Re: [PATCH V2 2/8] dt-bindings: arm64: ipq5018: Add binding descriptions for clock and reset

[Rob Herring]

On Tue, 21 Jun 2022 21:41:20 +0530, Sricharan R wrote:
> From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
> 
> This patch adds support for the global clock controller found on
> the IPQ5018 based devices.
> 
> Co-developed-by: Sricharan R <quic_srichara@xxxxxxxxxxx>
> Signed-off-by: Sricharan R <quic_srichara@xxxxxxxxxxx>
> Signed-off-by: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
> ---
>  .../bindings/clock/qcom,gcc-other.yaml        |   3 +
>  include/dt-bindings/clock/qcom,gcc-ipq5018.h  | 188 ++++++++++++++++++
>  include/dt-bindings/reset/qcom,gcc-ipq5018.h  | 122 ++++++++++++
>  3 files changed, 313 insertions(+)
>  create mode 100644 include/dt-bindings/clock/qcom,gcc-ipq5018.h
>  create mode 100644 include/dt-bindings/reset/qcom,gcc-ipq5018.h
> 

Running 'make dtbs_check' with the schema in this patch gives the
following warnings. Consider if they are expected or the schema is
incorrect. These may not be new warnings.

Note that it is not yet a requirement to have 0 warnings for dtbs_check.
This will change in the future.

Full log is available here: https://patchwork.ozlabs.org/patch/


gcc@1800000: '#power-domain-cells' is a required property
	arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dtb

gcc@1800000: Unevaluated properties are not allowed ('#clock-cells', '#reset-cells', 'clock-names', 'clocks', 'reg' were unexpected)
	arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dtb