Re: Why set .suppress_bind_attrs even though .remove() implemented?

From: Conor.Dooley
Date: Mon Jul 25 2022 - 13:49:19 EST


On 22/07/2022 18:06, Marc Zyngier wrote:
> Hi Bjorn,
>
> On Fri, 22 Jul 2022 15:39:05 +0100,
> Bjorn Helgaas <helgaas@xxxxxxxxxx> wrote:
>>
>> [+cc Marc, can you clarify when we need irq_dispose_mapping()?]
>
> In general, interrupt controllers should not have to discard mappings
> themselves, just like they rarely create mappings themselves. That's
> usually a different layer that has created it (DT, for example).
>
> The problem is that these mappings persist even if the interrupt has
> been released by the driver (it called free_irq()), and the IRQ number
> can be further reused. The client driver could dispose of the mapping
> after having released the IRQ, but nobody does that in practice.
>
> From the point of view of the controller, there is no simple way to
> tell when an interrupt is "unused". And even if a driver was
> overzealous and called irq_dispose_mapping() on all the possible
> mappings (and made sure no mapping could be created in parallel), this
> could result in a bunch of dangling pointers should a client driver
> still have the interrupt requested.
>
> Fixing this is pretty hard, as IRQ descriptors are leaky (you can
> either have a pointer to one, or just an IRQ number -- they are
> strictly equivalent). So in general, being able to remove an interrupt
> controller driver is at best fragile, and I'm trying not to get more
> of this in the tree.
>

Sorry to butt back in here - but I am taking this to mean that rather
than add a remove callback for the microchip pci controller driver when
making it buildable as a module it would instead be better to forgo that
entirely and prevent unloading the module (since it does INTX & MSI).

Would that be an accurate assessment?
Thanks,
Conor.