Re: [PATCH v5 6/9] dt/bindings: drm/bridge: it6505: Add mode-switch support

From: Stephen Boyd
Date: Thu Jun 23 2022 - 15:33:13 EST


Quoting Prashant Malani (2022-06-23 11:37:08)
> On Thu, Jun 23, 2022 at 11:24 AM Stephen Boyd <swboyd@xxxxxxxxxxxx> wrote:
> >
> > Quoting Prashant Malani (2022-06-22 10:34:35)
> > > From: Pin-Yen Lin <treapking@xxxxxxxxxxxx>
> > >
> > > ITE IT6505 can be used in systems to switch USB Type-C DisplayPort
> > > alternate mode lane traffic between 2 Type-C ports.
> >
> > How does it work? From what I can tell from the information I find when
> > googling this part[1] and looking at the existing binding doc is that
> > this device is a DPI to DP bridge, and it outputs DP (probably 4 lanes
> > of it?). Does the 2 type-c port design work by transmitting DP on two
> > lanes of DP for one type-c port and another two lanes of DP for the
> > other type-c port?
> >
> > DP could be one lane, so if this device is able to output one lane on
> > any output differential pair then I suspect it could support 4 type-c
> > ports if the hardware engineer connected it that way. Can you confirm my
> > suspicion?
>
> I will let Pin-Yen comment re: this hardware, but 1-lane DP is not a
> supported Type-C Pin assignment
> (as per VESA DP Alternate Mode Spec version 2.0 [2]), so the H/W

Some missing link?

> configuration you are suggesting shouldn't be possible.
>

Alright, cool. But it is possible in the DP spec. So it seems like if
this is connected to 4 DP connectors it could be used to mux between DP
on 4 DP ports.