[PATCH v3 03/11] net: phylink: Document MAC_(A)SYM_PAUSE

From: Sean Anderson
Date: Mon Jul 25 2022 - 11:38:06 EST


This documents the possible MLO_PAUSE_* settings which can result from
different combinations of MLO_(A)SYM_PAUSE. These are more-or-less a
direct consequence of Table 28B-2.

Signed-off-by: Sean Anderson <sean.anderson@xxxxxxxx>
---

Changes in v3:
- New

include/linux/phylink.h | 16 ++++++++++++++++
1 file changed, 16 insertions(+)

diff --git a/include/linux/phylink.h b/include/linux/phylink.h
index 6d06896fc20d..9629bcd594b1 100644
--- a/include/linux/phylink.h
+++ b/include/linux/phylink.h
@@ -21,6 +21,22 @@ enum {
MLO_AN_FIXED, /* Fixed-link mode */
MLO_AN_INBAND, /* In-band protocol */

+ /* MAC_SYM_PAUSE and MAC_ASYM_PAUSE correspond to the PAUSE and
+ * ASM_DIR bits used in autonegotiation, respectively. See IEEE802.3
+ * Annex 28B for more information.
+ *
+ * The following table lists the values of MLO_PAUSE_* (aside from
+ * MLO_PAUSE_AN) which might be requested depending on the results of
+ * autonegotiation or user configuration:
+ *
+ * MAC_SYM_PAUSE MAC_ASYM_PAUSE Valid pause modes
+ * ============= ============== ==============================
+ * 0 0 MLO_PAUSE_NONE
+ * 0 1 MLO_PAUSE_NONE, MLO_PAUSE_TX
+ * 1 0 MLO_PAUSE_NONE, MLO_PAUSE_TXRX
+ * 1 1 MLO_PAUSE_NONE, MLO_PAUSE_TXRX,
+ * MLO_PAUSE_RX
+ */
MAC_SYM_PAUSE = BIT(0),
MAC_ASYM_PAUSE = BIT(1),
MAC_10HD = BIT(2),
--
2.35.1.1320.gc452695387.dirty