Re: [PATCH 6/8] serial: 8250_dwlib: remove redundant sanity check for RS485 flags

From: Ilpo Järvinen
Date: Sat Jun 25 2022 - 06:21:55 EST


On Wed, 22 Jun 2022, Lino Sanfilippo wrote:

> From: Lino Sanfilippo <l.sanfilippo@xxxxxxxxxx>
>
> Before the drivers rs485_config() function is called the serial core
> already ensures that only one of both options RTS on send or RTS after send
> is set. So remove the concerning sanity check in the driver function to
> avoid redundancy.
>
> Signed-off-by: Lino Sanfilippo <l.sanfilippo@xxxxxxxxxx>
> ---
> drivers/tty/serial/8250/8250_dwlib.c | 10 ++--------
> 1 file changed, 2 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/tty/serial/8250/8250_dwlib.c b/drivers/tty/serial/8250/8250_dwlib.c
> index c83e7eaf3877..bed2bd6b7a01 100644
> --- a/drivers/tty/serial/8250/8250_dwlib.c
> +++ b/drivers/tty/serial/8250/8250_dwlib.c
> @@ -95,16 +95,10 @@ static int dw8250_rs485_config(struct uart_port *p, struct serial_rs485 *rs485)
> if (rs485->flags & SER_RS485_ENABLED) {
> tcr |= DW_UART_TCR_RS485_EN;
>
> - if (rs485->flags & SER_RS485_RX_DURING_TX) {
> + if (rs485->flags & SER_RS485_RX_DURING_TX)
> tcr |= DW_UART_TCR_XFER_MODE_DE_DURING_RE;
> - } else {
> - /* HW does not support same DE level for tx and rx */
> - if (!(rs485->flags & SER_RS485_RTS_ON_SEND) ==
> - !(rs485->flags & SER_RS485_RTS_AFTER_SEND))
> - return -EINVAL;
> -
> + else
> tcr |= DW_UART_TCR_XFER_MODE_DE_OR_RE;
> - }
> dw8250_writel_ext(p, DW_UART_DE_EN, 1);
> dw8250_writel_ext(p, DW_UART_RE_EN, 1);
> } else {
> --

Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@xxxxxxxxxxxxxxx>


--
i.