Re: [PATCH v8 1/6] thermal: mediatek: Relocate driver to mediatek folder

From: Balsam CHIHI
Date: Wed Jul 27 2022 - 05:04:20 EST


On Wed, Jul 27, 2022 at 10:24 AM AngeloGioacchino Del Regno
<angelogioacchino.delregno@xxxxxxxxxxxxx> wrote:
>
> Il 26/07/22 15:55, Balsam CHIHI ha scritto:
> > Add Mediatek proprietary folder to upstream more thermal zone and cooler
> > drivers. Relocate the original thermal controller driver to it and rename
> > as soc_temp.c to show its purpose more clearly.
> >
> > Signed-off-by: Michael Kao <michael.kao@xxxxxxxxxxxx>
> > Signed-off-by: Ben Tseng <ben.tseng@xxxxxxxxxxxx>
> > Reviewed-by: Matthias Brugger <matthias.bgg@xxxxxxxxx>
> > Signed-off-by: Balsam CHIHI <bchihi@xxxxxxxxxxxx>
> > ---
> > drivers/thermal/Kconfig | 14 ++++-------
> > drivers/thermal/Makefile | 2 +-
> > drivers/thermal/mediatek/Kconfig | 23 +++++++++++++++++++
> > drivers/thermal/mediatek/Makefile | 1 +
> > .../{mtk_thermal.c => mediatek/soc_temp.c} | 0
> > 5 files changed, 29 insertions(+), 11 deletions(-)
> > create mode 100644 drivers/thermal/mediatek/Kconfig
> > create mode 100644 drivers/thermal/mediatek/Makefile
> > rename drivers/thermal/{mtk_thermal.c => mediatek/soc_temp.c} (100%)
> >
> > diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
> > index 0e5cc948373c..ecba8d6e313b 100644
> > --- a/drivers/thermal/Kconfig
> > +++ b/drivers/thermal/Kconfig
> > @@ -412,16 +412,10 @@ config DA9062_THERMAL
> > zone.
> > Compatible with the DA9062 and DA9061 PMICs.
> >
> > -config MTK_THERMAL
> > - tristate "Temperature sensor driver for mediatek SoCs"
> > - depends on ARCH_MEDIATEK || COMPILE_TEST
> > - depends on HAS_IOMEM
> > - depends on NVMEM || NVMEM=n
> > - depends on RESET_CONTROLLER
> > - default y
> > - help
> > - Enable this option if you want to have support for thermal management
> > - controller present in Mediatek SoCs
> > +menu "Mediatek thermal drivers"
> > +depends on ARCH_MEDIATEK || COMPILE_TEST
> > +source "drivers/thermal/mediatek/Kconfig"
> > +endmenu
> >
> > config AMLOGIC_THERMAL
> > tristate "Amlogic Thermal Support"
> > diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile
> > index def8e1a0399c..3c00e864ad55 100644
> > --- a/drivers/thermal/Makefile
> > +++ b/drivers/thermal/Makefile
> > @@ -55,7 +55,7 @@ obj-y += st/
> > obj-$(CONFIG_QCOM_TSENS) += qcom/
> > obj-y += tegra/
> > obj-$(CONFIG_HISI_THERMAL) += hisi_thermal.o
> > -obj-$(CONFIG_MTK_THERMAL) += mtk_thermal.o
> > +obj-$(CONFIG_MTK_THERMAL) += mediatek/
> > obj-$(CONFIG_GENERIC_ADC_THERMAL) += thermal-generic-adc.o
> > obj-$(CONFIG_UNIPHIER_THERMAL) += uniphier_thermal.o
> > obj-$(CONFIG_AMLOGIC_THERMAL) += amlogic_thermal.o
> > diff --git a/drivers/thermal/mediatek/Kconfig b/drivers/thermal/mediatek/Kconfig
> > new file mode 100644
> > index 000000000000..9c41e9079fc3
> > --- /dev/null
> > +++ b/drivers/thermal/mediatek/Kconfig
> > @@ -0,0 +1,23 @@
> > +config MTK_THERMAL
> > + tristate "MediaTek thermal drivers"
> > + depends on THERMAL_OF
> > + help
> > + This is the option for MediaTek thermal software
> > + solutions. Please enable corresponding options to
> > + get temperature information from thermal sensors or
> > + turn on throttle mechaisms for thermal mitigation.
>
> Sorry, I just noticed that the indentation must be fixed.
>
> help
> This is the option .....
>
> Thanks,
> Angelo
OK, It will be fixed ASAP.

Thanks,
Balsam.