
>>> BTYPE=--)
>>> [ 41.004562] pc : sdhci_send_command+0x7fc/0xea0
>>> [ 41.009086] lr : sdhci_send_command+0x644/0xea0
>>> [ 41.013610] sp : ffff80000a9db980
>>> [ 41.016915] x29: ffff80000a9db980 x28: ffff80000a9dbcf8 x27:
>>> 0000000000000002
>>> [ 41.024041] x26: 0000000000000000 x25: 0000000000000000 x24:
>>> ffff0000004237c0
>>> [ 41.031166] x23: 000000000000000b x22: ffff000006d05eb8 x21:
>>> ffff000006d05f28
>>> [ 41.038291] x20: ffff000006d05eb8 x19: ffff000000423580 x18:
>>> fffffc0003fde640
>>> [ 41.045416] x17: 0000000000000000 x16: 0000000000000000 x15:
>>> 0000000000000000
>>> [ 41.052540] x14: 0000000000000002 x13: 0000000000100000 x12:
>>> 0000000000000000
>>> [ 41.059664] x11: 0000000000000000 x10: 0000000000000b10 x9 :
>>> ffff80000a9db9e0
>>> [ 41.066789] x8 : ffff000000649af0 x7 : 0000000000000000 x6 :
>>> ffff0000004deaf8
>>> [ 41.073914] x5 : 0000000000000000 x4 : 0000000000000020 x3 :
>>> 0000000000000000
>>> [ 41.081039] x2 : 0000000000020401 x1 : 0000000000000001 x0 :
>>> 00000000ffffffe4
>>> [ 41.088164] Call trace:
>>> [ 41.090603] sdhci_send_command+0x7fc/0xea0
>>> [ 41.094779] sdhci_send_command_retry+0x40/0x140
>>> [ 41.099379] sdhci_request+0x70/0xd0
>>> [ 41.102949] __mmc_start_request+0x68/0x140
>>> [ 41.107127] mmc_start_request+0x78/0xa0
>>> [ 41.111042] mmc_blk_mq_issue_rq+0x284/0x9d0
>>> [ 41.115305] mmc_mq_queue_rq+0x118/0x2b0
>>> [ 41.119221] blk_mq_dispatch_rq_list+0x19c/0x800
>>> [ 41.123831] blk_mq_do_dispatch_sched+0x2bc/0x350
>>> [ 41.128528] __blk_mq_sched_dispatch_requests+0x10c/0x160
>>> [ 41.133917] blk_mq_sched_dispatch_requests+0x40/0x80
>>> [ 41.138959] __blk_mq_run_hw_queue+0x80/0xc0
>>> [ 41.143222] blk_mq_run_work_fn+0x24/0x30
>>> [ 41.147223] process_one_work+0x1d0/0x320
>>> [ 41.151230] worker_thread+0x14c/0x450
>>> [ 41.154973] kthread+0x10c/0x110
>>> [ 41.158195] ret_from_fork+0x10/0x20
>>> [ 41.161766] ---[ end trace 0000000000000000 ]---
>>> [ 41.171543] ------------[ cut here ]------------
>>> [ 41.176169] WARNING: CPU: 1 PID: 49 at drivers/mmc/host/sdhci.c:1152
>>> sdhci_send_command+0x7fc/0xea0
>>> [ 41.185210] Modules linked in: uio_pdrv_genirq
>>> [ 41.189650] CPU: 1 PID: 49 Comm: kworker/1:1H Tainted: G W
>>> 5.19.0-next-20220808 #20
>>> [ 41.198679] Hardware name: Marvell A0-AC5X Board (DT)
>>> [ 41.203720] Workqueue: kblockd blk_mq_run_work_fn
>>> [ 41.208420] pstate: a04000c9 (NzCv daIF +PAN -UAO -TCO -DIT -SSBS
>>> BTYPE=--)
>>> [ 41.215369] pc : sdhci_send_command+0x7fc/0xea0
>>> [ 41.219892] lr : sdhci_send_command+0x644/0xea0
>>> [ 41.224414] sp : ffff80000a9db980
>>> [ 41.227721] x29: ffff80000a9db980 x28: ffff80000a9dbcf8 x27:
>>> 0000000000000002
>>> [ 41.234846] x26: 0000000000000000 x25: 0000000000000000 x24:
>>> ffff0000004237c0
>>> [ 41.241972] x23: 000000000000000b x22: ffff000006d001b8 x21:
>>> ffff000006d00228
>>> [ 41.249097] x20: ffff000006d001b8 x19: ffff000000423580 x18:
>>> 0000000000000000
>>> [ 41.256223] x17: 0000000000000000 x16: 0000000000000000 x15:
>>> 0000000000000000
>>> [ 41.263348] x14: 0000000000000002 x13: 0000000000100000 x12:
>>> 0000000000000000
>>> [ 41.270473] x11: 0000000000000001 x10: 0000000000000b10 x9 :
>>> ffff80000a9db9e0
>>> [ 41.277598] x8 : ffff000000649af0 x7 : 0000000000000000 x6 :
>>> ffff0000004deaf8
>>> [ 41.284722] x5 : 0000000000000000 x4 : 0000000000000020 x3 :
>>> 0000000000000000
>>> [ 41.291846] x2 : 0000000000020401 x1 : 0000000000000001 x0 :
>>> 00000000ffffffe4
>>> [ 41.298971] Call trace:
>>> [ 41.301410] sdhci_send_command+0x7fc/0xea0
>>> [ 41.305588] sdhci_send_command_retry+0x40/0x140
>>> [ 41.310198] sdhci_request+0x70/0xd0
>>> [ 41.313769] __mmc_start_request+0x68/0x140
>>> [ 41.317946] mmc_start_request+0x78/0xa0
>>> [ 41.321862] mmc_blk_mq_issue_rq+0x284/0x9d0
>>> [ 41.326125] mmc_mq_queue_rq+0x118/0x2b0
>>> [ 41.330040] blk_mq_dispatch_rq_list+0x19c/0x800
>>> [ 41.334649] blk_mq_do_dispatch_sched+0x2bc/0x350
>>> [ 41.339346] __blk_mq_sched_dispatch_requests+0x10c/0x160
>>> [ 41.344735] blk_mq_sched_dispatch_requests+0x40/0x80
>>> [ 41.349779] __blk_mq_run_hw_queue+0x80/0xc0
>>> [ 41.354040] blk_mq_run_work_fn+0x24/0x30
>>> [ 41.358041] process_one_work+0x1d0/0x320
>>> [ 41.362048] worker_thread+0x14c/0x450
>>> [ 41.365791] kthread+0x10c/0x110
>>> [ 41.369014] ret_from_fork+0x10/0x20
>>> [ 41.372584] ---[ end trace 0000000000000000 ]---
>>> [ 41.382383] ------------[ cut here ]------------
>>> [ 41.387009] WARNING: CPU: 1 PID: 49 at drivers/mmc/host/sdhci.c:1152
>>> sdhci_send_command+0x7fc/0xea0
>>> [ 41.396051] Modules linked in: uio_pdrv_genirq
>>> [ 41.400491] CPU: 1 PID: 49 Comm: kworker/1:1H Tainted: G W
>>> 5.19.0-next-20220808 #20
>>> [ 41.409520] Hardware name: Marvell A0-AC5X Board (DT)
>>> [ 41.414561] Workqueue: kblockd blk_mq_run_work_fn
>>> [ 41.419261] pstate: a04000c9 (NzCv daIF +PAN -UAO -TCO -DIT -SSBS
>>> BTYPE=--)
>>> [ 41.426210] pc : sdhci_send_command+0x7fc/0xea0
>>> [ 41.430734] lr : sdhci_send_command+0x644/0xea0
>>> [ 41.435256] sp : ffff80000a9db980
>>> [ 41.438562] x29: ffff80000a9db980 x28: ffff80000a9dbcf8 x27:
>>> 0000000000000002
>>> [ 41.445687] x26: 0000000000000000 x25: 0000000000000000 x24:
>>> ffff0000004237c0
>>> [ 41.452812] x23: 000000000000000b x22: ffff000006d004b8 x21:
>>> ffff000006d00528
>>> [ 41.459937] x20: ffff000006d004b8 x19: ffff000000423580 x18:
>>> 0000000000000000
>>> [ 41.467062] x17: 0000000000000000 x16: 0000000000000000 x15:
>>> 0000000000000000
>>> [ 41.474187] x14: 0000000000000002 x13: 00000000000ff000 x12:
>>> 0000000000000000
>>> [ 41.481311] x11: 0000000000000001 x10: 0000000000000b10 x9 :
>>> ffff80000a9db9e0
>>> [ 41.488436] x8 : ffff000000649af0 x7 : 0000000000000000 x6 :
>>> ffff0000004deaf8
>>> [ 41.495561] x5 : 0000000000000000 x4 : 0000000000000020 x3 :
>>> 0000000000000000
>>> [ 41.502685] x2 : 0000000000020401 x1 : 0000000000000001 x0 :
>>> 00000000ffffffe4
>>> [ 41.509811] Call trace:
>>> [ 41.512250] sdhci_send_command+0x7fc/0xea0
>>> [ 41.516427] sdhci_send_command_retry+0x40/0x140
>>> [ 41.521035] sdhci_request+0x70/0xd0
>>> [ 41.524607] __mmc_start_request+0x68/0x140
>>> [ 41.528784] mmc_start_request+0x78/0xa0
>>> [ 41.532699] mmc_blk_mq_issue_rq+0x284/0x9d0
>>> [ 41.536961] mmc_mq_queue_rq+0x118/0x2b0
>>> [ 41.540876] blk_mq_dispatch_rq_list+0x19c/0x800
>>> [ 41.545485] blk_mq_do_dispatch_sched+0x2bc/0x350
>>> [ 41.550182] __blk_mq_sched_dispatch_requests+0x10c/0x160
>>> [ 41.555570] blk_mq_sched_dispatch_requests+0x40/0x80
>>> [ 41.560613] __blk_mq_run_hw_queue+0x80/0xc0
>>> [ 41.564874] blk_mq_run_work_fn+0x24/0x30
>>> [ 41.568875] process_one_work+0x1d0/0x320
>>> [ 41.572881] worker_thread+0x14c/0x450
>>> [ 41.576624] kthread+0x10c/0x110
>>> [ 41.579847] ret_from_fork+0x10/0x20
>>> [ 41.583428] ---[ end trace 0000000000000000 ]---
>>>
>>>
>>>>>
>>>>>> Do I understand correctly that the swiotlb will be used in case DMA
>>>>>> engine could not map the page in the specified range (limited by dma-ranges or
>>>>>> dma-mask) ?
>>>>>>
>>>>>>>
>>>>>>>> + host->quirks |= SDHCI_QUIRK_BROKEN_DMA;
>>>>>>>> + host->quirks |= SDHCI_QUIRK_BROKEN_ADMA;
>>>>>>>> + dev_info(mmc_dev(mmc), "Disabling DMA because of 2GB DMA access limit.\n");
>>>>>>>> + }
>>>>>>>> +
>>>>>>>> return xenon_phy_parse_params(dev, host);
>>>>>>>> }
>>>>>>>>
>>>>>>>> @@ -682,6 +694,7 @@ static const struct of_device_id sdhci_xenon_dt_ids[] = {
>>>>>>>> { .compatible = "marvell,armada-ap807-sdhci", .data = (void *)XENON_AP807},
>>>>>>>> { .compatible = "marvell,armada-cp110-sdhci", .data = (void *)XENON_CP110},
>>>>>>>> { .compatible = "marvell,armada-3700-sdhci", .data = (void *)XENON_A3700},
>>>>>>>> + { .compatible = "marvell,ac5-sdhci", .data = (void *)XENON_AP806},
>>>>>>>> {}
>>>>>>>> };
>>>>>>>> MODULE_DEVICE_TABLE(of, sdhci_xenon_dt_ids);
>>>>>>>
>>>>>>>
>>>>>>> --
>>>>>>> Florian
>>>>>>
>>>>>> Thanks,
>>>>>>
>>>>>
>>>>> Regards,
>>>>
>>>
>>> Thanks,
>>> Vadym Kochan
>>

Next message: Chengming Zhou: "[PATCH v4 7/9] sched/fair: allow changing cgroup of new forked task"
Previous message: Chengming Zhou: "[PATCH v4 6/9] sched/fair: fix another detach on unattached task corner case"
In reply to: Vadym Kochan: "Re: [PATCH] mmc: sdhci-xenon: Fix 2G limitation on AC5 SoC"
Next in thread: Robin Murphy: "Re: [PATCH] mmc: sdhci-xenon: Fix 2G limitation on AC5 SoC"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]