Re: [PATCH V3 02/11] dt-bindings: pci: tegra: Convert to json-schema

From: Rob Herring
Date: Thu Jun 30 2022 - 17:05:01 EST


On Wed, Jun 29, 2022 at 11:34:26AM +0530, Vidya Sagar wrote:
> From: Thierry Reding <treding@xxxxxxxxxx>
>
> Convert the Tegra194 PCIe bindings from the free-form text format to
> json-schema.
>
> Signed-off-by: Vidya Sagar <vidyas@xxxxxxxxxx>
> Signed-off-by: Thierry Reding <treding@xxxxxxxxxx>
> ---
> V3:
> * New patch in this series. Added as part of addressing Rob's review
> comment to convert the existing .txt file to .yaml schema
>
> .../bindings/pci/nvidia,tegra194-pcie-ep.yaml | 239 ++++++++++++++++
> .../bindings/pci/nvidia,tegra194-pcie.txt | 245 -----------------
> .../bindings/pci/nvidia,tegra194-pcie.yaml | 254 ++++++++++++++++++
> .../devicetree/bindings/pci/snps,dw-pcie.yaml | 2 +-
> 4 files changed, 494 insertions(+), 246 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie-ep.yaml
> delete mode 100644 Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie.txt
> create mode 100644 Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie.yaml
>
> diff --git a/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie-ep.yaml b/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie-ep.yaml
> new file mode 100644
> index 000000000000..4f7cb7fe378e
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie-ep.yaml
> @@ -0,0 +1,239 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pci/nvidia,tegra194-pcie-ep.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: NVIDIA Tegra194 (and later) PCIe endpoint controller (Synopsys DesignWare Core based)
> +
> +maintainers:
> + - Thierry Reding <thierry.reding@xxxxxxxxx>
> + - Jon Hunter <jonathanh@xxxxxxxxxx>
> + - Vidya Sagar <vidyas@xxxxxxxxxx>
> +
> +description: |
> + This PCIe controller is based on the Synopsis Designware PCIe IP and thus inherits all the common

Wrap lines at 80 unless there's a benefit to a longer line.

> + properties defined in snps,dw-pcie-ep.yaml. Some of the controller instances are dual mode where
> + in they can work either in root port mode or endpoint mode but one at a time.
> +
> + On Tegra194, controllers C0, C4 and C5 support endpoint mode.
> +
> + Note: On Tegra194's P2972-0000 platform, only C5 controller can be enabled to operate in the
> + endpoint mode because of the way the platform is designed.
> +
> +properties:
> + compatible:
> + enum:
> + - nvidia,tegra194-pcie-ep
> +
> + reg:
> + items:
> + - description: controller's application logic registers
> + - description: iATU and DMA registers. This is where the iATU (internal Address Translation
> + Unit) registers of the PCIe core are made available for software access.
> + - description: The aperture where the root port's own configuration registers are available.
> + - description: Aperture used to map the remote root-complex' address space.
> +
> + reg-names:
> + items:
> + - const: appl
> + - const: atu_dma
> + - const: dbi
> + - const: addr_space
> +
> + interrupts:
> + items:
> + - description: controller interrupt

Just 'maxItems: 1' is enough.

> +
> + interrupt-names:
> + items:
> + - const: intr
> +
> + clocks:
> + items:
> + - description: module clock
> +
> + clock-names:
> + items:
> + - const: core
> +
> + resets:
> + items:
> + - description: APB bus interface reset
> + - description: module reset
> +
> + reset-names:
> + items:
> + - const: apb
> + - const: core
> +
> + reset-gpios:
> + description: Must contain a phandle to a GPIO controller followed by GPIO that is being used as
> + PERST input signal. Please refer to pci.txt document.
> +
> + phys:
> + minItems: 1
> + maxItems: 16

One per lane?

> +
> + phy-names:
> + minItems: 1
> + maxItems: 16
> + items:
> + pattern: "^p2u-[0-9]+$"
> +
> + power-domains:
> + description: |
> + A phandle to the node that controls power to the respective PCIe controller and a specifier
> + name for the PCIe controller. Following are the specifiers for the different PCIe
> + controllers:
> +
> + - TEGRA194_POWER_DOMAIN_PCIEX8B: C0
> + - TEGRA194_POWER_DOMAIN_PCIEX1A: C1
> + - TEGRA194_POWER_DOMAIN_PCIEX1A: C2
> + - TEGRA194_POWER_DOMAIN_PCIEX1A: C3
> + - TEGRA194_POWER_DOMAIN_PCIEX4A: C4
> + - TEGRA194_POWER_DOMAIN_PCIEX8A: C5
> +
> + these specifiers are defined in "include/dt-bindings/power/tegra194-powergate.h" file.
> +
> + interconnects:
> + items:
> + - description: memory read client
> + - description: memory write client
> +
> + interconnect-names:
> + items:
> + - const: dma-mem # read
> + - const: write
> +
> + dma-coherent: true
> +
> + num-ib-windows:
> + description: number of inbound address translation windows
> + maxItems: 1
> + deprecated: true
> +
> + num-ob-windows:
> + description: number of outbound address translation windows
> + maxItems: 1
> + deprecated: true
> +
> + nvidia,bpmp:
> + $ref: /schemas/types.yaml#/definitions/phandle-array
> + description: |
> + Must contain a pair of phandle to BPMP controller node followed by controller ID. Following
> + are the controller IDs for each controller:
> +
> + 0: C0
> + 1: C1
> + 2: C2
> + 3: C3
> + 4: C4
> + 5: C5
> + items:
> + - items:
> + - minimum: 0
> + maximum: 0xffffffff

That's already the limit. Just a description is fine.

> + - enum: [ 0, 1, 2, 3, 4, 5 ]

maximum: 5

> +
> + nvidia,aspm-cmrt-us:
> + description: Common Mode Restore Time for proper operation of ASPM to be specified in
> + microseconds
> +
> + nvidia,aspm-pwr-on-t-us:
> + description: Power On time for proper operation of ASPM to be specified in microseconds
> +
> + nvidia,aspm-l0s-entrance-latency-us:
> + description: ASPM L0s entrance latency to be specified in microseconds
> +
> + vddio-pex-ctl-supply:
> + description: A phandle to the regulator supply for PCIe side band signals.
> +
> + nvidia,refclk-select-gpios:
> + description: Must contain a phandle to a GPIO controller followed by GPIO that is being used to

Don't need generic description of the GPIO binding.

> + enable REFCLK to controller from host
> + $ref: /schemas/types.yaml#/definitions/phandle-array

Already has a type.

> +
> +allOf:
> + - $ref: "/schemas/pci/pci-ep.yaml#"
> +
> +unevaluatedProperties: false
> +
> +required:
> + - compatible
> + - reg
> + - reg-names
> + - num-ib-windows
> + - num-ob-windows
> + - interrupts
> + - interrupt-names
> + - clocks
> + - clock-names
> + - resets
> + - reset-names
> + - power-domains
> + - reset-gpios
> + - num-lanes
> + - phys
> + - phy-names
> + - nvidia,bpmp
> +
> +examples:
> + - |
> + #include <dt-bindings/clock/tegra194-clock.h>
> + #include <dt-bindings/gpio/tegra194-gpio.h>
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> + #include <dt-bindings/power/tegra194-powergate.h>
> + #include <dt-bindings/reset/tegra194-reset.h>
> +
> + bus@0 {
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges = <0x0 0x0 0x0 0x8 0x0>;
> +
> + pcie-ep@141a0000 {
> + compatible = "nvidia,tegra194-pcie-ep";
> + reg = <0x00 0x141a0000 0x0 0x00020000>, /* appl registers (128K) */
> + <0x00 0x3a040000 0x0 0x00040000>, /* iATU_DMA reg space (256K) */
> + <0x00 0x3a080000 0x0 0x00040000>, /* DBI reg space (256K) */
> + <0x1c 0x00000000 0x4 0x00000000>; /* Address Space (16G) */
> + reg-names = "appl", "atu_dma", "dbi", "addr_space";
> + interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */
> + interrupt-names = "intr";
> +
> + clocks = <&bpmp TEGRA194_CLK_PEX1_CORE_5>;
> + clock-names = "core";
> +
> + resets = <&bpmp TEGRA194_RESET_PEX1_CORE_5_APB>,
> + <&bpmp TEGRA194_RESET_PEX1_CORE_5>;
> + reset-names = "apb", "core";
> +
> + power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX8A>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&clkreq_c5_bi_dir_state>;
> +
> + nvidia,bpmp = <&bpmp 5>;
> +
> + nvidia,aspm-cmrt-us = <60>;
> + nvidia,aspm-pwr-on-t-us = <20>;
> + nvidia,aspm-l0s-entrance-latency-us = <3>;
> +
> + vddio-pex-ctl-supply = <&vdd_1v8ao>;
> +
> + reset-gpios = <&gpio TEGRA194_MAIN_GPIO(GG, 1) GPIO_ACTIVE_LOW>;
> +
> + nvidia,refclk-select-gpios = <&gpio_aon TEGRA194_AON_GPIO(AA, 5)
> + GPIO_ACTIVE_HIGH>;
> +
> + num-lanes = <8>;
> + num-ib-windows = <2>;
> + num-ob-windows = <8>;
> +
> + phys = <&p2u_nvhs_0>, <&p2u_nvhs_1>, <&p2u_nvhs_2>,
> + <&p2u_nvhs_3>, <&p2u_nvhs_4>, <&p2u_nvhs_5>,
> + <&p2u_nvhs_6>, <&p2u_nvhs_7>;
> +
> + phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3", "p2u-4",
> + "p2u-5", "p2u-6", "p2u-7";
> + };
> + };
> diff --git a/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie.txt b/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie.txt
> deleted file mode 100644
> index 8e4f9bfb316d..000000000000
> --- a/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie.txt
> +++ /dev/null
> @@ -1,245 +0,0 @@
> -NVIDIA Tegra PCIe controller (Synopsys DesignWare Core based)
> -
> -This PCIe controller is based on the Synopsis Designware PCIe IP
> -and thus inherits all the common properties defined in snps,dw-pcie.yaml and
> -snps,dw-pcie-ep.yaml.
> -Some of the controller instances are dual mode where in they can work either
> -in root port mode or endpoint mode but one at a time.
> -
> -Required properties:
> -- power-domains: A phandle to the node that controls power to the respective
> - PCIe controller and a specifier name for the PCIe controller. Following are
> - the specifiers for the different PCIe controllers
> - TEGRA194_POWER_DOMAIN_PCIEX8B: C0
> - TEGRA194_POWER_DOMAIN_PCIEX1A: C1
> - TEGRA194_POWER_DOMAIN_PCIEX1A: C2
> - TEGRA194_POWER_DOMAIN_PCIEX1A: C3
> - TEGRA194_POWER_DOMAIN_PCIEX4A: C4
> - TEGRA194_POWER_DOMAIN_PCIEX8A: C5
> - these specifiers are defined in
> - "include/dt-bindings/power/tegra194-powergate.h" file.
> -- reg: A list of physical base address and length pairs for each set of
> - controller registers. Must contain an entry for each entry in the reg-names
> - property.
> -- reg-names: Must include the following entries:
> - "appl": Controller's application logic registers
> - "config": As per the definition in snps,dw-pcie.yaml
> - "atu_dma": iATU and DMA registers. This is where the iATU (internal Address
> - Translation Unit) registers of the PCIe core are made available
> - for SW access.
> - "dbi": The aperture where root port's own configuration registers are
> - available
> -- interrupts: A list of interrupt outputs of the controller. Must contain an
> - entry for each entry in the interrupt-names property.
> -- interrupt-names: Must include the following entries:
> - "intr": The Tegra interrupt that is asserted for controller interrupts
> -- clocks: Must contain an entry for each entry in clock-names.
> - See ../clocks/clock-bindings.txt for details.
> -- clock-names: Must include the following entries:
> - - core
> -- resets: Must contain an entry for each entry in reset-names.
> - See ../reset/reset.txt for details.
> -- reset-names: Must include the following entries:
> - - apb
> - - core
> -- phys: Must contain a phandle to P2U PHY for each entry in phy-names.
> -- phy-names: Must include an entry for each active lane.
> - "p2u-N": where N ranges from 0 to one less than the total number of lanes
> -- nvidia,bpmp: Must contain a pair of phandle to BPMP controller node followed
> - by controller-id. Following are the controller ids for each controller.
> - 0: C0
> - 1: C1
> - 2: C2
> - 3: C3
> - 4: C4
> - 5: C5
> -- vddio-pex-ctl-supply: Regulator supply for PCIe side band signals
> -
> -RC mode:
> -- compatible: Tegra19x must contain "nvidia,tegra194-pcie"
> -- device_type: Must be "pci" for RC mode
> -- interrupt-names: Must include the following entries:
> - "msi": The Tegra interrupt that is asserted when an MSI is received
> -- bus-range: Range of bus numbers associated with this controller
> -- #address-cells: Address representation for root ports (must be 3)
> - - cell 0 specifies the bus and device numbers of the root port:
> - [23:16]: bus number
> - [15:11]: device number
> - - cell 1 denotes the upper 32 address bits and should be 0
> - - cell 2 contains the lower 32 address bits and is used to translate to the
> - CPU address space
> -- #size-cells: Size representation for root ports (must be 2)
> -- ranges: Describes the translation of addresses for root ports and standard
> - PCI regions. The entries must be 7 cells each, where the first three cells
> - correspond to the address as described for the #address-cells property
> - above, the fourth and fifth cells are for the physical CPU address to
> - translate to and the sixth and seventh cells are as described for the
> - #size-cells property above.
> - - Entries setup the mapping for the standard I/O, memory and
> - prefetchable PCI regions. The first cell determines the type of region
> - that is setup:
> - - 0x81000000: I/O memory region
> - - 0x82000000: non-prefetchable memory region
> - - 0xc2000000: prefetchable memory region
> - Please refer to the standard PCI bus binding document for a more detailed
> - explanation.
> -- #interrupt-cells: Size representation for interrupts (must be 1)
> -- interrupt-map-mask and interrupt-map: Standard PCI IRQ mapping properties
> - Please refer to the standard PCI bus binding document for a more detailed
> - explanation.
> -
> -EP mode:
> -In Tegra194, Only controllers C0, C4 & C5 support EP mode.
> -- compatible: Tegra19x must contain "nvidia,tegra194-pcie-ep"
> -- reg-names: Must include the following entries:
> - "addr_space": Used to map remote RC address space
> -- reset-gpios: Must contain a phandle to a GPIO controller followed by
> - GPIO that is being used as PERST input signal. Please refer to pci.txt
> - document.
> -
> -Optional properties:
> -- pinctrl-names: A list of pinctrl state names.
> - It is mandatory for C5 controller and optional for other controllers.
> - - "default": Configures PCIe I/O for proper operation.
> -- pinctrl-0: phandle for the 'default' state of pin configuration.
> - It is mandatory for C5 controller and optional for other controllers.
> -- supports-clkreq: Refer to Documentation/devicetree/bindings/pci/pci.txt
> -- nvidia,update-fc-fixup: This is a boolean property and needs to be present to
> - improve performance when a platform is designed in such a way that it
> - satisfies at least one of the following conditions thereby enabling root
> - port to exchange optimum number of FC (Flow Control) credits with
> - downstream devices
> - 1. If C0/C4/C5 run at x1/x2 link widths (irrespective of speed and MPS)
> - 2. If C0/C1/C2/C3/C4/C5 operate at their respective max link widths and
> - a) speed is Gen-2 and MPS is 256B
> - b) speed is >= Gen-3 with any MPS
> -- nvidia,aspm-cmrt-us: Common Mode Restore Time for proper operation of ASPM
> - to be specified in microseconds
> -- nvidia,aspm-pwr-on-t-us: Power On time for proper operation of ASPM to be
> - specified in microseconds
> -- nvidia,aspm-l0s-entrance-latency-us: ASPM L0s entrance latency to be
> - specified in microseconds
> -
> -RC mode:
> -- vpcie3v3-supply: A phandle to the regulator node that supplies 3.3V to the slot
> - if the platform has one such slot. (Ex:- x16 slot owned by C5 controller
> - in p2972-0000 platform).
> -- vpcie12v-supply: A phandle to the regulator node that supplies 12V to the slot
> - if the platform has one such slot. (Ex:- x16 slot owned by C5 controller
> - in p2972-0000 platform).
> -
> -EP mode:
> -- nvidia,refclk-select-gpios: Must contain a phandle to a GPIO controller
> - followed by GPIO that is being used to enable REFCLK to controller from host
> -
> -NOTE:- On Tegra194's P2972-0000 platform, only C5 controller can be enabled to
> -operate in the endpoint mode because of the way the platform is designed.
> -
> -Examples:
> -=========
> -
> -Tegra194 RC mode:
> ------------------
> -
> - pcie@14180000 {
> - compatible = "nvidia,tegra194-pcie";
> - power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX8B>;
> - reg = <0x00 0x14180000 0x0 0x00020000 /* appl registers (128K) */
> - 0x00 0x38000000 0x0 0x00040000 /* configuration space (256K) */
> - 0x00 0x38040000 0x0 0x00040000>; /* iATU_DMA reg space (256K) */
> - reg-names = "appl", "config", "atu_dma";
> -
> - #address-cells = <3>;
> - #size-cells = <2>;
> - device_type = "pci";
> - num-lanes = <8>;
> - linux,pci-domain = <0>;
> -
> - pinctrl-names = "default";
> - pinctrl-0 = <&pex_rst_c5_out_state>, <&clkreq_c5_bi_dir_state>;
> -
> - clocks = <&bpmp TEGRA194_CLK_PEX0_CORE_0>;
> - clock-names = "core";
> -
> - resets = <&bpmp TEGRA194_RESET_PEX0_CORE_0_APB>,
> - <&bpmp TEGRA194_RESET_PEX0_CORE_0>;
> - reset-names = "apb", "core";
> -
> - interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
> - <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */
> - interrupt-names = "intr", "msi";
> -
> - #interrupt-cells = <1>;
> - interrupt-map-mask = <0 0 0 0>;
> - interrupt-map = <0 0 0 0 &gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
> -
> - nvidia,bpmp = <&bpmp 0>;
> -
> - supports-clkreq;
> - nvidia,aspm-cmrt-us = <60>;
> - nvidia,aspm-pwr-on-t-us = <20>;
> - nvidia,aspm-l0s-entrance-latency-us = <3>;
> -
> - bus-range = <0x0 0xff>;
> - ranges = <0x81000000 0x0 0x38100000 0x0 0x38100000 0x0 0x00100000 /* downstream I/O (1MB) */
> - 0x82000000 0x0 0x38200000 0x0 0x38200000 0x0 0x01E00000 /* non-prefetchable memory (30MB) */
> - 0xc2000000 0x18 0x00000000 0x18 0x00000000 0x4 0x00000000>; /* prefetchable memory (16GB) */
> -
> - vddio-pex-ctl-supply = <&vdd_1v8ao>;
> - vpcie3v3-supply = <&vdd_3v3_pcie>;
> - vpcie12v-supply = <&vdd_12v_pcie>;
> -
> - phys = <&p2u_hsio_2>, <&p2u_hsio_3>, <&p2u_hsio_4>,
> - <&p2u_hsio_5>;
> - phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3";
> - };
> -
> -Tegra194 EP mode:
> ------------------
> -
> - pcie-ep@141a0000 {
> - compatible = "nvidia,tegra194-pcie-ep", "snps,dw-pcie-ep";
> - power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX8A>;
> - reg = <0x00 0x141a0000 0x0 0x00020000 /* appl registers (128K) */
> - 0x00 0x3a040000 0x0 0x00040000 /* iATU_DMA reg space (256K) */
> - 0x00 0x3a080000 0x0 0x00040000 /* DBI reg space (256K) */
> - 0x1c 0x00000000 0x4 0x00000000>; /* Address Space (16G) */
> - reg-names = "appl", "atu_dma", "dbi", "addr_space";
> -
> - num-lanes = <8>;
> - num-ib-windows = <2>;
> - num-ob-windows = <8>;
> -
> - pinctrl-names = "default";
> - pinctrl-0 = <&clkreq_c5_bi_dir_state>;
> -
> - clocks = <&bpmp TEGRA194_CLK_PEX1_CORE_5>;
> - clock-names = "core";
> -
> - resets = <&bpmp TEGRA194_RESET_PEX1_CORE_5_APB>,
> - <&bpmp TEGRA194_RESET_PEX1_CORE_5>;
> - reset-names = "apb", "core";
> -
> - interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */
> - interrupt-names = "intr";
> -
> - nvidia,bpmp = <&bpmp 5>;
> -
> - nvidia,aspm-cmrt-us = <60>;
> - nvidia,aspm-pwr-on-t-us = <20>;
> - nvidia,aspm-l0s-entrance-latency-us = <3>;
> -
> - vddio-pex-ctl-supply = <&vdd_1v8ao>;
> -
> - reset-gpios = <&gpio TEGRA194_MAIN_GPIO(GG, 1) GPIO_ACTIVE_LOW>;
> -
> - nvidia,refclk-select-gpios = <&gpio_aon TEGRA194_AON_GPIO(AA, 5)
> - GPIO_ACTIVE_HIGH>;
> -
> - phys = <&p2u_nvhs_0>, <&p2u_nvhs_1>, <&p2u_nvhs_2>,
> - <&p2u_nvhs_3>, <&p2u_nvhs_4>, <&p2u_nvhs_5>,
> - <&p2u_nvhs_6>, <&p2u_nvhs_7>;
> -
> - phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3", "p2u-4",
> - "p2u-5", "p2u-6", "p2u-7";
> - };
> diff --git a/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie.yaml b/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie.yaml
> new file mode 100644
> index 000000000000..4a49dddf33bb
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie.yaml
> @@ -0,0 +1,254 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pci/nvidia,tegra194-pcie.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: NVIDIA Tegra194 (and later) PCIe controller (Synopsys DesignWare Core based)
> +
> +maintainers:
> + - Thierry Reding <thierry.reding@xxxxxxxxx>
> + - Jon Hunter <jonathanh@xxxxxxxxxx>
> + - Vidya Sagar <vidyas@xxxxxxxxxx>
> +
> +description: |
> + This PCIe controller is based on the Synopsis Designware PCIe IP and thus inherits all the common
> + properties defined in snps,dw-pcie.yaml. Some of the controller instances are dual mode where in
> + they can work either in root port mode or endpoint mode but one at a time.
> +
> + See nvidia,tegra194-pcie-ep.yaml for details on the endpoint mode device tree bindings.
> +
> +properties:
> + compatible:
> + enum:
> + - nvidia,tegra194-pcie
> +
> + reg:
> + items:
> + - description: controller's application logic registers
> + - description: configuration registers
> + - description: iATU and DMA registers. This is where the iATU (internal Address Translation
> + Unit) registers of the PCIe core are made available for software access.
> + - description: The aperture where the root port's own configuration registers are available.
> +
> + reg-names:
> + items:
> + - const: appl
> + - const: config
> + - const: atu_dma
> + - const: dbi
> +
> + interrupts:
> + items:
> + - description: controller interrupt
> + - description: MSI interrupt
> +
> + interrupt-names:
> + items:
> + - const: intr
> + - const: msi
> +
> + clocks:
> + items:
> + - description: module clock
> +
> + clock-names:
> + items:
> + - const: core
> +
> + resets:
> + items:
> + - description: APB bus interface reset
> + - description: module reset
> +
> + reset-names:
> + items:
> + - const: apb
> + - const: core
> +
> + phys:
> + minItems: 1
> + maxItems: 16
> +
> + phy-names:
> + minItems: 1
> + maxItems: 16
> + items:
> + pattern: "^p2u-[0-9]+$"
> +
> + power-domains:
> + description: |
> + A phandle to the node that controls power to the respective PCIe controller and a specifier
> + name for the PCIe controller. Following are the specifiers for the different PCIe
> + controllers:
> +
> + - TEGRA194_POWER_DOMAIN_PCIEX8B: C0
> + - TEGRA194_POWER_DOMAIN_PCIEX1A: C1
> + - TEGRA194_POWER_DOMAIN_PCIEX1A: C2
> + - TEGRA194_POWER_DOMAIN_PCIEX1A: C3
> + - TEGRA194_POWER_DOMAIN_PCIEX4A: C4
> + - TEGRA194_POWER_DOMAIN_PCIEX8A: C5
> +
> + these specifiers are defined in "include/dt-bindings/power/tegra194-powergate.h" file.
> +
> + interconnects:
> + items:
> + - description: memory read client
> + - description: memory write client
> +
> + interconnect-names:
> + items:
> + - const: dma-mem # read
> + - const: write
> +
> + dma-coherent: true
> +
> + supports-clkreq:
> + description: see pci.txt for details
> +
> + nvidia,bpmp:
> + $ref: /schemas/types.yaml#/definitions/phandle-array
> + description: |
> + Must contain a pair of phandle to BPMP controller node followed by controller ID. Following
> + are the controller IDs for each controller:
> +
> + 0: C0
> + 1: C1
> + 2: C2
> + 3: C3
> + 4: C4
> + 5: C5
> + items:
> + - items:
> + - minimum: 0
> + maximum: 0xffffffff
> + - enum: [ 0, 1, 2, 3, 4, 5 ]
> +
> + nvidia,update-fc-fixup:
> + description: |
> + This is a boolean property and needs to be present to improve performance when a platform is
> + designed in such a way that it satisfies at least one of the following conditions thereby
> + enabling root port to exchange optimum number of FC (Flow Control) credits with downstream
> + devices:
> +
> + 1. If C0/C4/C5 run at x1/x2 link widths (irrespective of speed and MPS)
> + 2. If C0/C1/C2/C3/C4/C5 operate at their respective max link widths and
> + a) speed is Gen-2 and MPS is 256B
> + b) speed is >= Gen-3 with any MPS
> +
> + $ref: /schemas/types.yaml#/definitions/flag
> +
> + nvidia,aspm-cmrt-us:
> + description: Common Mode Restore Time for proper operation of ASPM to be specified in
> + microseconds
> +
> + nvidia,aspm-pwr-on-t-us:
> + description: Power On time for proper operation of ASPM to be specified in microseconds
> +
> + nvidia,aspm-l0s-entrance-latency-us:
> + description: ASPM L0s entrance latency to be specified in microseconds
> +
> + vddio-pex-ctl-supply:
> + description: A phandle to the regulator supply for PCIe side band signals.
> +
> + vpcie3v3-supply:
> + description: A phandle to the regulator node that supplies 3.3V to the slot if the platform has
> + one such slot. (Ex:- x16 slot owned by C5 controller in p2972-0000 platform).
> +
> + vpcie12v-supply:
> + description: A phandle to the regulator node that supplies 12V to the slot if the platform has
> + one such slot. (Ex:- x16 slot owned by C5 controller in p2972-0000 platform).
> +
> +allOf:
> + - $ref: "/schemas/pci/pci-bus.yaml#"
> + - $ref: "/schemas/pci/snps,dw-pcie.yaml#"
> +
> +unevaluatedProperties: false
> +
> +required:
> + - compatible
> + - reg
> + - reg-names
> + - interrupts
> + - interrupt-names
> + - interrupt-map
> + - interrupt-map-mask
> + - clocks
> + - clock-names
> + - resets
> + - reset-names
> + - power-domains
> + - bus-range
> + - ranges
> + - vddio-pex-ctl-supply
> + - num-lanes
> + - phys
> + - phy-names
> + - nvidia,bpmp
> +
> +examples:
> + - |
> + #include <dt-bindings/clock/tegra194-clock.h>
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> + #include <dt-bindings/power/tegra194-powergate.h>
> + #include <dt-bindings/reset/tegra194-reset.h>
> +
> + bus@0 {
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges = <0x0 0x0 0x0 0x8 0x0>;
> +
> + pcie@14180000 {
> + compatible = "nvidia,tegra194-pcie";
> + power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX8B>;
> + reg = <0x0 0x14180000 0x0 0x00020000>, /* appl registers (128K) */
> + <0x0 0x38000000 0x0 0x00040000>, /* configuration space (256K) */
> + <0x0 0x38040000 0x0 0x00040000>, /* iATU_DMA reg space (256K) */
> + <0x0 0x38080000 0x0 0x00040000>; /* DBI reg space (256K) */
> + reg-names = "appl", "config", "atu_dma", "dbi";
> +
> + #address-cells = <3>;
> + #size-cells = <2>;
> + device_type = "pci";
> + num-lanes = <8>;
> + linux,pci-domain = <0>;
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&pex_rst_c5_out_state>, <&clkreq_c5_bi_dir_state>;
> +
> + clocks = <&bpmp TEGRA194_CLK_PEX0_CORE_0>;
> + clock-names = "core";
> +
> + resets = <&bpmp TEGRA194_RESET_PEX0_CORE_0_APB>,
> + <&bpmp TEGRA194_RESET_PEX0_CORE_0>;
> + reset-names = "apb", "core";
> +
> + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
> + <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */
> + interrupt-names = "intr", "msi";
> +
> + #interrupt-cells = <1>;
> + interrupt-map-mask = <0 0 0 0>;
> + interrupt-map = <0 0 0 0 &gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
> +
> + nvidia,bpmp = <&bpmp 0>;
> +
> + supports-clkreq;
> + nvidia,aspm-cmrt-us = <60>;
> + nvidia,aspm-pwr-on-t-us = <20>;
> + nvidia,aspm-l0s-entrance-latency-us = <3>;
> +
> + bus-range = <0x0 0xff>;
> + ranges = <0x81000000 0x0 0x38100000 0x0 0x38100000 0x0 0x00100000>, /* downstream I/O */
> + <0x82000000 0x0 0x38200000 0x0 0x38200000 0x0 0x01e00000>, /* non-prefetch memory */
> + <0xc2000000 0x18 0x00000000 0x18 0x00000000 0x4 0x00000000>; /* prefetchable memory */
> +
> + vddio-pex-ctl-supply = <&vdd_1v8ao>;
> + vpcie3v3-supply = <&vdd_3v3_pcie>;
> + vpcie12v-supply = <&vdd_12v_pcie>;
> +
> + phys = <&p2u_hsio_2>, <&p2u_hsio_3>, <&p2u_hsio_4>,
> + <&p2u_hsio_5>;
> + phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3";
> + };
> + };
> diff --git a/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml b/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml
> index c90e5e2d25f6..7e0bf941fbfe 100644
> --- a/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml
> +++ b/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml
> @@ -35,7 +35,7 @@ properties:
> maxItems: 5
> items:
> enum: [ dbi, dbi2, config, atu, app, elbi, mgmt, ctrl, parf, cfg, link,
> - ulreg, smu, mpu, apb, phy ]
> + ulreg, smu, mpu, apb, phy, appl, atu_dma ]
>
> num-lanes:
> description: |
> --
> 2.17.1
>
>