Re: [PATCH v3 2/2] hwmon: acpi_power_meter: convert to hwmon_device_register_with_info

[Guenter Roeck]

On 6/30/22 07:49, LABBE Corentin wrote:
> Le Sat, May 21, 2022 at 06:52:15AM -0700, Guenter Roeck a écrit :
> > On 5/16/22 05:21, Guenter Roeck wrote:
> > > On 5/15/22 23:21, LABBE Corentin wrote:
> > > > Le Sun, May 15, 2022 at 05:29:54PM -0700, Guenter Roeck a écrit :
> > > > > On 5/15/22 12:36, LABBE Corentin wrote:
> > > > > > Le Wed, May 11, 2022 at 07:10:29PM -0700, Guenter Roeck a écrit :
> > > > > > > Corentin,
> > > > > > >
> > > > > > > On 5/8/22 23:30, Corentin Labbe wrote:
> > > > > > > > Booting lead to a hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
> > > > > > > > So let's convert the driver to use hwmon_device_register_with_info().
> > > > > > > >
> > > > > > > > Signed-off-by: Corentin Labbe <clabbe@xxxxxxxxxxxx>
> > > > > > > > ---
> > > > > > > [ ... ]
> > > > > > >
> > > > > > > > @@ -836,20 +740,20 @@ static void acpi_power_meter_notify(struct acpi_device *device, u32 event)
> > > > > > > >              if (res)
> > > > > > > >                  break;
> > > > > > > > -        remove_attrs(resource);
> > > > > > > > +        remove_domain_devices(resource);
> > > > > > > >              setup_attrs(resource);
> > > > > > >
> > > > > > > Zhang Rui found an interesting problem with this code:
> > > > > > > It needs a call to sysfs_update_groups(hwmon_dev->groups)
> > > > > > > to update sysfs attribute visibility, probably between
> > > > > > > remove_domain_devices() and setup_attrs().
> > > > > > >
> > > > > > > >              break;
> > > > > > > >          case METER_NOTIFY_TRIP:
> > > > > > > > -        sysfs_notify(&device->dev.kobj, NULL, POWER_AVERAGE_NAME);
> > > > > > > > +        hwmon_notify_event(&device->dev, hwmon_power, hwmon_power_average, 0);
> > > > > > >
> > > > > > > ... which makes realize: The notification device should be the hwmon device.
> > > > > > > That would be resource->hwmon_dev, not the acpi device.
> > > > > >
> > > > > > Hello
> > > > > >
> > > > > > Since my hardware lacks capabilities testing this, I have emulated it on qemu:
> > > > > > https://github.com/montjoie/qemu/commit/320f2ddacb954ab308ef699f66fca6313f75bc2b
> > > > > >
> > > > > > I have added a custom ACPI _DBX method for triggering some ACPI state change. (like config change, like enabling CAP).
> > > > > >
> > > > > > For testing config change I have tried lot of way:
> > > > > >                    res = read_capabilities(resource);
> > > > > > @@ -742,18 +758,22 @@ static void acpi_power_meter_notify(struct acpi_device *device, u32 event)
> > > > > >                    remove_domain_devices(resource);
> > > > > >                    setup_attrs(resource);
> > > > > > +               res = sysfs_update_groups(&resource->hwmon_dev->kobj, acpi_power_groups);
> > > > > > +               res = sysfs_update_groups(&resource->acpi_dev->dev.kobj, acpi_power_groups);
> > > > > > +               res = hwmon_notify_event(resource->hwmon_dev, hwmon_power, hwmon_power_cap, 0);
> > > > > > +               res = hwmon_notify_event(resource->hwmon_dev, hwmon_power, hwmon_power_average, 0);
> > > > >
> > > > > Did you add a debug log here ?
> > > >
> > > > Yes I added debug log to check what is called.
> > > >
> > > > > acpi_power_groups would be the wrong parameter for sysfs_update_groups().
> > > > > It would have to be resource->hwmon_dev->groups.
> > > >
> > > > Even with that, no call to is_visible:
> > > > @@ -742,18 +758,22 @@ static void acpi_power_meter_notify(struct acpi_device *device, u32 event)
> > > >                   remove_domain_devices(resource);
> > > >                   setup_attrs(resource);
> > > > +               res = sysfs_update_groups(&resource->hwmon_dev->kobj, resource->hwmon_dev->groups);
> > > > +               res = sysfs_update_groups(&resource->acpi_dev->dev.kobj, resource->hwmon_dev->groups);
> > > > +               res = hwmon_notify_event(resource->hwmon_dev, hwmon_power, hwmon_power_cap, 0);
> > > > +               res = hwmon_notify_event(resource->hwmon_dev, hwmon_power, hwmon_power_average, 0);
> > > >                   break;
> > > >
> > > > I checked drivers/hwmon/hwmon.c is seems that is_visible is only called by gen_attr/gen_attrs which is only called by __hwmon_create_attrs and then by registers functions.
> > > > So perhaps it explain why it is never called.
> > >
> > > Ah yes, you are correct. Sorry, it has been too long ago that I wrote that code.
> > > Effectively that means we'll have to rework the hwmon core to generate attributes
> > > anyway and leave it up to the driver core to call the is_visible function.
> >
> > Attached is an outline of what would be needed in the hwmon core.
> > Completely untested. I wonder if it may be easier to always
> > create all attributes and have them return -ENODATA if not
> > supported.
> >
> > Guenter
>
>
> Hello
>
> Do you plan to send your change as patch ?
> My patch serie is stuck since now it depend on it.
>
> Or can I send a new iteration of my serie with partial support for notify.

Unfortunately I won't have time to work on this anytime soon.

Guenter