[PATCH 2/5] arm64: dts: qcom: sdm845-db845c: drop gpios from CCI I2C sensors
From: Krzysztof Kozlowski
Date: Tue Aug 02 2022 - 11:40:26 EST
The OV7251 and OV8856 camera sensor bindings do not allow
property "gpios" and Linux driver does not parse it.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
---
Not tested on hardware.
---
arch/arm64/boot/dts/qcom/sdm845-db845c.dts | 4 ----
1 file changed, 4 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
index b9304f81290a..f313f6964810 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
@@ -1214,8 +1214,6 @@ camera@10 {
reset-gpios = <&tlmm 9 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&cam0_default>;
- gpios = <&tlmm 13 0>,
- <&tlmm 9 GPIO_ACTIVE_LOW>;
clocks = <&clock_camcc CAM_CC_MCLK0_CLK>;
clock-names = "xvclk";
@@ -1256,8 +1254,6 @@ camera@60 {
enable-gpios = <&tlmm 21 0>;
pinctrl-names = "default";
pinctrl-0 = <&cam3_default>;
- gpios = <&tlmm 16 0>,
- <&tlmm 21 0>;
clocks = <&clock_camcc CAM_CC_MCLK3_CLK>;
clock-names = "xclk";
--
2.34.1