Re: [PATCH 2/4] media: dt-bindings: media: Document RZ/G2L CRU

[Krzysztof Kozlowski]

On 01/08/2022 23:47, Lad Prabhakar wrote:
> Document the CRU block found on Renesas RZ/G2L SoC's.
> 
> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
> ---
> RFC v2 -> v1
> * Dropped endpoint stuff from port1 as suggested by Rob
> * Updated description for endpoint
> 
> RFC v1 -> RFC v2
> * Dropped CSI
> ---
>  .../bindings/media/renesas,rzg2l-cru.yaml     | 142 ++++++++++++++++++
>  1 file changed, 142 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml
> 
> diff --git a/Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml b/Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml
> new file mode 100644
> index 000000000000..d7389693dae9
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml
> @@ -0,0 +1,142 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +# Copyright (C) 2022 Renesas Electronics Corp.
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/media/renesas,rzg2l-cru.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Renesas RZ/G2L (and alike SoC's) Camera Data Receiving Unit (CRU) Image processing
> +
> +maintainers:
> +  - Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
> +
> +description:
> +  The CRU image processing module is a data conversion module equipped with pixel
> +  color space conversion, LUT, pixel format conversion, etc. An MIPI CSI-2 input and
> +  parallel (including ITU-R BT.656) input are provided as the image sensor interface.
> +
> +properties:
> +  compatible:
> +    oneOf:

No need for oneOf, unless you already have a patch adding second case to
oneOf.

> +      - items:
> +          - enum:
> +              - renesas,r9a07g044-cru     # RZ/G2{L,LC}
> +              - renesas,r9a07g054-cru     # RZ/V2L
> +          - const: renesas,rzg2l-cru
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 3
> +
> +  interrupt-names:
> +    items:
> +      - const: image_conv
> +      - const: image_conv_err
> +      - const: axi_mst_err
> +
> +  clocks:
> +    items:
> +      - description: CRU Main clock
> +      - description: CPU Register access clock
> +      - description: CRU image transfer clock
> +
> +  clock-names:
> +    items:
> +      - const: vclk
> +      - const: pclk
> +      - const: aclk
> +
> +  power-domains:
> +    maxItems: 1
> +
> +  resets:
> +    items:
> +      - description: CRU_PRESETN reset terminal
> +      - description: CRU_ARESETN reset terminal
> +
> +  reset-names:
> +    items:
> +      - const: presetn
> +      - const: aresetn
> +
> +  ports:
> +    $ref: /schemas/graph.yaml#/properties/ports
> +
> +    properties:
> +      port@0:
> +        $ref: /schemas/graph.yaml#/$defs/port-base
> +        unevaluatedProperties: false
> +        description:
> +          Input port node, single endpoint describing a parallel input source.
> +
> +        properties:
> +          endpoint:
> +            $ref: video-interfaces.yaml#
> +            unevaluatedProperties: false
> +
> +            properties:
> +              hsync-active: true
> +              vsync-active: true
> +              bus-width: true
> +              data-shift: true
> +
> +      port@1:
> +        $ref: /schemas/graph.yaml#/properties/port
> +        description:
> +          Input port node, describing the Image Processing module connected to the
> +          CSI-2 receiver.
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +  - interrupt-names
> +  - clocks
> +  - clock-names
> +  - resets
> +  - reset-names
> +  - power-domains
> +
> +additionalProperties: false
> +
> +examples:
> +  # Device node example with CSI-2
> +  - |
> +    #include <dt-bindings/clock/r9a07g044-cpg.h>
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> +    cru: video@10830000 {
> +            compatible = "renesas,r9a07g044-cru", "renesas,rzg2l-cru";

Also 4-space for DTS example, please.



Best regards,
Krzysztof