[PATCH 7/7] media: dt-bindings: ov5693: document YAML binding

From: Tommaso Merciai
Date: Fri Jun 24 2022 - 19:03:56 EST


This patch adds documentation of device tree in YAML schema for the
OV5693 CMOS image sensor from Omnivision

Signed-off-by: Tommaso Merciai <tommaso.merciai@xxxxxxxxxxxxxxxxxxxx>
---
.../bindings/media/i2c/ovti,ov5693.yaml | 123 ++++++++++++++++++
MAINTAINERS | 1 +
2 files changed, 124 insertions(+)
create mode 100644 Documentation/devicetree/bindings/media/i2c/ovti,ov5693.yaml

diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov5693.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov5693.yaml
new file mode 100644
index 000000000000..1ee70af40000
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov5693.yaml
@@ -0,0 +1,123 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (c) 2022 Amarulasolutions
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/ovti,ov5693.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Omnivision OV5693 CMOS Sensor
+
+maintainers:
+ - Tommaso Merciai <tommaso.merciai@xxxxxxxxxxxxxxxxxxxx>
+
+allOf:
+ - $ref: /schemas/media/video-interface-devices.yaml#
+
+description: |
+ The Omnivision OV5693 is a high performance, 1/4-inch, 5 megapixel, CMOS
+ image sensor that delivers 2592x1944 at 30fps. It provides full-frame,
+ sub-sampled, and windowed 10-bit MIPI images in various formats via the
+ Serial Camera Control Bus (SCCB) interface.
+
+ Supports images sizes: 5 Mpixel, EIS1080p, 1080p, 720p, VGA, QVGA
+
+ OV5693 is programmable through I2C and two-wire Serial Camera Control Bus (SCCB).
+ The sensor output is available via CSI-2 serial data output (up to 2-lane).
+
+properties:
+ compatible:
+ const: ovti,ov5693
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ description:
+ System input clock (aka XVCLK). From 6 to 27 MHz.
+ maxItems: 1
+
+ dovdd-supply:
+ description:
+ Digital I/O voltage supply, 1.8V.
+
+ avdd-supply:
+ description:
+ Analog voltage supply, 2.8V.
+
+ dvdd-supply:
+ description:
+ Digital core voltage supply, 1.2V.
+
+ reset-gpios:
+ description:
+ The phandle and specifier for the GPIO that controls sensor reset.
+ This corresponds to the hardware pin XSHUTDN which is physically
+ active low.
+ maxItems: 1
+
+ port:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ additionalProperties: false
+
+ properties:
+ endpoint:
+ $ref: /schemas/media/video-interfaces.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ data-lanes:
+ minItems: 1
+ maxItems: 2
+
+ # Supports max data transfer of 900 Mbps per lane
+ link-frequencies: true
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - dovdd-supply
+ - avdd-supply
+ - dvdd-supply
+ - port
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/px30-cru.h>
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/pinctrl/rockchip.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ov5693: camera@36 {
+ compatible = "ovti,ov5693";
+ reg = <0x36>;
+
+ reset-gpios = <&gpio2 RK_PB1 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&cif_clkout_m0>;
+
+ clocks = <&cru SCLK_CIF_OUT>;
+ assigned-clocks = <&cru SCLK_CIF_OUT>;
+ assigned-clock-rates = <19200000>;
+
+ avdd-supply = <&vcc_1v8>;
+ dvdd-supply = <&vcc_1v2>;
+ dovdd-supply = <&vcc_2v8>;
+
+ rotation = <90>;
+ orientation = <0>;
+
+ port {
+ ucam_out: endpoint {
+ remote-endpoint = <&mipi_in_ucam>;
+ data-lanes = <1 2>;
+ link-frequencies = /bits/ 64 <450000000>;
+ };
+ };
+ };
+ };
\ No newline at end of file
diff --git a/MAINTAINERS b/MAINTAINERS
index 1fc9ead83d2a..844307cb20c4 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -14719,6 +14719,7 @@ M: Daniel Scally <djrscally@xxxxxxxxx>
L: linux-media@xxxxxxxxxxxxxxx
S: Maintained
T: git git://linuxtv.org/media_tree.git
+F: Documentation/devicetree/bindings/media/i2c/ovti,ov5693.yaml
F: drivers/media/i2c/ov5693.c

OMNIVISION OV5695 SENSOR DRIVER
--
2.25.1