[PATCH v2] dt-bindings: mmc: Set maximum documented operating frequency as 384MHz

From: Bhupesh Sharma
Date: Tue Jul 26 2022 - 04:45:47 EST


As Ulf noted in [1], the maximum operating frequency
documented in the mmc-controller device-tree bindings
should be updated to the maximum frequency supported
by the mmc controller(s).

Without this fix in place, the 'make dtbs_check' reports
issues with 'max-frequency' value for ipq8074 sdhci node:

arch/arm64/boot/dts/qcom/ipq8074-hk01.dtb: mmc@7824900:
max-frequency:0:0: 384000000 is greater than the maximum of 200000000

[1]. https://www.spinics.net/lists/kernel/msg4442049.html

Cc: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
Cc: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
Cc: Rob Herring <robh@xxxxxxxxxx>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@xxxxxxxxxx>
---
- v1 can be viewed here: https://lore.kernel.org/linux-arm-msm/20220725180916.2850228-1-bhupesh.sharma@xxxxxxxxxx/
- Rebased on linux-next/master

.../devicetree/bindings/mmc/mmc-controller.yaml | 13 ++++++++++---
1 file changed, 10 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/mmc/mmc-controller.yaml b/Documentation/devicetree/bindings/mmc/mmc-controller.yaml
index ff5ce89e5111..802e3ca8be4d 100644
--- a/Documentation/devicetree/bindings/mmc/mmc-controller.yaml
+++ b/Documentation/devicetree/bindings/mmc/mmc-controller.yaml
@@ -88,11 +88,18 @@ properties:
default: 1

max-frequency:
- description:
- Maximum operating frequency of the bus.
+ description: |
+ Maximum operating frequency of the bus:
+ - for eMMC, the maximum supported frequency is 200MHz,
+ - for SD/SDIO cards the SDR104 mode has a max supported
+ frequency of 208MHz,
+ - some mmc host controllers do support a max frequency upto
+ 384MHz.
+ So, lets keep the maximum supported value here.
+
$ref: /schemas/types.yaml#/definitions/uint32
minimum: 400000
- maximum: 200000000
+ maximum: 384000000

disable-wp:
$ref: /schemas/types.yaml#/definitions/flag
--
2.35.3