Re: [PATCH v5 2/2] iio: humidity: hdc100x: add manufacturer and device ID check

From: Andy Shevchenko
Date: Thu Jul 28 2022 - 16:43:39 EST


On Thu, Jul 28, 2022 at 3:32 PM Potin Lai <potin.lai.pt@xxxxxxxxx> wrote:
>
> Add manufacturer and device ID checking during probe, and skip the
> checking if chip model not supported.
>
> Supported:
> - HDC1000
> - HDC1010
> - HDC1050
> - HDC1080
>
> Not supported:
> - HDC1008

This one is okay now, thanks!
Reviewed-by: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>

> Signed-off-by: Potin Lai <potin.lai.pt@xxxxxxxxx>
> ---
> drivers/iio/humidity/hdc100x.c | 67 ++++++++++++++++++++++++++++------
> 1 file changed, 56 insertions(+), 11 deletions(-)
>
> diff --git a/drivers/iio/humidity/hdc100x.c b/drivers/iio/humidity/hdc100x.c
> index 0d514818635cb..31f18cc1cf63c 100644
> --- a/drivers/iio/humidity/hdc100x.c
> +++ b/drivers/iio/humidity/hdc100x.c
> @@ -34,6 +34,23 @@
> #define HDC100X_REG_CONFIG_ACQ_MODE BIT(12)
> #define HDC100X_REG_CONFIG_HEATER_EN BIT(13)
>
> +#define HDC100X_REG_MFR_ID 0xFE
> +#define HDC100X_REG_DEV_ID 0xFF
> +
> +#define HDC100X_MFR_ID 0x5449
> +
> +struct hdc100x_chip_data {
> + bool support_mfr_check;
> +};
> +
> +static const struct hdc100x_chip_data hdc100x_chip_data = {
> + .support_mfr_check = true,
> +};
> +
> +static const struct hdc100x_chip_data hdc1008_chip_data = {
> + .support_mfr_check = false,
> +};
> +
> struct hdc100x_data {
> struct i2c_client *client;
> struct mutex lock;
> @@ -351,8 +368,32 @@ static const struct iio_info hdc100x_info = {
> .attrs = &hdc100x_attribute_group,
> };
>
> +static int hdc100x_read_mfr_id(struct i2c_client *client)
> +{
> + return i2c_smbus_read_word_swapped(client, HDC100X_REG_MFR_ID);
> +}
> +
> +static int hdc100x_read_dev_id(struct i2c_client *client)
> +{
> + return i2c_smbus_read_word_swapped(client, HDC100X_REG_DEV_ID);
> +}
> +
> +static bool is_valid_hdc100x(struct i2c_client *client)
> +{
> + int mfr_id, dev_id;
> +
> + mfr_id = hdc100x_read_mfr_id(client);
> + dev_id = hdc100x_read_dev_id(client);
> + if (mfr_id == HDC100X_MFR_ID &&
> + (dev_id == 0x1000 || dev_id == 0x1050))
> + return true;
> +
> + return false;
> +}
> +
> static int hdc100x_probe(struct i2c_client *client)
> {
> + const struct hdc100x_chip_data *chip_data;
> struct iio_dev *indio_dev;
> struct hdc100x_data *data;
> int ret;
> @@ -361,6 +402,10 @@ static int hdc100x_probe(struct i2c_client *client)
> I2C_FUNC_SMBUS_BYTE | I2C_FUNC_I2C))
> return -EOPNOTSUPP;
>
> + chip_data = device_get_match_data(&client->dev);
> + if (chip_data->support_mfr_check && !is_valid_hdc100x(client))
> + return -EINVAL;
> +
> indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
> if (!indio_dev)
> return -ENOMEM;
> @@ -396,22 +441,22 @@ static int hdc100x_probe(struct i2c_client *client)
> }
>
> static const struct i2c_device_id hdc100x_id[] = {
> - { "hdc100x", 0 },
> - { "hdc1000", 0 },
> - { "hdc1008", 0 },
> - { "hdc1010", 0 },
> - { "hdc1050", 0 },
> - { "hdc1080", 0 },
> + { "hdc100X", (kernel_ulong_t)&hdc100x_chip_data },
> + { "hdc1000", (kernel_ulong_t)&hdc100x_chip_data },
> + { "hdc1008", (kernel_ulong_t)&hdc1008_chip_data },
> + { "hdc1010", (kernel_ulong_t)&hdc100x_chip_data },
> + { "hdc1050", (kernel_ulong_t)&hdc100x_chip_data },
> + { "hdc1080", (kernel_ulong_t)&hdc100x_chip_data },
> { }
> };
> MODULE_DEVICE_TABLE(i2c, hdc100x_id);
>
> static const struct of_device_id hdc100x_dt_ids[] = {
> - { .compatible = "ti,hdc1000" },
> - { .compatible = "ti,hdc1008" },
> - { .compatible = "ti,hdc1010" },
> - { .compatible = "ti,hdc1050" },
> - { .compatible = "ti,hdc1080" },
> + { .compatible = "ti,hdc1000", .data = &hdc100x_chip_data },
> + { .compatible = "ti,hdc1008", .data = &hdc1008_chip_data },
> + { .compatible = "ti,hdc1010", .data = &hdc100x_chip_data },
> + { .compatible = "ti,hdc1050", .data = &hdc100x_chip_data },
> + { .compatible = "ti,hdc1080", .data = &hdc100x_chip_data },
> { }
> };
> MODULE_DEVICE_TABLE(of, hdc100x_dt_ids);
> --
> 2.31.1
>


--
With Best Regards,
Andy Shevchenko