[PATCH 2/6] pinctrl: sunxi: Add I/O bias setting for H6 R-PIO

From: Samuel Holland
Date: Sat Jun 25 2022 - 22:12:08 EST


H6 requires I/O bias configuration on both of its PIO devices.
Previously it was only done for the main PIO.

The setting for Port L is at bit 0, so the bank calculation needs to
account for the pin base. Otherwise the wrong bit is used.

Fixes: cc62383fcebe ("pinctrl: sunxi: Support I/O bias voltage setting on H6")
Signed-off-by: Samuel Holland <samuel@xxxxxxxxxxxx>
---

drivers/pinctrl/sunxi/pinctrl-sun50i-h6-r.c | 1 +
drivers/pinctrl/sunxi/pinctrl-sunxi.c | 7 ++++---
2 files changed, 5 insertions(+), 3 deletions(-)

diff --git a/drivers/pinctrl/sunxi/pinctrl-sun50i-h6-r.c b/drivers/pinctrl/sunxi/pinctrl-sun50i-h6-r.c
index c7d90c44e87a..7b4b9f3d4555 100644
--- a/drivers/pinctrl/sunxi/pinctrl-sun50i-h6-r.c
+++ b/drivers/pinctrl/sunxi/pinctrl-sun50i-h6-r.c
@@ -107,6 +107,7 @@ static const struct sunxi_pinctrl_desc sun50i_h6_r_pinctrl_data = {
.npins = ARRAY_SIZE(sun50i_h6_r_pins),
.pin_base = PL_BASE,
.irq_banks = 2,
+ .io_bias_cfg_variant = BIAS_VOLTAGE_PIO_POW_MODE_SEL,
};

static int sun50i_h6_r_pinctrl_probe(struct platform_device *pdev)
diff --git a/drivers/pinctrl/sunxi/pinctrl-sunxi.c b/drivers/pinctrl/sunxi/pinctrl-sunxi.c
index d9327d7d56ee..3c5e71359ca8 100644
--- a/drivers/pinctrl/sunxi/pinctrl-sunxi.c
+++ b/drivers/pinctrl/sunxi/pinctrl-sunxi.c
@@ -622,7 +622,7 @@ static int sunxi_pinctrl_set_io_bias_cfg(struct sunxi_pinctrl *pctl,
unsigned pin,
struct regulator *supply)
{
- unsigned short bank = pin / PINS_PER_BANK;
+ unsigned short bank;
unsigned long flags;
u32 val, reg;
int uV;
@@ -638,6 +638,9 @@ static int sunxi_pinctrl_set_io_bias_cfg(struct sunxi_pinctrl *pctl,
if (uV == 0)
return 0;

+ pin -= pctl->desc->pin_base;
+ bank = pin / PINS_PER_BANK;
+
switch (pctl->desc->io_bias_cfg_variant) {
case BIAS_VOLTAGE_GRP_CONFIG:
/*
@@ -655,8 +658,6 @@ static int sunxi_pinctrl_set_io_bias_cfg(struct sunxi_pinctrl *pctl,
else
val = 0xD; /* 3.3V */

- pin -= pctl->desc->pin_base;
-
reg = readl(pctl->membase + sunxi_grp_config_reg(pin));
reg &= ~IO_BIAS_MASK;
writel(reg | val, pctl->membase + sunxi_grp_config_reg(pin));
--
2.35.1