[PATCH 4/8] dmaengine: hisilicon: Use macros instead of magic number

From: Jie Hai
Date: Sat Jun 25 2022 - 03:45:24 EST


readl_relaxed_poll_timeout() uses magic numbers 10 and 1000, which
indicate maximum time to sleep between reads in us and timeout in us,
respectively.

Use macros HISI_DMA_POLL_Q_STS_DELAY_US and
HISI_DMA_POLL_Q_STS_TIME_OUT_US instead of these two numbers.

Signed-off-by: Jie Hai <haijie1@xxxxxxxxxx>
---
drivers/dma/hisi_dma.c | 21 +++++++++++++++------
1 file changed, 15 insertions(+), 6 deletions(-)

diff --git a/drivers/dma/hisi_dma.c b/drivers/dma/hisi_dma.c
index 0385419be8d5..d69a73272467 100644
--- a/drivers/dma/hisi_dma.c
+++ b/drivers/dma/hisi_dma.c
@@ -36,6 +36,9 @@

#define PCI_BAR_2 2

+#define HISI_DMA_POLL_Q_STS_DELAY_US 10
+#define HISI_DMA_POLL_Q_STS_TIME_OUT_US 1000
+
enum hisi_dma_mode {
EP = 0,
RC,
@@ -185,15 +188,20 @@ static void hisi_dma_reset_or_disable_hw_chan(struct hisi_dma_chan *chan,
{
struct hisi_dma_dev *hdma_dev = chan->hdma_dev;
u32 index = chan->qp_num, tmp;
+ void __iomem *addr;
int ret;

hisi_dma_pause_dma(hdma_dev, index, true);
hisi_dma_enable_dma(hdma_dev, index, false);
hisi_dma_mask_irq(hdma_dev, index);

- ret = readl_relaxed_poll_timeout(hdma_dev->base +
- HISI_DMA_Q_FSM_STS + index * HISI_DMA_OFFSET, tmp,
- FIELD_GET(HISI_DMA_FSM_STS_MASK, tmp) != RUN, 10, 1000);
+ addr = hdma_dev->base +
+ HISI_DMA_Q_FSM_STS + index * HISI_DMA_Q_OFFSET;
+
+ ret = readl_relaxed_poll_timeout(addr, tmp,
+ FIELD_GET(HISI_DMA_Q_FSM_STS_MASK, tmp) != RUN,
+ HISI_DMA_POLL_Q_STS_DELAY_US,
+ HISI_DMA_POLL_Q_STS_TIME_OUT_US);
if (ret) {
dev_err(&hdma_dev->pdev->dev, "disable channel timeout!\n");
WARN_ON(1);
@@ -208,9 +216,10 @@ static void hisi_dma_reset_or_disable_hw_chan(struct hisi_dma_chan *chan,
hisi_dma_unmask_irq(hdma_dev, index);
}

- ret = readl_relaxed_poll_timeout(hdma_dev->base +
- HISI_DMA_Q_FSM_STS + index * HISI_DMA_OFFSET, tmp,
- FIELD_GET(HISI_DMA_FSM_STS_MASK, tmp) == IDLE, 10, 1000);
+ ret = readl_relaxed_poll_timeout(addr, tmp,
+ FIELD_GET(HISI_DMA_Q_FSM_STS_MASK, tmp) == IDLE,
+ HISI_DMA_POLL_Q_STS_DELAY_US,
+ HISI_DMA_POLL_Q_STS_TIME_OUT_US);
if (ret) {
dev_err(&hdma_dev->pdev->dev, "reset channel timeout!\n");
WARN_ON(1);
--
2.33.0