Re: [PATCH] mmc: sdhci-xenon: Fix 2G limitation on AC5 SoC

From: Vadym Kochan
Date: Wed Jul 27 2022 - 13:24:03 EST


Hi Florian,

On Tue, Jul 26, 2022 at 10:37:46AM -0700, Florian Fainelli wrote:
> On 7/26/22 10:07, Vadym Kochan wrote:
> > From: Elad Nachman <enachman@xxxxxxxxxxx>
> >
> > There is a limitation on AC5 SoC that mmc controller
> > can't have DMA access over 2G memory.
> >
> > Signed-off-by: Elad Nachman <enachman@xxxxxxxxxxx>
> > Signed-off-by: Vadym Kochan <vadym.kochan@xxxxxxxxxxx>
> > ---
> > drivers/mmc/host/sdhci-xenon.c | 13 +++++++++++++
> > 1 file changed, 13 insertions(+)
> >
> > diff --git a/drivers/mmc/host/sdhci-xenon.c b/drivers/mmc/host/sdhci-xenon.c
> > index 08e838400b52..666d06b58564 100644
> > --- a/drivers/mmc/host/sdhci-xenon.c
> > +++ b/drivers/mmc/host/sdhci-xenon.c
> > @@ -18,6 +18,7 @@
> > #include <linux/of.h>
> > #include <linux/pm.h>
> > #include <linux/pm_runtime.h>
> > +#include <linux/mm.h>
> >
> > #include "sdhci-pltfm.h"
> > #include "sdhci-xenon.h"
> > @@ -422,6 +423,8 @@ static int xenon_probe_params(struct platform_device *pdev)
> > struct xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
> > u32 sdhc_id, nr_sdhc;
> > u32 tuning_count;
> > + struct device_node *np = pdev->dev.of_node;
> > + struct sysinfo si;
> >
> > /* Disable HS200 on Armada AP806 */
> > if (priv->hw_version == XENON_AP806)
> > @@ -450,6 +453,15 @@ static int xenon_probe_params(struct platform_device *pdev)
> > }
> > priv->tuning_count = tuning_count;
> >
> > + si_meminfo(&si);
> > +
> > + if (of_device_is_compatible(np, "marvell,ac5-sdhci") &&
> > + ((si.totalram * si.mem_unit) > 0x80000000 /*2G*/)) {
>
> Why not limit the DMA mask of the device and ensure, that bounce buffers get used so you can still do DMA?
>
> Also, you ought to be able to describe that limitation using Device Tree (assuming this is an option) and declaring a dedicated bus node for the SDHCI controller and providing a suitable dma-ranges property, see: arch/arm/boot/dts/bcm2711.dtsi and the 'soc' node for such examples.
>
>

Do I understand correctly that the swiotlb will be used in case DMA
engine could not map the page in the specified range (limited by dma-ranges or
dma-mask) ?

>
> > + host->quirks |= SDHCI_QUIRK_BROKEN_DMA;
> > + host->quirks |= SDHCI_QUIRK_BROKEN_ADMA;
> > + dev_info(mmc_dev(mmc), "Disabling DMA because of 2GB DMA access limit.\n");
> > + }
> > +
> > return xenon_phy_parse_params(dev, host);
> > }
> >
> > @@ -682,6 +694,7 @@ static const struct of_device_id sdhci_xenon_dt_ids[] = {
> > { .compatible = "marvell,armada-ap807-sdhci", .data = (void *)XENON_AP807},
> > { .compatible = "marvell,armada-cp110-sdhci", .data = (void *)XENON_CP110},
> > { .compatible = "marvell,armada-3700-sdhci", .data = (void *)XENON_A3700},
> > + { .compatible = "marvell,ac5-sdhci", .data = (void *)XENON_AP806},
> > {}
> > };
> > MODULE_DEVICE_TABLE(of, sdhci_xenon_dt_ids);
>
>
> --
> Florian

Thanks,