Re: [PATCH v4 3/4] arm64: dts: meson: Add DDR PMU node

[Jiucheng Xu]

On 2022/8/5 16:22, Krzysztof Kozlowski wrote:
> [ EXTERNAL EMAIL ]
>
> On 05/08/2022 09:14, Jiucheng Xu wrote:
> > Add DDR PMU device node for G12 series SoC
> >
> > Signed-off-by: Jiucheng Xu <jiucheng.xu@xxxxxxxxxxx>
> > ---
> > Changes v3 -> v4:
> >    - No change
> >
> > Changes v2 -> v3:
> >    - No change
> >
> > Changes v1 -> v2:
> >    - Remove model, dmc_nr, chann_nr properties
> >    - Add g12a-ddr-pmu, g12b-ddr-pmu, sm1-ddr-pmu compatibles as
> >      identifier
> > ---
> >   arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi | 7 +++++++
> >   arch/arm64/boot/dts/amlogic/meson-g12a.dtsi       | 4 ++++
> >   arch/arm64/boot/dts/amlogic/meson-g12b.dtsi       | 4 ++++
> >   arch/arm64/boot/dts/amlogic/meson-sm1.dtsi        | 4 ++++
> >   4 files changed, 19 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
> > index 45947c1031c4..7e556fe575be 100644
> > --- a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
> > +++ b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
> > @@ -2146,6 +2146,13 @@ hdmi_tx_out: endpoint {
> >   			};
> >   		};
> >   
> > +		ddr_pmu: ddr_pmu@ff638000 {
> No underscores in node names.
>
> Node names should be generic, so pmu.
> https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation
Okay, I will modify it.
> > +			compatible = "amlogic,g12-ddr-pmu";
> > +			reg = <0x0 0xff638000 0x0 0x100
> > +			       0x0 0xff638c00 0x0 0x100>;
> > +			interrupts = <GIC_SPI 52 IRQ_TYPE_EDGE_RISING>;
> > +		};
> > +
> >   		gic: interrupt-controller@ffc01000 {
> >   			compatible = "arm,gic-400";
> >   			reg = <0x0 0xffc01000 0 0x1000>,
> > diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
> > index fb0ab27d1f64..4a32e081e70e 100644
> > --- a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
> > +++ b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
> > @@ -133,3 +133,7 @@ map1 {
> >   		};
> >   	};
> >   };
> > +
> > +&ddr_pmu {
> > +	compatible = "amlogic,g12a-ddr-pmu";
> > +};
> Adding nodes at the end causes conflicts. They should be added in some
> order...
Is alphabetical order okay?
> Best regards,
> Krzysztof
--
Thanks,
Jiucheng