Re: [PATCH v5 2/5] irqchip: Add RZ/G2L IA55 Interrupt Controller driver

From: Lad, Prabhakar
Date: Sat Jun 25 2022 - 15:27:17 EST


Hi Marc,

On Sat, Jun 25, 2022 at 5:09 PM Marc Zyngier <maz@xxxxxxxxxx> wrote:
>
> On Sat, 25 Jun 2022 13:48:08 +0100,
> "Lad, Prabhakar" <prabhakar.csengg@xxxxxxxxx> wrote:
> >
> > Hi Marc,
> >
> > On Sat, Jun 25, 2022 at 1:08 PM Marc Zyngier <maz@xxxxxxxxxx> wrote:
> > >
> > > On Sat, 25 Jun 2022 11:54:44 +0100,
> > > "Lad, Prabhakar" <prabhakar.csengg@xxxxxxxxx> wrote:
> > > >
> > > > Hi Marc,
> > > >
> > > > Thank you for the review.
> > > >
> > > > On Sat, Jun 25, 2022 at 10:30 AM Marc Zyngier <maz@xxxxxxxxxx> wrote:
> > > > >
> > > > > On Mon, 23 May 2022 18:42:35 +0100,
> > > > > Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx> wrote:
> > > > > >
> > >
> > > [...]
> > >
> > > > > > +static int rzg2l_irqc_alloc(struct irq_domain *domain, unsigned int virq,
> > > > > > + unsigned int nr_irqs, void *arg)
> > > > > > +{
> > > > > > + struct rzg2l_irqc_priv *priv = domain->host_data;
> > > > > > + unsigned long *chip_data = NULL;
> > > > >
> > > > > Why the init to NULL?
> > > > >
> > > > Can be dropped.
> > > >
> > > > > > + struct irq_fwspec spec;
> > > > > > + irq_hw_number_t hwirq;
> > > > > > + int tint = -EINVAL;
> > > > > > + unsigned int type;
> > > > > > + unsigned int i;
> > > > > > + int ret;
> > > > > > +
> > > > > > + ret = irq_domain_translate_twocell(domain, arg, &hwirq, &type);
> > > > > > + if (ret)
> > > > > > + return ret;
> > > > > > +
> > > > > > + /*
> > > > > > + * For TINT interrupts ie where pinctrl driver is child of irqc domain
> > > > > > + * the hwirq and TINT are encoded in fwspec->param[0].
> > > > > > + * hwirq for TINT range from 9-40, hwirq is embedded 0-15 bits and TINT
> > > > > > + * from 16-31 bits. TINT from the pinctrl driver needs to be programmed
> > > > > > + * in IRQC registers to enable a given gpio pin as interrupt.
> > > > > > + */
> > > > > > + if (hwirq > IRQC_IRQ_COUNT) {
> > > > > > + tint = TINT_EXTRACT_GPIOINT(hwirq);
> > > > > > + hwirq = TINT_EXTRACT_HWIRQ(hwirq);
> > > > > > +
> > > > > > + if (hwirq < IRQC_TINT_START)
> > > > > > + return -EINVAL;
> > > > > > + }
> > > > > > +
> > > > > > + if (hwirq > (IRQC_NUM_IRQ - 1))
> > > > > > + return -EINVAL;
> > > > > > +
> > > > > > + chip_data = kzalloc(sizeof(*chip_data), GFP_KERNEL);
> > > > >
> > > > > Are we really allocating an unsigned long for something that already
> > > > > fits in something that is pointer-sized?
> > > > >
> > > > I think I received some feedback to use unsigned long. Let me know
> > > > what you want me to use here.
> > >
> > > I think this is just a waste of memory, but I don't really care.
> > >
> > Is there any better way I can handle it?
>
> How about (shock, horror) a cast?
>
Right I get you now..

> >
> > > >
> > > > > > + if (!chip_data)
> > > > > > + return -ENOMEM;
> > > > > > + *chip_data = tint;
> > > > >
> > > > > So here, *chip_data can be set to -EINVAL if hwirq <= IRQC_IRQ_COUNT?
> > > > > This can't be right.
> > > > >
> > > > Yes *chip_data can be -EINVAL. IRQC block handles IRQ0-7 and
> > > > GPIOINT0-122. So the -EINVAL here is for IRQ0-7 case were dont
> > > > required the chip data in the call backs hence -EINVAL, Whereas for
> > > > GPIOINT0-122 we need chip_data in the callbacks as this value needs to
> > > > be programmed in the hardware registers.
> > >
> > > I can't see anything that checks it (let alone the difference in
> > > types). And if it isn't checked, this means that the allocation is
> > > pointless.
> > >
> > There are checks for example below:
> >
> > static void rzg2l_irqc_irq_enable(struct irq_data *d)
> > {
> > unsigned int hw_irq = irqd_to_hwirq(d);
> >
> > if (hw_irq >= IRQC_TINT_START && hw_irq < IRQC_NUM_IRQ) {
> > struct rzg2l_irqc_priv *priv = irq_data_to_priv(d);
> > unsigned long chip_data = *(unsigned long *)d->chip_data;
> > u32 offset = hw_irq - IRQC_TINT_START;
> > u32 tssr_offset = TSSR_OFFSET(offset);
> > u8 tssr_index = TSSR_INDEX(offset);
> > u32 reg;
> >
> > raw_spin_lock(&priv->lock);
> > reg = readl_relaxed(priv->base + TSSR(tssr_index));
> > reg |= (TIEN | chip_data) << TSSEL_SHIFT(tssr_offset);
> > writel_relaxed(reg, priv->base + TSSR(tssr_index));
> > raw_spin_unlock(&priv->lock);
> > }
> > irq_chip_enable_parent(d);
> > }
> >
> > This check hw_irq >= IRQC_TINT_START && hw_irq < IRQC_NUM_IRQ here
> > would mean its GPIOINT0-122 and then the chip data will be used.
>
> That doesn't check the content of chip_data if outside of this
> condition. Nonetheless, you allocate an unsigned long to store
> -EINVAL. Not only this is a pointless allocation, but you use it to
> store something that you never retrieve the first place. Don't you see
> the problem?
>
... and when using cast I no longer need the allocation.

Cheers,
Prabhakar