[PATCH v5 5/5] ata: libata-scsi: Cap ata_device->max_sectors according to shost->max_sectors

From: John Garry
Date: Thu Jun 30 2022 - 08:15:04 EST


ATA devices (struct ata_device) have a max_sectors field which is
configured internally in libata. This is then used to (re)configure the
associated sdev request queue max_sectors value from how it is earlier set
in __scsi_init_queue(). In __scsi_init_queue() the max_sectors value is set
according to shost limits, which includes host DMA mapping limits.

Cap the ata_device max_sectors according to shost->max_sectors to respect
this shost limit.

Signed-off-by: John Garry <john.garry@xxxxxxxxxx>
Acked-by: Damien Le Moal <damien.lemoal@xxxxxxxxxxxxxxxxxx>
---
drivers/ata/libata-scsi.c | 1 +
1 file changed, 1 insertion(+)

diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index 86dbb1cdfabd..24a43d540d9f 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -1060,6 +1060,7 @@ int ata_scsi_dev_config(struct scsi_device *sdev, struct ata_device *dev)
dev->flags |= ATA_DFLAG_NO_UNLOAD;

/* configure max sectors */
+ dev->max_sectors = min(dev->max_sectors, sdev->host->max_sectors);
blk_queue_max_hw_sectors(q, dev->max_sectors);

if (dev->class == ATA_DEV_ATAPI) {
--
2.35.3