Re: [PATCH v2 1/4] perf/amlogic: Add support for Amlogic meson G12 SoC DDR PMU driver

From: Christian Hewitt
Date: Thu Jul 28 2022 - 07:04:00 EST



> On 27 Jul 2022, at 3:03 am, Jiucheng Xu <jiucheng.xu@xxxxxxxxxxx> wrote:
>
> This patch adds support Amlogic meson G12 series SoC
> DDR bandwidth PMU driver framework and interfaces.
>
> The PMU not only can monitor the total DDR bandwidth,
> but also the bandwidth which is from individual IP module.
>
> Example usage:
>
> $ perf stat -a -e aml_ddr_bw/total_rw_bytes/ -I 1000 sleep 10
>
> - or -
>
> $ perf stat -a -e \
> aml_ddr_bw/total_rw_bytes/,\
> aml_ddr_bw/chan_1_rw_bytes,arm=1/ -I 1000 \
> sleep 10
>
> g12 SoC support 4 channels to monitor DDR bandwidth
> simultaneously. Each channel can monitor up to 4 IP modules
> simultaneously.
>
> For Instance, If you want to get the sum of DDR bandwidth
> from CPU, GPU, USB3.0 and VDEC. You can use the following
> command parameters to display.
>
> $ perf stat -a -e \
> aml_ddr_bw/chan_2_rw_bytes,arm=1,gpu=1,usb3_0=1,nna=1/ -I 1000 \
> sleep 10
>
> Other events are supported, and advertised via perf list.
>
> Signed-off-by: Jiucheng Xu <jiucheng.xu@xxxxxxxxxxx>
> Reported-by: kernel test robot <lkp@xxxxxxxxx>
> ---
> Changes v1 -> v2:
> - Remove inline to let GCC make the decisions
> - Remove spinlock
> - Remove ddr_cnt_accumulate()
> - Remove the message which only indicate a bug
> - Remove all dev_warn() message
> - Use hweight64() helper instead of whole loop
> - Remove setting of hwc
> - Use for_each_set_bit() helper for bit loop
> - Use sysfs_emit() in sysfs show
> - Remove checking for bugs
> - Replace irq_set_affinity_hint() to irq_set_affinity()
> - Remove #ifdef CONFIG_OF
> - Use devm_platform_ioremap_resource() instead of
> platform_get_resource()&ioremap()
> - Use platform_get_irq() instead of platform_get_resource()&ioremap()
> - Replace IRQF_SHARED to IRQF_NOBALANCING
> - Remove meaningless log like "init ok"
> - Use compatible instead of creating new property to distinguish
> different platform.
> - Use the is_visible callback to avoid exposing unsupported fmt_attr
> - Use module_platform_driver_probe() instead of module_init/exit
> ---
> MAINTAINERS | 7 +
> drivers/perf/Kconfig | 2 +
> drivers/perf/Makefile | 1 +
> drivers/perf/amlogic/Kconfig | 10 +
> drivers/perf/amlogic/Makefile | 5 +
> drivers/perf/amlogic/aml_ddr_pmu_core.c | 551 ++++++++++++++++++++++++
> drivers/perf/amlogic/aml_ddr_pmu_g12.c | 388 +++++++++++++++++
> include/soc/amlogic/aml_ddr_pmu.h | 76 ++++
> 8 files changed, 1040 insertions(+)
> create mode 100644 drivers/perf/amlogic/Kconfig
> create mode 100644 drivers/perf/amlogic/Makefile
> create mode 100644 drivers/perf/amlogic/aml_ddr_pmu_core.c
> create mode 100644 drivers/perf/amlogic/aml_ddr_pmu_g12.c
> create mode 100644 include/soc/amlogic/aml_ddr_pmu.h
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index f679152bdbad..cb6ee59a4f44 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -1050,6 +1050,13 @@ S: Maintained
> F: Documentation/hid/amd-sfh*
> F: drivers/hid/amd-sfh-hid/
>
> +AMLOGIC DDR PMU DRIVER
> +M: Jiucheng Xu <jiucheng.xu@xxxxxxxxxxx>
> +S: Supported
> +W: http://www.amlogic.com
> +F: drivers/perf/amlogic/
> +F: include/soc/amlogic/
> +
> AMPHION VPU CODEC V4L2 DRIVER
> M: Ming Qian <ming.qian@xxxxxxx>
> M: Shijie Qin <shijie.qin@xxxxxxx>
> diff --git a/drivers/perf/Kconfig b/drivers/perf/Kconfig
> index 1e2d69453771..68200c798128 100644
> --- a/drivers/perf/Kconfig
> +++ b/drivers/perf/Kconfig
> @@ -192,4 +192,6 @@ config MARVELL_CN10K_DDR_PMU
> Enable perf support for Marvell DDR Performance monitoring
> event on CN10K platform.
>
> +source "drivers/perf/amlogic/Kconfig"
> +
> endmenu
> diff --git a/drivers/perf/Makefile b/drivers/perf/Makefile
> index 57a279c61df5..ef82b27e36d0 100644
> --- a/drivers/perf/Makefile
> +++ b/drivers/perf/Makefile
> @@ -1,4 +1,5 @@
> # SPDX-License-Identifier: GPL-2.0
> +obj-$(CONFIG_AML_DDR_PMU) += amlogic/

Upstream kernel Amlogic drivers normally use MESON naming, so the
config item would be e.g. CONFIG_MESON_DDR_PMU.

> obj-$(CONFIG_ARM_CCI_PMU) += arm-cci.o
> obj-$(CONFIG_ARM_CCN) += arm-ccn.o
> obj-$(CONFIG_ARM_CMN) += arm-cmn.o
> diff --git a/drivers/perf/amlogic/Kconfig b/drivers/perf/amlogic/Kconfig
> new file mode 100644
> index 000000000000..0e421c15c8c7
> --- /dev/null
> +++ b/drivers/perf/amlogic/Kconfig
> @@ -0,0 +1,10 @@
> +# SPDX-License-Identifier: GPL-2.0-only
> +config AML_DDR_PMU
> + tristate "Amlogic DDR Bandwidth Performance Monitor"
> + depends on ARCH_MESON || COMPILE_TEST
> + help
> + Provides support for the DDR performance monitor
> + in Amlogic SoCs, which can give information about
> + memory throughput and other related events. It
> + supports multiple channels to monitor the memory
> + bandwidth simultaneously.
> diff --git a/drivers/perf/amlogic/Makefile b/drivers/perf/amlogic/Makefile
> new file mode 100644
> index 000000000000..874b885aa5cc
> --- /dev/null
> +++ b/drivers/perf/amlogic/Makefile
> @@ -0,0 +1,5 @@
> +# SPDX-License-Identifier: GPL-2.0-only
> +
> +obj-$(CONFIG_AML_DDR_PMU) += aml_ddr_pmu.o
> +
> +aml_ddr_pmu-y := aml_ddr_pmu_core.o aml_ddr_pmu_g12.o

I would similarly expect to see meson_ filenames to reflect the
MESON driver name, e.g. meson_ddr_pmu

> diff --git a/drivers/perf/amlogic/aml_ddr_pmu_core.c b/drivers/perf/amlogic/aml_ddr_pmu_core.c
> new file mode 100644
> index 000000000000..4e2f7f0d9af7
> --- /dev/null
> +++ b/drivers/perf/amlogic/aml_ddr_pmu_core.c
> @@ -0,0 +1,551 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (c) 2022 Amlogic, Inc. All rights reserved.
> + */
> +#include <linux/bitfield.h>
> +#include <linux/init.h>
> +#include <linux/irqreturn.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_irq.h>
> +#include <linux/perf_event.h>
> +#include <linux/platform_device.h>
> +#include <linux/printk.h>
> +#include <linux/sysfs.h>
> +#include <linux/types.h>
> +#include <linux/version.h>
> +
> +#include <soc/amlogic/aml_ddr_pmu.h>
> +
> +#define DDR_PERF_DEV_NAME "aml_ddr_bw"
> +#define MAX_AXI_PORTS_OF_CHANNEL 4 /* A DMC channel can monitor max 4 axi ports */
> +
> +#define to_ddr_pmu(p) container_of(p, struct ddr_pmu, pmu)
> +
> +#define hw_info_to_pmu(p) container_of(p, struct ddr_pmu, info)
> +
> +static void dmc_pmu_enable(struct ddr_pmu *pmu)
> +{
> + if (!pmu->pmu_enabled)
> + pmu->info.ops->enable(&pmu->info);
> +
> + pmu->pmu_enabled = true;
> +}
> +
> +static void dmc_pmu_disable(struct ddr_pmu *pmu)
> +{
> + if (pmu->pmu_enabled)
> + pmu->info.ops->disable(&pmu->info);
> +
> + pmu->pmu_enabled = false;
> +}
> +
> +static void aml_ddr_config_axi_id(struct ddr_pmu *pmu, int axi_id, int chann)

And I would similarly expect to see meson_ structures to reflect
the MESON driver name, e.g. meson_ddr_config_axi_id

> +{
> + pmu->info.ops->config_axi_id(&pmu->info, axi_id, chann);
> +}
> +
> +static void aml_ddr_set_filter(struct perf_event *event, u8 axi_id)
> +{
> + struct ddr_pmu *pmu = to_ddr_pmu(event->pmu);
> + int chann;
> +
> + if (event->attr.config > ALL_CHAN_COUNTER_ID &&
> + event->attr.config < COUNTER_MAX_ID) {
> + chann = event->attr.config - CHAN1_COUNTER_ID;
> +
> + aml_ddr_config_axi_id(pmu, axi_id, chann);
> + }
> +}
> +
> +static void ddr_cnt_addition(struct dmc_counter *sum,
> + struct dmc_counter *add1,
> + struct dmc_counter *add2,
> + int chann_nr)
> +{
> + int i;
> + u64 cnt1, cnt2;
> +
> + sum->all_cnt = add1->all_cnt + add2->all_cnt;
> + sum->all_req = add1->all_req + add2->all_req;
> + for (i = 0; i < chann_nr; i++) {
> + cnt1 = add1->channel_cnt[i];
> + cnt2 = add2->channel_cnt[i];
> +
> + sum->channel_cnt[i] = cnt1 + cnt2;
> + }
> +}
> +
> +static void aml_ddr_perf_event_update(struct perf_event *event)
> +{
> + struct ddr_pmu *pmu = to_ddr_pmu(event->pmu);
> + u64 new_raw_count = 0;
> + struct dmc_counter dc = {0}, sum_dc = {0};
> + int idx;
> +
> + /* get the remain counters in register. */
> + pmu->info.ops->get_counters(&pmu->info, &dc);
> +
> + ddr_cnt_addition(&sum_dc, &pmu->counters, &dc, pmu->info.chann_nr);
> +
> + switch (event->attr.config) {
> + case ALL_CHAN_COUNTER_ID:
> + new_raw_count = sum_dc.all_cnt;
> + break;
> + case CHAN1_COUNTER_ID:
> + case CHAN2_COUNTER_ID:
> + case CHAN3_COUNTER_ID:
> + case CHAN4_COUNTER_ID:
> + case CHAN5_COUNTER_ID:
> + case CHAN6_COUNTER_ID:
> + case CHAN7_COUNTER_ID:
> + case CHAN8_COUNTER_ID:
> + idx = event->attr.config - CHAN1_COUNTER_ID;
> + new_raw_count = sum_dc.channel_cnt[idx];
> + break;
> + }
> +
> + local64_set(&event->count, new_raw_count);
> +}
> +
> +static int aml_ddr_perf_event_init(struct perf_event *event)
> +{
> + struct ddr_pmu *pmu = to_ddr_pmu(event->pmu);
> + u64 config1 = event->attr.config1;
> +
> + if (event->attr.type != event->pmu->type)
> + return -ENOENT;
> +
> + if (is_sampling_event(event) || event->attach_state & PERF_ATTACH_TASK)
> + return -EOPNOTSUPP;
> +
> + if (event->cpu < 0)
> + return -EOPNOTSUPP;
> +
> + /* check if the number of parameters is too much */
> + if (event->attr.config != ALL_CHAN_COUNTER_ID &&
> + hweight64(config1) > MAX_AXI_PORTS_OF_CHANNEL)
> + return -EOPNOTSUPP;
> +
> + event->cpu = pmu->cpu;
> +
> + return 0;
> +}
> +
> +static void aml_ddr_perf_event_start(struct perf_event *event, int flags)
> +{
> + struct ddr_pmu *pmu = to_ddr_pmu(event->pmu);
> +
> + memset(&pmu->counters, 0, sizeof(pmu->counters));
> + dmc_pmu_enable(pmu);
> +}
> +
> +static int aml_ddr_perf_event_add(struct perf_event *event, int flags)
> +{
> + u64 config1 = event->attr.config1;
> + int i;
> +
> + for_each_set_bit(i, (const unsigned long *)&config1, sizeof(config1))
> + aml_ddr_set_filter(event, i);
> +
> + if (flags & PERF_EF_START)
> + aml_ddr_perf_event_start(event, flags);
> +
> + return 0;
> +}
> +
> +static void aml_ddr_perf_event_stop(struct perf_event *event, int flags)
> +{
> + struct ddr_pmu *pmu = to_ddr_pmu(event->pmu);
> +
> + if (flags & PERF_EF_UPDATE)
> + aml_ddr_perf_event_update(event);
> +
> + dmc_pmu_disable(pmu);
> +}
> +
> +static void aml_ddr_perf_event_del(struct perf_event *event, int flags)
> +{
> + aml_ddr_perf_event_stop(event, PERF_EF_UPDATE);
> +}
> +
> +static ssize_t aml_ddr_perf_cpumask_show(struct device *dev,
> + struct device_attribute *attr,
> + char *buf)
> +{
> + struct ddr_pmu *pmu = dev_get_drvdata(dev);
> +
> + return cpumap_print_to_pagebuf(true, buf, cpumask_of(pmu->cpu));
> +}
> +
> +static struct device_attribute aml_ddr_perf_cpumask_attr =
> +__ATTR(cpumask, 0444, aml_ddr_perf_cpumask_show, NULL);
> +
> +static struct attribute *aml_ddr_perf_cpumask_attrs[] = {
> + &aml_ddr_perf_cpumask_attr.attr,
> + NULL,
> +};
> +
> +static const struct attribute_group ddr_perf_cpumask_attr_group = {
> + .attrs = aml_ddr_perf_cpumask_attrs,
> +};
> +
> +static ssize_t
> +pmu_event_show(struct device *dev, struct device_attribute *attr,
> + char *page)
> +{
> + struct perf_pmu_events_attr *pmu_attr;
> +
> + pmu_attr = container_of(attr, struct perf_pmu_events_attr, attr);
> + return sysfs_emit(page, "event=0x%02llx\n", pmu_attr->id);
> +}
> +
> +static ssize_t
> +event_show_unit(struct device *dev, struct device_attribute *attr,
> + char *page)
> +{
> + struct perf_pmu_events_attr *pmu_attr;
> +
> + pmu_attr = container_of(attr, struct perf_pmu_events_attr, attr);
> + return sysfs_emit(page, "MB\n");
> +}
> +
> +static ssize_t
> +event_show_scale(struct device *dev, struct device_attribute *attr,
> + char *page)
> +{
> + struct perf_pmu_events_attr *pmu_attr;
> +
> + pmu_attr = container_of(attr, struct perf_pmu_events_attr, attr);
> +
> + /* one count = 16byte = 1.52587890625e-05 MB */
> + return sysfs_emit(page, "1.52587890625e-05\n");
> +}
> +
> +#define AML_DDR_PMU_EVENT_ATTR(_name, _id) \
> +{ \
> + .attr = __ATTR(_name, 0444, pmu_event_show, NULL), \
> + .id = _id, \
> +}
> +
> +#define AML_DDR_PMU_EVENT_UNIT_ATTR(_name) \
> + __ATTR(_name.unit, 0444, event_show_unit, NULL)
> +
> +#define AML_DDR_PMU_EVENT_SCALE_ATTR(_name) \
> + __ATTR(_name.scale, 0444, event_show_scale, NULL)
> +
> +static struct device_attribute event_unit_attrs[] = {
> + AML_DDR_PMU_EVENT_UNIT_ATTR(total_rw_bytes),
> + AML_DDR_PMU_EVENT_UNIT_ATTR(chan_1_rw_bytes),
> + AML_DDR_PMU_EVENT_UNIT_ATTR(chan_2_rw_bytes),
> + AML_DDR_PMU_EVENT_UNIT_ATTR(chan_3_rw_bytes),
> + AML_DDR_PMU_EVENT_UNIT_ATTR(chan_4_rw_bytes),
> + AML_DDR_PMU_EVENT_UNIT_ATTR(chan_5_rw_bytes),
> + AML_DDR_PMU_EVENT_UNIT_ATTR(chan_6_rw_bytes),
> + AML_DDR_PMU_EVENT_UNIT_ATTR(chan_7_rw_bytes),
> + AML_DDR_PMU_EVENT_UNIT_ATTR(chan_8_rw_bytes),
> +};
> +
> +static struct device_attribute event_scale_attrs[] = {
> + AML_DDR_PMU_EVENT_SCALE_ATTR(total_rw_bytes),
> + AML_DDR_PMU_EVENT_SCALE_ATTR(chan_1_rw_bytes),
> + AML_DDR_PMU_EVENT_SCALE_ATTR(chan_2_rw_bytes),
> + AML_DDR_PMU_EVENT_SCALE_ATTR(chan_3_rw_bytes),
> + AML_DDR_PMU_EVENT_SCALE_ATTR(chan_4_rw_bytes),
> + AML_DDR_PMU_EVENT_SCALE_ATTR(chan_5_rw_bytes),
> + AML_DDR_PMU_EVENT_SCALE_ATTR(chan_6_rw_bytes),
> + AML_DDR_PMU_EVENT_SCALE_ATTR(chan_7_rw_bytes),
> + AML_DDR_PMU_EVENT_SCALE_ATTR(chan_8_rw_bytes),
> +};
> +
> +static struct perf_pmu_events_attr event_attrs[] = {
> + AML_DDR_PMU_EVENT_ATTR(total_rw_bytes, ALL_CHAN_COUNTER_ID),
> + AML_DDR_PMU_EVENT_ATTR(chan_1_rw_bytes, CHAN1_COUNTER_ID),
> + AML_DDR_PMU_EVENT_ATTR(chan_2_rw_bytes, CHAN2_COUNTER_ID),
> + AML_DDR_PMU_EVENT_ATTR(chan_3_rw_bytes, CHAN3_COUNTER_ID),
> + AML_DDR_PMU_EVENT_ATTR(chan_4_rw_bytes, CHAN4_COUNTER_ID),
> + AML_DDR_PMU_EVENT_ATTR(chan_5_rw_bytes, CHAN5_COUNTER_ID),
> + AML_DDR_PMU_EVENT_ATTR(chan_6_rw_bytes, CHAN6_COUNTER_ID),
> + AML_DDR_PMU_EVENT_ATTR(chan_7_rw_bytes, CHAN7_COUNTER_ID),
> + AML_DDR_PMU_EVENT_ATTR(chan_8_rw_bytes, CHAN8_COUNTER_ID),
> +};
> +
> +/* three attrs are combined an event */
> +static struct attribute *ddr_perf_events_attrs[COUNTER_MAX_ID * 3];
> +
> +static struct attribute_group ddr_perf_events_attr_group = {
> + .name = "events",
> + .attrs = ddr_perf_events_attrs,
> +};
> +
> +/* an attr represents axi id, the max id is less than 256 */
> +static struct attribute *ddr_perf_format_attrs[256];
> +
> +static umode_t aml_ddr_perf_format_attr_visible(struct kobject *kobj,
> + struct attribute *attr,
> + int n)
> +{
> + return attr->mode;
> +}
> +
> +static struct attribute_group ddr_perf_format_attr_group = {
> + .name = "format",
> + .attrs = ddr_perf_format_attrs,
> + .is_visible = aml_ddr_perf_format_attr_visible,
> +};
> +
> +static ssize_t aml_ddr_perf_identifier_show(struct device *dev,
> + struct device_attribute *attr,
> + char *page)
> +{
> + struct ddr_pmu *pmu = dev_get_drvdata(dev);
> +
> + return sysfs_emit(page, "%s\n", pmu->name);
> +}
> +
> +static struct device_attribute aml_ddr_perf_identifier_attr =
> +__ATTR(identifier, 0444, aml_ddr_perf_identifier_show, NULL);
> +
> +static struct attribute *aml_ddr_perf_identifier_attrs[] = {
> + &aml_ddr_perf_identifier_attr.attr,
> + NULL,
> +};
> +
> +static const struct attribute_group ddr_perf_identifier_attr_group = {
> + .attrs = aml_ddr_perf_identifier_attrs,
> +};
> +
> +static const struct attribute_group *attr_groups[] = {
> + &ddr_perf_events_attr_group,
> + &ddr_perf_format_attr_group,
> + &ddr_perf_cpumask_attr_group,
> + &ddr_perf_identifier_attr_group,
> + NULL,
> +};
> +
> +static irqreturn_t dmc_irq_handler(int irq, void *dev_id)
> +{
> + struct dmc_hw_info *info = dev_id;
> + struct ddr_pmu *pmu;
> + struct dmc_counter counters, *sum_cnter;
> + int i;
> +
> + pmu = hw_info_to_pmu(info);
> +
> + if (info->ops->irq_handler(info, &counters) != 0)
> + goto out;
> +
> + sum_cnter = &pmu->counters;
> + sum_cnter->all_cnt += counters.all_cnt;
> + sum_cnter->all_req += counters.all_req;
> +
> + for (i = 0; i < pmu->info.chann_nr; i++)
> + sum_cnter->channel_cnt[i] += counters.channel_cnt[i];
> +
> + if (pmu->pmu_enabled)
> + /*
> + * the timer interrupt only supprt
> + * one shot mode, we have to re-enable
> + * it in ISR to support continue mode.
> + */
> + info->ops->enable(info);
> +
> + dev_dbg(pmu->dev, "counts: %llu %llu %llu, %llu, %llu, %llu\t\t"
> + "sum: %llu %llu %llu, %llu, %llu, %llu\n",
> + counters.all_req,
> + counters.all_cnt,
> + counters.channel_cnt[0],
> + counters.channel_cnt[1],
> + counters.channel_cnt[2],
> + counters.channel_cnt[3],
> +
> + pmu->counters.all_req,
> + pmu->counters.all_cnt,
> + pmu->counters.channel_cnt[0],
> + pmu->counters.channel_cnt[1],
> + pmu->counters.channel_cnt[2],
> + pmu->counters.channel_cnt[3]);
> +out:
> + return IRQ_HANDLED;
> +}
> +
> +static int ddr_perf_offline_cpu(unsigned int cpu, struct hlist_node *node)
> +{
> + struct ddr_pmu *pmu = hlist_entry_safe(node, struct ddr_pmu, node);
> + int target;
> +
> + if (cpu != pmu->cpu)
> + return 0;
> +
> + target = cpumask_any_but(cpu_online_mask, cpu);
> + if (target >= nr_cpu_ids)
> + return 0;
> +
> + perf_pmu_migrate_context(&pmu->pmu, cpu, target);
> + pmu->cpu = target;
> +
> + WARN_ON(irq_set_affinity(pmu->info.irq_num, cpumask_of(pmu->cpu)));
> +
> + return 0;
> +}
> +
> +static void fill_event_attr(struct ddr_pmu *pmu)
> +{
> + int i, j, k;
> + struct attribute **dst = ddr_perf_events_attrs;
> +
> + j = 0;
> + k = 0;
> +
> + /* fill ALL_CHAN_COUNTER_ID event */
> + dst[j++] = &event_attrs[k].attr.attr;
> + dst[j++] = &event_unit_attrs[k].attr;
> + dst[j++] = &event_scale_attrs[k].attr;
> +
> + k++;
> +
> + /* fill each channel event */
> + for (i = 0; i < pmu->info.chann_nr; i++, k++) {
> + dst[j++] = &event_attrs[k].attr.attr;
> + dst[j++] = &event_unit_attrs[k].attr;
> + dst[j++] = &event_scale_attrs[k].attr;
> + }
> +
> + dst[j] = NULL; /* mark end */
> +}
> +
> +static void fmt_attr_fill(struct attribute **fmt_attr)
> +{
> + int i;
> +
> + for (i = 0; fmt_attr[i]; i++)
> + ddr_perf_format_attrs[i] = fmt_attr[i];
> +
> + ddr_perf_format_attrs[i] = NULL;
> +}
> +
> +static int ddr_pmu_parse_dt(struct platform_device *pdev, struct dmc_hw_info *info)
> +{
> + /*struct pinctrl *p;*/
> + void __iomem *base;
> + int i, ret = -EINVAL;
> +
> + for (i = 0; i < info->dmc_nr; i++) {
> + /* resource 0 for ddr register base */
> + base = devm_platform_ioremap_resource(pdev, i);
> + if (IS_ERR(base)) {
> + dev_err(&pdev->dev, "couldn't ioremap ddr reg %d\n", i);
> + return PTR_ERR(base);
> + }
> + info->ddr_reg[i] = base;
> + }
> +
> + /* resource i for pll register base */
> + base = devm_platform_ioremap_resource(pdev, i);
> + if (IS_ERR(base)) {
> + dev_err(&pdev->dev, "couldn't ioremap for pll reg\n");
> + return PTR_ERR(base);
> + }
> + info->pll_reg = base;
> +
> + ret = platform_get_irq(pdev, 0);
> + if (ret < 0) {
> + dev_err(&pdev->dev, "couldn't get irq\n");
> + return ret;
> + }
> + info->irq_num = ret;
> +
> + ret = devm_request_irq(&pdev->dev, info->irq_num, dmc_irq_handler,
> + IRQF_NOBALANCING, dev_name(&pdev->dev),
> + (void *)info);
> + if (ret < 0)
> + dev_err(&pdev->dev, "ddr request irq failed\n");
> +
> + return ret;
> +}
> +
> +int aml_ddr_pmu_create(struct platform_device *pdev, struct ddr_pmu *pmu)
> +{
> + int ret;
> + char *name;
> + struct pmu tmp_pmu = {
> + .module = THIS_MODULE,
> + .capabilities = PERF_PMU_CAP_NO_EXCLUDE,
> + .task_ctx_nr = perf_invalid_context,
> + .attr_groups = attr_groups,
> + .event_init = aml_ddr_perf_event_init,
> + .add = aml_ddr_perf_event_add,
> + .del = aml_ddr_perf_event_del,
> + .start = aml_ddr_perf_event_start,
> + .stop = aml_ddr_perf_event_stop,
> + .read = aml_ddr_perf_event_update,
> + };
> +
> + pmu->pmu = tmp_pmu;
> +
> + ret = ddr_pmu_parse_dt(pdev, &pmu->info);
> + if (ret < 0)
> + return ret;
> +
> + fmt_attr_fill(pmu->info.fmt_attr);
> +
> + pmu->cpu = raw_smp_processor_id();
> +
> + name = devm_kasprintf(&pdev->dev, GFP_KERNEL, DDR_PERF_DEV_NAME);
> + if (!name) {
> + dev_err(&pdev->dev, "couldn't allocat name\n");
> + return -ENOMEM;
> + }
> +
> + ret = cpuhp_setup_state_multi(CPUHP_AP_ONLINE_DYN, name, NULL,
> + ddr_perf_offline_cpu);
> + if (ret < 0) {
> + dev_err(&pdev->dev, "cpuhp_setup_state_multi failed\n");
> + return ret;
> + }
> + pmu->cpuhp_state = ret;
> +
> + /* Register the pmu instance for cpu hotplug */
> + ret = cpuhp_state_add_instance_nocalls(pmu->cpuhp_state, &pmu->node);
> + if (ret) {
> + dev_err(&pdev->dev, "Error %d registering hotplug\n", ret);
> + goto cpuhp_instance_err;
> + }
> +
> + fill_event_attr(pmu);
> +
> + ret = perf_pmu_register(&pmu->pmu, name, -1);
> + if (ret) {
> + dev_err(&pdev->dev, "perf pmu register failed\n");
> + goto pmu_register_err;
> + }
> +
> + pmu->name = name;
> + pmu->dev = &pdev->dev;
> + pmu->pmu_enabled = false;
> +
> + platform_set_drvdata(pdev, pmu);
> +
> + return 0;
> +
> +pmu_register_err:
> + cpuhp_state_remove_instance_nocalls(pmu->cpuhp_state, &pmu->node);
> +cpuhp_instance_err:
> + cpuhp_remove_state(pmu->cpuhp_state);
> +
> + return ret;
> +}
> +EXPORT_SYMBOL(aml_ddr_pmu_create);
> +
> +int aml_ddr_pmu_remove(struct platform_device *pdev)
> +{
> + struct ddr_pmu *pmu = platform_get_drvdata(pdev);
> +
> + perf_pmu_unregister(&pmu->pmu);
> + cpuhp_state_remove_instance_nocalls(pmu->cpuhp_state, &pmu->node);
> + cpuhp_remove_state(pmu->cpuhp_state);
> +
> + return 0;
> +}
> +EXPORT_SYMBOL(aml_ddr_pmu_remove);
> diff --git a/drivers/perf/amlogic/aml_ddr_pmu_g12.c b/drivers/perf/amlogic/aml_ddr_pmu_g12.c
> new file mode 100644
> index 000000000000..e98acdc72797
> --- /dev/null
> +++ b/drivers/perf/amlogic/aml_ddr_pmu_g12.c
> @@ -0,0 +1,388 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (c) 2022 Amlogic, Inc. All rights reserved.
> + */
> +#include <linux/err.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/perf_event.h>
> +#include <linux/platform_device.h>
> +#include <linux/printk.h>
> +#include <linux/types.h>
> +#include <linux/version.h>
> +
> +#include <soc/amlogic/aml_ddr_pmu.h>
> +
> +#define PORT_MAJOR 32
> +#define DEFAULT_XTAL_FREQ 24000000UL
> +
> +#define DMC_QOS_IRQ BIT(30)
> +
> +/* DMC bandwidth monitor register address offset */
> +#define DMC_MON_G12_CTRL0 (0x20 << 2)
> +#define DMC_MON_G12_CTRL1 (0x21 << 2)
> +#define DMC_MON_G12_CTRL2 (0x22 << 2)
> +#define DMC_MON_G12_CTRL3 (0x23 << 2)
> +#define DMC_MON_G12_CTRL4 (0x24 << 2)
> +#define DMC_MON_G12_CTRL5 (0x25 << 2)
> +#define DMC_MON_G12_CTRL6 (0x26 << 2)
> +#define DMC_MON_G12_CTRL7 (0x27 << 2)
> +#define DMC_MON_G12_CTRL8 (0x28 << 2)
> +
> +#define DMC_MON_G12_ALL_REQ_CNT (0x29 << 2)
> +#define DMC_MON_G12_ALL_GRANT_CNT (0x2a << 2)
> +#define DMC_MON_G12_ONE_GRANT_CNT (0x2b << 2)
> +#define DMC_MON_G12_SEC_GRANT_CNT (0x2c << 2)
> +#define DMC_MON_G12_THD_GRANT_CNT (0x2d << 2)
> +#define DMC_MON_G12_FOR_GRANT_CNT (0x2e << 2)
> +#define DMC_MON_G12_TIMER (0x2f << 2)
> +
> +/* Each bit represent a axi line */
> +PMU_FORMAT_ATTR(event, "config:0-7");
> +PMU_FORMAT_ATTR(arm, "config1:0");
> +PMU_FORMAT_ATTR(gpu, "config1:1");
> +PMU_FORMAT_ATTR(pcie, "config1:2");
> +PMU_FORMAT_ATTR(hdcp, "config1:3");
> +PMU_FORMAT_ATTR(hevc_front, "config1:4");
> +PMU_FORMAT_ATTR(usb3_0, "config1:6");
> +PMU_FORMAT_ATTR(device, "config1:7");
> +PMU_FORMAT_ATTR(hevc_back, "config1:8");
> +PMU_FORMAT_ATTR(h265enc, "config1:9");
> +PMU_FORMAT_ATTR(vpu_read1, "config1:16");
> +PMU_FORMAT_ATTR(vpu_read2, "config1:17");
> +PMU_FORMAT_ATTR(vpu_read3, "config1:18");
> +PMU_FORMAT_ATTR(vpu_write1, "config1:19");
> +PMU_FORMAT_ATTR(vpu_write2, "config1:20");
> +PMU_FORMAT_ATTR(vdec, "config1:21");
> +PMU_FORMAT_ATTR(hcodec, "config1:22");
> +PMU_FORMAT_ATTR(ge2d, "config1:23");
> +
> +PMU_FORMAT_ATTR(spicc1, "config1:32");
> +PMU_FORMAT_ATTR(usb0, "config1:33");
> +PMU_FORMAT_ATTR(dma, "config1:34");
> +PMU_FORMAT_ATTR(arb0, "config1:35");
> +PMU_FORMAT_ATTR(sd_emmc_b, "config1:36");
> +PMU_FORMAT_ATTR(usb1, "config1:37");
> +PMU_FORMAT_ATTR(audio, "config1:38");
> +PMU_FORMAT_ATTR(aififo, "config1:39");
> +PMU_FORMAT_ATTR(parser, "config1:41");
> +PMU_FORMAT_ATTR(ao_cpu, "config1:42");
> +PMU_FORMAT_ATTR(sd_emmc_c, "config1:43");
> +PMU_FORMAT_ATTR(spicc2, "config1:44");
> +PMU_FORMAT_ATTR(ethernet, "config1:45");
> +PMU_FORMAT_ATTR(sana, "config1:46");
> +
> +/* for sm1 and g12b */
> +PMU_FORMAT_ATTR(nna, "config1:10");
> +
> +/* for g12b only */
> +PMU_FORMAT_ATTR(gdc, "config1:11");
> +PMU_FORMAT_ATTR(mipi_isp, "config1:12");
> +PMU_FORMAT_ATTR(arm1, "config1:13");
> +PMU_FORMAT_ATTR(sd_emmc_a, "config1:40");
> +
> +static struct attribute *g12_pmu_format_attrs[] = {
> + &format_attr_event.attr,
> + &format_attr_arm.attr,
> + &format_attr_gpu.attr,
> + &format_attr_nna.attr,
> + &format_attr_gdc.attr,
> + &format_attr_arm1.attr,
> + &format_attr_mipi_isp.attr,
> + &format_attr_sd_emmc_a.attr,
> + &format_attr_pcie.attr,
> + &format_attr_hdcp.attr,
> + &format_attr_hevc_front.attr,
> + &format_attr_usb3_0.attr,
> + &format_attr_device.attr,
> + &format_attr_hevc_back.attr,
> + &format_attr_h265enc.attr,
> + &format_attr_vpu_read1.attr,
> + &format_attr_vpu_read2.attr,
> + &format_attr_vpu_read3.attr,
> + &format_attr_vpu_write1.attr,
> + &format_attr_vpu_write2.attr,
> + &format_attr_vdec.attr,
> + &format_attr_hcodec.attr,
> + &format_attr_ge2d.attr,
> + &format_attr_spicc1.attr,
> + &format_attr_usb0.attr,
> + &format_attr_dma.attr,
> + &format_attr_arb0.attr,
> + &format_attr_sd_emmc_b.attr,
> + &format_attr_usb1.attr,
> + &format_attr_audio.attr,
> + &format_attr_aififo.attr,
> + &format_attr_parser.attr,
> + &format_attr_ao_cpu.attr,
> + &format_attr_sd_emmc_c.attr,
> + &format_attr_spicc2.attr,
> + &format_attr_ethernet.attr,
> + &format_attr_sana.attr,
> + NULL,
> +};
> +
> +/* calculate ddr clock */
> +static unsigned long dmc_g12_get_freq_quick(struct dmc_hw_info *info)
> +{
> + unsigned int val;
> + unsigned int n, m, od1;
> + unsigned int od_div = 0xfff;
> + unsigned long freq = 0;
> +
> + val = readl(info->pll_reg);
> + val = val & 0xfffff;
> + switch ((val >> 16) & 7) {
> + case 0:
> + od_div = 2;
> + break;
> +
> + case 1:
> + od_div = 3;
> + break;
> +
> + case 2:
> + od_div = 4;
> + break;
> +
> + case 3:
> + od_div = 6;
> + break;
> +
> + case 4:
> + od_div = 8;
> + break;
> +
> + default:
> + break;
> + }
> +
> + m = val & 0x1ff;
> + n = ((val >> 10) & 0x1f);
> + od1 = (((val >> 19) & 0x1)) == 1 ? 2 : 1;
> + freq = DEFAULT_XTAL_FREQ / 1000; /* avoid overflow */
> + if (n)
> + freq = ((((freq * m) / n) >> od1) / od_div) * 1000;
> +
> + return freq;
> +}
> +
> +#ifdef DEBUG
> +static void g12_dump_reg(struct dmc_hw_info *db)
> +{
> + int s = 0, i;
> + unsigned int r;
> +
> + for (i = 0; i < 9; i++) {
> + r = readl(db->ddr_reg[0] + (DMC_MON_G12_CTRL0 + (i << 2)));
> + pr_notice("DMC_MON_CTRL%d: %08x\n", i, r);
> + }
> + r = readl(db->ddr_reg[0] + DMC_MON_G12_ALL_REQ_CNT);
> + pr_notice("DMC_MON_ALL_REQ_CNT: %08x\n", r);
> + r = readl(db->ddr_reg[0] + DMC_MON_G12_ALL_GRANT_CNT);
> + pr_notice("DMC_MON_ALL_GRANT_CNT:%08x\n", r);
> + r = readl(db->ddr_reg[0] + DMC_MON_G12_ONE_GRANT_CNT);
> + pr_notice("DMC_MON_ONE_GRANT_CNT:%08x\n", r);
> + r = readl(db->ddr_reg[0] + DMC_MON_G12_SEC_GRANT_CNT);
> + pr_notice("DMC_MON_SEC_GRANT_CNT:%08x\n", r);
> + r = readl(db->ddr_reg[0] + DMC_MON_G12_THD_GRANT_CNT);
> + pr_notice("DMC_MON_THD_GRANT_CNT:%08x\n", r);
> + r = readl(db->ddr_reg[0] + DMC_MON_G12_FOR_GRANT_CNT);
> + pr_notice("DMC_MON_FOR_GRANT_CNT:%08x\n", r);
> + r = readl(db->ddr_reg[0] + DMC_MON_G12_TIMER);
> + pr_notice("DMC_MON_TIMER: %08x\n", r);
> +}
> +#endif
> +
> +static void dmc_g12_counter_enable(struct dmc_hw_info *info)
> +{
> + unsigned int val;
> + unsigned long clock_count = dmc_g12_get_freq_quick(info) / 10; /* 100ms */
> +
> + writel(clock_count, info->ddr_reg[0] + DMC_MON_G12_TIMER);
> +
> + val = readl(info->ddr_reg[0] + DMC_MON_G12_CTRL0);
> +
> + /* enable all channel */
> + val = BIT(31) | /* enable bit */
> + BIT(20) | /* use timer */
> + 0x0f; /* 4 channels */
> +
> + writel(val, info->ddr_reg[0] + DMC_MON_G12_CTRL0);
> +
> +#ifdef DEBUG
> + g12_dump_reg(info);
> +#endif
> +}
> +
> +static void dmc_g12_config_fiter(struct dmc_hw_info *info,
> + int port, int channel)
> +{
> + u32 val;
> + u32 rp[MAX_CHANNEL_NUM] = {DMC_MON_G12_CTRL1, DMC_MON_G12_CTRL3,
> + DMC_MON_G12_CTRL5, DMC_MON_G12_CTRL7};
> + u32 rs[MAX_CHANNEL_NUM] = {DMC_MON_G12_CTRL2, DMC_MON_G12_CTRL4,
> + DMC_MON_G12_CTRL6, DMC_MON_G12_CTRL8};
> + int subport = -1;
> +
> + /* clear all port mask */
> + if (port < 0) {
> + writel(0, info->ddr_reg[0] + rp[channel]);
> + writel(0, info->ddr_reg[0] + rs[channel]);
> + return;
> + }
> +
> + if (port >= PORT_MAJOR)
> + subport = port - PORT_MAJOR;
> +
> + if (subport < 0) {
> + val = readl(info->ddr_reg[0] + rp[channel]);
> + val |= (1 << port);
> + writel(val, info->ddr_reg[0] + rp[channel]);
> + val = 0xffff;
> + writel(val, info->ddr_reg[0] + rs[channel]);
> + } else {
> + val = BIT(23); /* select device */
> + writel(val, info->ddr_reg[0] + rp[channel]);
> + val = readl(info->ddr_reg[0] + rs[channel]);
> + val |= (1 << subport);
> + writel(val, info->ddr_reg[0] + rs[channel]);
> + }
> +}
> +
> +static void dmc_g12_config_axi_id(struct dmc_hw_info *info, int axi_id, int channel)
> +{
> + if (channel > info->chann_nr)
> + return;
> +
> + dmc_g12_config_fiter(info, axi_id, channel);
> +}
> +
> +static void dmc_g12_counter_disable(struct dmc_hw_info *info)
> +{
> + int i;
> +
> + /* clear timer */
> + writel(0, info->ddr_reg[0] + DMC_MON_G12_CTRL0);
> + writel(0, info->ddr_reg[0] + DMC_MON_G12_TIMER);
> +
> + writel(0, info->ddr_reg[0] + DMC_MON_G12_ALL_REQ_CNT);
> + writel(0, info->ddr_reg[0] + DMC_MON_G12_ALL_GRANT_CNT);
> + writel(0, info->ddr_reg[0] + DMC_MON_G12_ONE_GRANT_CNT);
> + writel(0, info->ddr_reg[0] + DMC_MON_G12_SEC_GRANT_CNT);
> + writel(0, info->ddr_reg[0] + DMC_MON_G12_THD_GRANT_CNT);
> + writel(0, info->ddr_reg[0] + DMC_MON_G12_FOR_GRANT_CNT);
> +
> + /* clear port channel mapping */
> + for (i = 0; i < info->chann_nr; i++)
> + dmc_g12_config_fiter(info, -1, i);
> +}
> +
> +static void dmc_g12_get_counters(struct dmc_hw_info *info,
> + struct dmc_counter *counter)
> +{
> + int i;
> + unsigned int reg;
> +
> + counter->all_cnt = readl(info->ddr_reg[0] + DMC_MON_G12_ALL_GRANT_CNT);
> + counter->all_req = readl(info->ddr_reg[0] + DMC_MON_G12_ALL_REQ_CNT);
> +
> + for (i = 0; i < info->chann_nr; i++) {
> + reg = DMC_MON_G12_ONE_GRANT_CNT + (i << 2);
> + counter->channel_cnt[i] = readl(info->ddr_reg[0] + reg);
> + }
> +}
> +
> +static int dmc_g12_irq_handler(struct dmc_hw_info *info,
> + struct dmc_counter *counter)
> +{
> + unsigned int val;
> + int ret = -EINVAL;
> +
> + val = readl(info->ddr_reg[0] + DMC_MON_G12_CTRL0);
> + if (val & DMC_QOS_IRQ) {
> + dmc_g12_get_counters(info, counter);
> + /* clear irq flags */
> + writel(val, info->ddr_reg[0] + DMC_MON_G12_CTRL0);
> + ret = 0;
> + }
> + return ret;
> +}
> +
> +static struct dmc_pmu_hw_ops g12_ops = {
> + .enable = dmc_g12_counter_enable,
> + .disable = dmc_g12_counter_disable,
> + .irq_handler = dmc_g12_irq_handler,
> + .get_counters = dmc_g12_get_counters,
> + .config_axi_id = dmc_g12_config_axi_id,
> +};
> +
> +static int __init g12_ddr_pmu_probe(struct platform_device *pdev)
> +{
> + struct ddr_pmu *pmu;
> +
> + if (of_device_is_compatible(pdev->dev.of_node,
> + "amlogic,g12a-ddr-pmu")) {
> + format_attr_nna.attr.mode = 0;
> + format_attr_gdc.attr.mode = 0;
> + format_attr_arm1.attr.mode = 0;
> + format_attr_mipi_isp.attr.mode = 0;
> + } else if (of_device_is_compatible(pdev->dev.of_node,
> + "amlogic,sm1-ddr-pmu")) {
> + format_attr_gdc.attr.mode = 0;
> + format_attr_arm1.attr.mode = 0;
> + format_attr_mipi_isp.attr.mode = 0;
> + }
> +
> + pmu = devm_kzalloc(&pdev->dev, sizeof(struct ddr_pmu), GFP_KERNEL);
> + if (!pmu)
> + return -ENOMEM;
> +
> + /*
> + * G12 series Soc have single dmc controller and
> + * 4x ddr bandwidth monitor channels
> + */
> + pmu->info.dmc_nr = 1;
> + pmu->info.chann_nr = 4;
> + pmu->info.ops = &g12_ops;
> + pmu->info.fmt_attr = g12_pmu_format_attrs;
> +
> + return aml_ddr_pmu_create(pdev, pmu);
> +}
> +
> +static int __exit g12_ddr_pmu_remove(struct platform_device *pdev)
> +{
> + aml_ddr_pmu_remove(pdev);
> +
> + return 0;
> +}
> +
> +static const struct of_device_id aml_ddr_pmu_dt_match[] = {
> + {
> + .compatible = "amlogic,g12-ddr-pmu",
> + },
> + {
> + .compatible = "amlogic,g12a-ddr-pmu",
> + },
> + {
> + .compatible = "amlogic,g12b-ddr-pmu",
> + },
> + {
> + .compatible = "amlogic,sm1-ddr-pmu",
> + },
> + {}
> +};
> +
> +static struct platform_driver g12_ddr_pmu_driver = {
> + .driver = {
> + .name = "amlogic,ddr-pmu",
> + .of_match_table = aml_ddr_pmu_dt_match,
> + },
> + .remove = __exit_p(g12_ddr_pmu_remove),
> +};
> +
> +module_platform_driver_probe(g12_ddr_pmu_driver, g12_ddr_pmu_probe);
> +MODULE_AUTHOR("Jiucheng Xu");
> +MODULE_LICENSE("GPL");
> +MODULE_DESCRIPTION("Amlogic G12 series SoC DDR PMU");
> diff --git a/include/soc/amlogic/aml_ddr_pmu.h b/include/soc/amlogic/aml_ddr_pmu.h
> new file mode 100644
> index 000000000000..283f5773ecd1
> --- /dev/null
> +++ b/include/soc/amlogic/aml_ddr_pmu.h
> @@ -0,0 +1,76 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * Copyright (c) 2022 Amlogic, Inc. All rights reserved.
> + */
> +
> +#ifndef __AML_DDR_PMU_H__
> +#define __AML_DDR_PMU_H__
> +
> +#define MAX_CHANNEL_NUM 8
> +
> +enum {
> + ALL_CHAN_COUNTER_ID,
> + CHAN1_COUNTER_ID,
> + CHAN2_COUNTER_ID,
> + CHAN3_COUNTER_ID,
> + CHAN4_COUNTER_ID,
> + CHAN5_COUNTER_ID,
> + CHAN6_COUNTER_ID,
> + CHAN7_COUNTER_ID,
> + CHAN8_COUNTER_ID,
> + COUNTER_MAX_ID,
> +};
> +
> +struct dmc_hw_info;
> +
> +struct dmc_counter {
> + u64 all_cnt; /* The count of all requests come in/out ddr controller */
> + union {
> + u64 all_req;
> + struct {
> + u64 all_idle_cnt;
> + u64 all_16bit_cnt;
> + };
> + };
> + u64 channel_cnt[MAX_CHANNEL_NUM]; /* To save a DMC bandwidth-monitor channel counter */
> +};
> +
> +struct dmc_pmu_hw_ops {
> + void (*enable)(struct dmc_hw_info *info);
> + void (*disable)(struct dmc_hw_info *info);
> + /* Bind an axi line to a bandwidth-monitor channel */
> + void (*config_axi_id)(struct dmc_hw_info *info, int axi_id, int chann);
> + int (*irq_handler)(struct dmc_hw_info *info,
> + struct dmc_counter *counter);
> + void (*get_counters)(struct dmc_hw_info *info,
> + struct dmc_counter *counter);
> +};
> +
> +struct dmc_hw_info {
> + struct dmc_pmu_hw_ops *ops;
> + void __iomem *ddr_reg[4];
> + unsigned long timer_value; /* Timer value in TIMER register */
> + void __iomem *pll_reg;
> + int irq_num; /* irq vector number */
> + int dmc_nr; /* The number of dmc controller */
> + int chann_nr; /* The number of dmc bandwidth monitor channels */
> + int id; /* The number of supported channels */
> + struct attribute **fmt_attr;
> +};
> +
> +struct ddr_pmu {
> + struct pmu pmu;
> + struct dmc_hw_info info;
> + struct dmc_counter counters; /* save counters from hw */
> + bool pmu_enabled;
> + struct device *dev;
> + char *name;
> + struct hlist_node node;
> + enum cpuhp_state cpuhp_state;
> + int cpu; /* for cpu hotplug */
> +};
> +
> +int aml_ddr_pmu_create(struct platform_device *pdev, struct ddr_pmu *pmu);
> +int aml_ddr_pmu_remove(struct platform_device *pdev);
> +
> +#endif /* __AML_DDR_PMU_H__ */