Re: [PATCH v5 03/14] perf test: Add build infra for perf test tools for CoreSight tests

From: Leo Yan
Date: Sat Aug 06 2022 - 23:59:41 EST

Next message: Leo Yan: "Re: [PATCH v5 04/14] perf test: Add asm pureloop test tool"
Previous message: Kevin Lu: "[PATCH v1 1/1] drivers: Modify some parts"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On Thu, Jul 28, 2022 at 03:52:45PM +0100, carsten.haitzler@xxxxxxxxxxxx wrote:
> From: "Carsten Haitzler (Rasterman)" <raster@xxxxxxxxxxxxx>
>
> This adds the initial build infrastructure (makefiles maintainers
> information) for adding follow-on tests for CoreSight.
>
> Signed-off-by: Carsten Haitzler <carsten.haitzler@xxxxxxx>
> ---
> MAINTAINERS | 1 +
> tools/perf/Makefile.perf | 18 ++++++++++---
> tools/perf/tests/shell/coresight/Makefile | 26 +++++++++++++++++++
> .../tests/shell/coresight/Makefile.miniconfig | 24 +++++++++++++++++
> 4 files changed, 66 insertions(+), 3 deletions(-)
> create mode 100644 tools/perf/tests/shell/coresight/Makefile
> create mode 100644 tools/perf/tests/shell/coresight/Makefile.miniconfig
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 171563d8dc14..87e4ac463429 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -1989,6 +1989,7 @@ F: drivers/hwtracing/coresight/*
> F: include/dt-bindings/arm/coresight-cti-dt.h
> F: include/linux/coresight*
> F: samples/coresight/*
> +F: tools/perf/tests/shell/coresight/*
> F: tools/perf/arch/arm/util/auxtrace.c
> F: tools/perf/arch/arm/util/cs-etm.c
> F: tools/perf/arch/arm/util/cs-etm.h
> diff --git a/tools/perf/Makefile.perf b/tools/perf/Makefile.perf
> index 8f738e11356d..edb621ace2e2 100644
> --- a/tools/perf/Makefile.perf
> +++ b/tools/perf/Makefile.perf
> @@ -629,7 +629,15 @@ sync_file_range_tbls := $(srctree)/tools/perf/trace/beauty/sync_file_range.sh
> $(sync_file_range_arrays): $(linux_uapi_dir)/fs.h $(sync_file_range_tbls)
> $(Q)$(SHELL) '$(sync_file_range_tbls)' $(linux_uapi_dir) > $@
>
> -all: shell_compatibility_test $(ALL_PROGRAMS) $(LANG_BINDINGS) $(OTHER_PROGRAMS)
> +TESTS_CORESIGHT_DIR := $(srctree)/tools/perf/tests/shell/coresight
> +
> +tests-coresight-targets: FORCE
> + $(Q)$(MAKE) -C $(TESTS_CORESIGHT_DIR)
> +
> +tests-coresight-targets-clean:
> + $(Q)$(MAKE) -C $(TESTS_CORESIGHT_DIR) clean
> +
> +all: shell_compatibility_test $(ALL_PROGRAMS) $(LANG_BINDINGS) $(OTHER_PROGRAMS) tests-coresight-targets
>
> # Create python binding output directory if not already present
> _dummy := $(shell [ -d '$(OUTPUT)python' ] || mkdir -p '$(OUTPUT)python')
> @@ -1015,7 +1023,10 @@ install-tests: all install-gtk
> $(INSTALL) -d -m 755 '$(DESTDIR_SQ)$(perfexec_instdir_SQ)/tests/shell'; \
> $(INSTALL) tests/shell/*.sh '$(DESTDIR_SQ)$(perfexec_instdir_SQ)/tests/shell'; \
> $(INSTALL) -d -m 755 '$(DESTDIR_SQ)$(perfexec_instdir_SQ)/tests/shell/lib'; \
> - $(INSTALL) tests/shell/lib/*.sh '$(DESTDIR_SQ)$(perfexec_instdir_SQ)/tests/shell/lib'
> + $(INSTALL) tests/shell/lib/*.sh '$(DESTDIR_SQ)$(perfexec_instdir_SQ)/tests/shell/lib'; \
> + $(INSTALL) -d -m 755 '$(DESTDIR_SQ)$(perfexec_instdir_SQ)/tests/shell/coresight'; \
> + $(INSTALL) tests/shell/coresight/*.sh '$(DESTDIR_SQ)$(perfexec_instdir_SQ)/tests/shell/coresight'
> + $(Q)$(MAKE) -C tests/shell/coresight install-tests
>
> install-bin: install-tools install-tests install-traceevent-plugins
>
> @@ -1085,7 +1096,7 @@ endif # BUILD_BPF_SKEL
> bpf-skel-clean:
> $(call QUIET_CLEAN, bpf-skel) $(RM) -r $(SKEL_TMP_OUT) $(SKELETONS)
>
> -clean:: $(LIBTRACEEVENT)-clean $(LIBAPI)-clean $(LIBBPF)-clean $(LIBSUBCMD)-clean $(LIBPERF)-clean fixdep-clean python-clean bpf-skel-clean
> +clean:: $(LIBTRACEEVENT)-clean $(LIBAPI)-clean $(LIBBPF)-clean $(LIBSUBCMD)-clean $(LIBPERF)-clean fixdep-clean python-clean bpf-skel-clean tests-coresight-targets-clean
> $(call QUIET_CLEAN, core-objs) $(RM) $(LIBPERF_A) $(OUTPUT)perf-archive $(OUTPUT)perf-iostat $(LANG_BINDINGS)
> $(Q)find $(or $(OUTPUT),.) -name '*.o' -delete -o -name '\.*.cmd' -delete -o -name '\.*.d' -delete
> $(Q)$(RM) $(OUTPUT).config-detected
> @@ -1143,5 +1154,6 @@ FORCE:
> .PHONY: shell_compatibility_test please_set_SHELL_PATH_to_a_more_modern_shell
> .PHONY: .FORCE-PERF-VERSION-FILE TAGS tags cscope FORCE prepare
> .PHONY: libtraceevent_plugins archheaders
> +.PHONY: $(TESTS_CORESIGHT_TARGETS)

TESTS_CORESIGHT_TARGETS is not used anywhere else, should remove it?

> endif # force_fixdep
> diff --git a/tools/perf/tests/shell/coresight/Makefile b/tools/perf/tests/shell/coresight/Makefile
> new file mode 100644
> index 000000000000..3b816bb4ced3
> --- /dev/null
> +++ b/tools/perf/tests/shell/coresight/Makefile
> @@ -0,0 +1,26 @@
> +# SPDX-License-Identifier: GPL-2.0-only
> +# Carsten Haitzler <carsten.haitzler@xxxxxxx>, 2021
> +include ../../../../../tools/scripts/Makefile.include
> +include ../../../../../tools/scripts/Makefile.arch
> +include ../../../../../tools/scripts/utilities.mak
> +
> +SUBDIRS =
> +
> +all: $(SUBDIRS)
> +$(SUBDIRS):
> + $(Q)$(MAKE) -C $@
> +
> +INSTALLDIRS = $(SUBDIRS:%=install-%)
> +
> +install-tests: $(INSTALLDIRS)
> +$(INSTALLDIRS):
> + $(Q)$(MAKE) -C $(@:install-%=%) install-tests

I can see here you add a prefix "install-" for every sub directory
string, and then removed this prefix when invoke "make -C" command.

I know you have reason for doing this way, could you explain why not
directly use $(SUBDIRS) for INSTALLDIRS?

> +
> +CLEANDIRS = $(SUBDIRS:%=clean-%)
> +
> +clean: $(CLEANDIRS)
> +$(CLEANDIRS):
> + $(Q)$(MAKE) -C $(@:clean-%=%) clean >/dev/null

Same question of using prefix "clean-" for variable CLEANDIRS.

> +
> +.PHONY: all clean $(SUBDIRS) $(CLEANDIRS) $(INSTALLDIRS)
> +
> diff --git a/tools/perf/tests/shell/coresight/Makefile.miniconfig b/tools/perf/tests/shell/coresight/Makefile.miniconfig
> new file mode 100644
> index 000000000000..a65482d769ab
> --- /dev/null
> +++ b/tools/perf/tests/shell/coresight/Makefile.miniconfig
> @@ -0,0 +1,24 @@
> +# SPDX-License-Identifier: GPL-2.0-only
> +# Carsten Haitzler <carsten.haitzler@xxxxxxx>, 2021
> +
> +ifndef DESTDIR
> +prefix ?= $(HOME)
> +endif
> +
> +DESTDIR_SQ = $(subst ','\'',$(DESTDIR))
> +perfexecdir = libexec/perf-core
> +perfexec_instdir = $(perfexecdir)
> +
> +ifneq ($(filter /%,$(firstword $(perfexecdir))),)
> +perfexec_instdir = $(perfexecdir)
> +else
> +perfexec_instdir = $(prefix)/$(perfexecdir)
> +endif
> +
> +perfexec_instdir_SQ = $(subst ','\'',$(perfexec_instdir))

I know these variables are copied from Makefile.config, just wandering
if we can directly export these variables from high level makefile, so
the sub-make can inherit the variables.

E.g. we can add below line in Makefile.config:

export perfexec_instdir_SQ

Please let me know if you observe any issue for this.

Thanks,
Leo

> +INSTALL = install
> +INSTDIR_SUB = tests/shell/coresight
> +
> +include ../../../../../scripts/Makefile.include
> +include ../../../../../scripts/Makefile.arch
> +include ../../../../../scripts/utilities.mak
> --
> 2.32.0
>

Next message: Leo Yan: "Re: [PATCH v5 04/14] perf test: Add asm pureloop test tool"
Previous message: Kevin Lu: "[PATCH v1 1/1] drivers: Modify some parts"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]