Re: [PATCH] hwmon: (aquacomputer_d5next) Add support for Aquacomputer Quadro fan controller

From: Guenter Roeck
Date: Wed Jul 27 2022 - 09:01:08 EST

On Wed, Jul 27, 2022 at 12:06:05PM +0200, Aleksa Savic wrote:
> Extend aquacomputer_d5next driver to expose hardware temperature sensors
> and fans of the Aquacomputer Quadro fan controller, which communicates
> through a proprietary USB HID protocol. Implemented by Jack Doan [1].
>
> Four temperature sensors and PWM controllable fans are available. The
> liquid flow sensor is also exposed, implemented by Leonard Anderweit [2].
>
> Additionally, serial number, firmware version and power-on count are
> exposed through debugfs.
>
> This driver has been tested on x86_64.
>
> [1] https://github.com/aleksamagicka/aquacomputer_d5next-hwmon/pull/5
> [2] https://github.com/aleksamagicka/aquacomputer_d5next-hwmon/pull/9
>
> Originally-from: Jack Doan <me@xxxxxxxxxxxx>
> Originally-from: Leonard Anderweit <leonard.anderweit@xxxxxxxxx>
> Signed-off-by: Aleksa Savic <savicaleksa83@xxxxxxxxx>

Applied.

Thanks,
Guenter

> ---
> Documentation/hwmon/aquacomputer_d5next.rst | 17 +++--
> drivers/hwmon/Kconfig | 6 +-
> drivers/hwmon/aquacomputer_d5next.c | 69 +++++++++++++++++++--
> 3 files changed, 78 insertions(+), 14 deletions(-)
>
> diff --git a/Documentation/hwmon/aquacomputer_d5next.rst b/Documentation/hwmon/aquacomputer_d5next.rst
> index 717e28226cde..33649a1e3a05 100644
> --- a/Documentation/hwmon/aquacomputer_d5next.rst
> +++ b/Documentation/hwmon/aquacomputer_d5next.rst
> @@ -9,6 +9,7 @@ Supported devices:
> * Aquacomputer Farbwerk RGB controller
> * Aquacomputer Farbwerk 360 RGB controller
> * Aquacomputer Octo fan controller
> +* Aquacomputer Quadro fan controller
>
> Author: Aleksa Savic
>
> @@ -33,6 +34,9 @@ better suited for userspace tools.
> The Octo exposes four temperature sensors and eight PWM controllable fans, along
> with their speed (in RPM), power, voltage and current.
>
> +The Quadro exposes four temperature sensors, a flow sensor and four PWM controllable
> +fans, along with their speed (in RPM), power, voltage and current.
> +
> The Farbwerk and Farbwerk 360 expose four temperature sensors. Depending on the device,
> not all sysfs and debugfs entries will be available.
>
> @@ -45,13 +49,14 @@ the kernel and supports hotswapping.
> Sysfs entries
> -------------
>
> -================ =============================================
> +================ ==============================================
> temp[1-4]_input Temperature sensors (in millidegrees Celsius)
> -fan[1-2]_input Pump/fan speed (in RPM)
> -power[1-2]_input Pump/fan power (in micro Watts)
> -in[0-2]_input Pump/fan voltage (in milli Volts)
> -curr[1-2]_input Pump/fan current (in milli Amperes)
> -================ =============================================
> +fan[1-8]_input Pump/fan speed (in RPM) / Flow speed (in dL/h)
> +power[1-8]_input Pump/fan power (in micro Watts)
> +in[0-7]_input Pump/fan voltage (in milli Volts)
> +curr[1-8]_input Pump/fan current (in milli Amperes)
> +pwm[1-8] Fan PWM (0 - 255)
> +================ ==============================================
>
> Debugfs entries
> ---------------
> diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
> index fd2446cf343b..e70d9614bec2 100644
> --- a/drivers/hwmon/Kconfig
> +++ b/drivers/hwmon/Kconfig
> @@ -257,13 +257,13 @@ config SENSORS_AHT10
> will be called aht10.
>
> config SENSORS_AQUACOMPUTER_D5NEXT
> - tristate "Aquacomputer D5 Next, Octo, Farbwerk, and Farbwerk 360"
> + tristate "Aquacomputer D5 Next, Octo, Quadro, Farbwerk, and Farbwerk 360"
> depends on USB_HID
> select CRC16
> help
> If you say yes here you get support for sensors and fans of
> - the Aquacomputer D5 Next watercooling pump, Octo fan
> - controller, Farbwerk and Farbwerk 360 RGB controllers, where
> + the Aquacomputer D5 Next watercooling pump, Octo and Quadro fan
> + controllers, Farbwerk and Farbwerk 360 RGB controllers, where
> available.
>
> This driver can also be built as a module. If so, the module
> diff --git a/drivers/hwmon/aquacomputer_d5next.c b/drivers/hwmon/aquacomputer_d5next.c
> index 738a1df8eae6..66430553cc45 100644
> --- a/drivers/hwmon/aquacomputer_d5next.c
> +++ b/drivers/hwmon/aquacomputer_d5next.c
> @@ -1,6 +1,7 @@
> // SPDX-License-Identifier: GPL-2.0+
> /*
> - * hwmon driver for Aquacomputer devices (D5 Next, Farbwerk, Farbwerk 360, Octo)
> + * hwmon driver for Aquacomputer devices (D5 Next, Farbwerk, Farbwerk 360, Octo,
> + * Quadro)
> *
> * Aquacomputer devices send HID reports (with ID 0x01) every second to report
> * sensor values.
> @@ -21,17 +22,19 @@
>
> #define USB_VENDOR_ID_AQUACOMPUTER 0x0c70
> #define USB_PRODUCT_ID_FARBWERK 0xf00a
> +#define USB_PRODUCT_ID_QUADRO 0xf00d
> #define USB_PRODUCT_ID_D5NEXT 0xf00e
> #define USB_PRODUCT_ID_FARBWERK360 0xf010
> #define USB_PRODUCT_ID_OCTO 0xf011
>
> -enum kinds { d5next, farbwerk, farbwerk360, octo };
> +enum kinds { d5next, farbwerk, farbwerk360, octo, quadro };
>
> static const char *const aqc_device_names[] = {
> [d5next] = "d5next",
> [farbwerk] = "farbwerk",
> [farbwerk360] = "farbwerk360",
> - [octo] = "octo"
> + [octo] = "octo",
> + [quadro] = "quadro"
> };
>
> #define DRIVER_NAME "aquacomputer_d5next"
> @@ -97,6 +100,18 @@ static u8 octo_sensor_fan_offsets[] = { 0x7D, 0x8A, 0x97, 0xA4, 0xB1, 0xBE, 0xCB
> /* Fan speed registers in Octo control report (from 0-100%) */
> static u16 octo_ctrl_fan_offsets[] = { 0x5B, 0xB0, 0x105, 0x15A, 0x1AF, 0x204, 0x259, 0x2AE };
>
> +/* Register offsets for the Quadro fan controller */
> +#define QUADRO_POWER_CYCLES 0x18
> +#define QUADRO_NUM_FANS 4
> +#define QUADRO_NUM_SENSORS 4
> +#define QUADRO_SENSOR_START 0x34
> +#define QUADRO_CTRL_REPORT_SIZE 0x3c1
> +#define QUADRO_FLOW_SENSOR_OFFSET 0x6e
> +static u8 quadro_sensor_fan_offsets[] = { 0x70, 0x7D, 0x8A, 0x97 };
> +
> +/* Fan speed registers in Quadro control report (from 0-100%) */
> +static u16 quadro_ctrl_fan_offsets[] = { 0x36, 0x8b, 0xe0, 0x135 };
> +
> /* Labels for D5 Next */
> static const char *const label_d5next_temp[] = {
> "Coolant temp"
> @@ -124,7 +139,7 @@ static const char *const label_d5next_current[] = {
> "Fan current"
> };
>
> -/* Labels for Farbwerk, Farbwerk 360 and Octo temperature sensors */
> +/* Labels for Farbwerk, Farbwerk 360 and Octo and Quadro temperature sensors */
> static const char *const label_temp_sensors[] = {
> "Sensor 1",
> "Sensor 2",
> @@ -132,7 +147,7 @@ static const char *const label_temp_sensors[] = {
> "Sensor 4"
> };
>
> -/* Labels for Octo */
> +/* Labels for Octo and Quadro (except speed) */
> static const char *const label_fan_speed[] = {
> "Fan 1 speed",
> "Fan 2 speed",
> @@ -177,6 +192,15 @@ static const char *const label_fan_current[] = {
> "Fan 8 current"
> };
>
> +/* Labels for Quadro fan speeds */
> +static const char *const label_quadro_speeds[] = {
> + "Fan 1 speed",
> + "Fan 2 speed",
> + "Fan 3 speed",
> + "Fan 4 speed",
> + "Flow speed [dL/h]"
> +};
> +
> struct aqc_data {
> struct hid_device *hdev;
> struct device *hwmon_dev;
> @@ -197,6 +221,7 @@ struct aqc_data {
> int num_temp_sensors;
> int temp_sensor_start_offset;
> u16 power_cycle_count_offset;
> + u8 flow_sensor_offset;
>
> /* General info, same across all devices */
> u32 serial_number[2];
> @@ -334,6 +359,18 @@ static umode_t aqc_is_visible(const void *data, enum hwmon_sensor_types type, u3
> }
> break;
> case hwmon_fan:
> + switch (priv->kind) {
> + case quadro:
> + /* Special case to support flow sensor */
> + if (channel < priv->num_fans + 1)
> + return 0444;
> + break;
> + default:
> + if (channel < priv->num_fans)
> + return 0444;
> + break;
> + }
> + break;
> case hwmon_power:
> case hwmon_curr:
> if (channel < priv->num_fans)
> @@ -578,6 +615,9 @@ static int aqc_raw_event(struct hid_device *hdev, struct hid_report *report, u8
> priv->voltage_input[2] = get_unaligned_be16(data + D5NEXT_5V_VOLTAGE) * 10;
> priv->voltage_input[3] = get_unaligned_be16(data + D5NEXT_12V_VOLTAGE) * 10;
> break;
> + case quadro:
> + priv->speed_input[4] = get_unaligned_be16(data + priv->flow_sensor_offset);
> + break;
> default:
> break;
> }
> @@ -719,6 +759,24 @@ static int aqc_probe(struct hid_device *hdev, const struct hid_device_id *id)
> priv->voltage_label = label_fan_voltage;
> priv->current_label = label_fan_current;
> break;
> + case USB_PRODUCT_ID_QUADRO:
> + priv->kind = quadro;
> +
> + priv->num_fans = QUADRO_NUM_FANS;
> + priv->fan_sensor_offsets = quadro_sensor_fan_offsets;
> + priv->fan_ctrl_offsets = quadro_ctrl_fan_offsets;
> + priv->num_temp_sensors = QUADRO_NUM_SENSORS;
> + priv->temp_sensor_start_offset = QUADRO_SENSOR_START;
> + priv->power_cycle_count_offset = QUADRO_POWER_CYCLES;
> + priv->buffer_size = QUADRO_CTRL_REPORT_SIZE;
> + priv->flow_sensor_offset = QUADRO_FLOW_SENSOR_OFFSET;
> +
> + priv->temp_label = label_temp_sensors;
> + priv->speed_label = label_quadro_speeds;
> + priv->power_label = label_fan_power;
> + priv->voltage_label = label_fan_voltage;
> + priv->current_label = label_fan_current;
> + break;
> default:
> break;
> }
> @@ -774,6 +832,7 @@ static const struct hid_device_id aqc_table[] = {
> { HID_USB_DEVICE(USB_VENDOR_ID_AQUACOMPUTER, USB_PRODUCT_ID_FARBWERK) },
> { HID_USB_DEVICE(USB_VENDOR_ID_AQUACOMPUTER, USB_PRODUCT_ID_FARBWERK360) },
> { HID_USB_DEVICE(USB_VENDOR_ID_AQUACOMPUTER, USB_PRODUCT_ID_OCTO) },
> + { HID_USB_DEVICE(USB_VENDOR_ID_AQUACOMPUTER, USB_PRODUCT_ID_QUADRO) },
> { }
> };
>